# Feedback **URL:** https://forum.gl-inet.com/c/feedback/25.md [Latest](https://forum.gl-inet.com/latest.md) · [Categories](https://forum.gl-inet.com/categories.md) · [Tags](https://forum.gl-inet.com/tags.md) --- ## [First impressions about 4.11 firmware on Flint2 (focused on mesh experience)](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864)
**Author:** [@AMirandola](https://forum.gl-inet.com/u/AMirandola)\ **Replies:** 8\ **Last updated:** [October 19, 2026, 9:33am UTC](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864 "2026-10-19T09:33:12Z")
Here are some impressions after installing version 4.11.1 beta (directly from 4.9.1 without a reset—essentially the worst-case scenario) and adding a second Flint2 in a mesh configuration, bought specifically for the occ… --- ## [Native SQM Seperate Ingress/Egress Shaping](https://forum.gl-inet.com/t/native-sqm-seperate-ingress-egress-shaping/71674)
**Author:** [@CiscoSucks](https://forum.gl-inet.com/u/CiscoSucks)\ **Replies:** 3\ **Last updated:** [October 9, 2026, 7:55am UTC](https://forum.gl-inet.com/t/native-sqm-seperate-ingress-egress-shaping/71674 "2026-10-09T07:55:42Z")
Hi! Just some feedback for a UI improvement on the native SQM page, currently just using sqm-luci to achieve this. but can you guys allow seperate download/upload shaping, example being I have 2Gbit down but only have … --- ## [AmneziaWG 3.0 protocol support](https://forum.gl-inet.com/t/amneziawg-3-0-protocol-support/70770)
**Author:** [@MrOhm](https://forum.gl-inet.com/u/MrOhm)\ **Replies:** 6\ **Last updated:** [October 8, 2026, 8:08am UTC](https://forum.gl-inet.com/t/amneziawg-3-0-protocol-support/70770 "2026-10-08T08:08:16Z")
Hi, AmneziaWG 3.0 protocol has been released, it would be great if support in BerylAX and other gl-inet router would be upgraded from 2.0 to 3.0 version. “We’ve rolled out a new app update. This release not only improv… --- ## [Glinet travel/cellular routers size review](https://forum.gl-inet.com/t/glinet-travel-cellular-routers-size-review/71796)
**Author:** [@bOcy](https://forum.gl-inet.com/u/bOcy)\ **Replies:** 1\ **Last updated:** [October 8, 2026, 6:59am UTC](https://forum.gl-inet.com/t/glinet-travel-cellular-routers-size-review/71796 "2026-10-08T06:59:58Z")
Congrats to glinet on new product line of kvms and remote access, cloud services. New mesh network and obfuscated vpn are good new features on router software as well. I post this pic of comparison of sizes of router… --- ## [I love my COMET GLINET pro devices! notes for improvments](https://forum.gl-inet.com/t/i-love-my-comet-glinet-pro-devices-notes-for-improvments/71448)
**Author:** [@eddie\_salinas](https://forum.gl-inet.com/u/eddie_salinas)\ **Replies:** 2\ **Last updated:** [September 21, 2026, 3:06am UTC](https://forum.gl-inet.com/t/i-love-my-comet-glinet-pro-devices-notes-for-improvments/71448 "2026-09-21T03:06:00Z")
Hi. I own 4 glinet COMET PRO devices and I love them! not only do they allow remote usage, but they cut down on monitors taking up space, having to be plugged in, using power, etc. Recently, I’ve upgraded some of my d… --- ## [Amnezia 3.x support](https://forum.gl-inet.com/t/amnezia-3-x-support/71404)
**Author:** [@raynes71](https://forum.gl-inet.com/u/raynes71)\ **Replies:** 1\ **Last updated:** [September 20, 2026, 6:36am UTC](https://forum.gl-inet.com/t/amnezia-3-x-support/71404 "2026-09-20T06:36:36Z")
AmneziaWG 3.x support for Flint 3 Hi GL.iNet team, I’m using a Flint 3 and really need proper support for the newer AmneziaWG 3.x versions. For users in restricted countries, this is becoming increasingly important. S… --- ## [Request for official STL/CAD file repository enabling community 3D printing of router cases, mounts, and travel accessories.](https://forum.gl-inet.com/t/request-for-official-stl-cad-file-repository-enabling-community-3d-printing-of-router-cases-mounts-and-travel-accessories/70725)
**Author:** [@ES\_Blofeld](https://forum.gl-inet.com/u/ES_Blofeld)\ **Replies:** 1\ **Last updated:** [August 25, 2026, 3:21am UTC](https://forum.gl-inet.com/t/request-for-official-stl-cad-file-repository-enabling-community-3d-printing-of-router-cases-mounts-and-travel-accessories/70725 "2026-08-25T03:21:46Z")
Hi Team, I've noticed several community threads requesting 3D-printable STL files for wall mounts, cases, and accessories across various router models (Slate 7, Mudi 7, Beryl, etc.). Currently, designs are scattered acr… --- ## [GL-iNet - scam addresses?](https://forum.gl-inet.com/t/gl-inet-scam-addresses/70756)
**Author:** [@robo\_1](https://forum.gl-inet.com/u/robo_1)\ **Replies:** 2\ **Last updated:** [August 25, 2026, 2:53am UTC](https://forum.gl-inet.com/t/gl-inet-scam-addresses/70756 "2026-08-25T02:53:55Z")
@Support Do you monitor search engines results? Those addresses appear in DDG on the first page. Are you aware of those websites --- ## [Feature suggestion VPN server rotation ](https://forum.gl-inet.com/t/feature-suggestion-vpn-server-rotation/70685)
**Author:** [@Golf](https://forum.gl-inet.com/u/Golf)\ **Replies:** 1\ **Last updated:** [August 20, 2026, 9:20am UTC](https://forum.gl-inet.com/t/feature-suggestion-vpn-server-rotation/70685 "2026-08-20T09:20:38Z")
Hi gl inet Is it possible to create VPN server rotation function for your routers ( flint, flint 2 ect ) automatically to select a new server from providers of proton , Nordvpn, ect if the VPN starts to run slow or con… --- ## [Feature Suggestions for better experiences (Portable Router)](https://forum.gl-inet.com/t/feature-suggestions-for-better-experiences-portable-router/70138)
**Author:** [@F0be12](https://forum.gl-inet.com/u/F0be12)\ **Replies:** 3\ **Last updated:** [August 20, 2026, 7:01am UTC](https://forum.gl-inet.com/t/feature-suggestions-for-better-experiences-portable-router/70138 "2026-08-20T07:01:06Z")
Hello GL.iNet Team I would like to submit some feature suggestions and bug reports for future firmware updates of portable routers, the Mudi 7, to improve the user experience. Native support for multiple virtual SSID… --- ## [request: Some UI improvements](https://forum.gl-inet.com/t/request-some-ui-improvements/70444)
**Author:** [@xize11](https://forum.gl-inet.com/u/xize11)\ **Replies:** 1\ **Last updated:** [August 10, 2026, 9:30am UTC](https://forum.gl-inet.com/t/request-some-ui-improvements/70444 "2026-08-10T09:30:02Z")
Hello, I'm trying to use various combinations of ACL rules in 4.9 firmware. But when I set a rule like: destination port: 47998-48000 48002 48010 47990 it then starts complaining it is invalid, but on OpenWrt traffi… --- ## [4.9.0 - Parental controls needs a manual mac address input](https://forum.gl-inet.com/t/4-9-0-parental-controls-needs-a-manual-mac-address-input/69687)
**Author:** [@kaserei](https://forum.gl-inet.com/u/kaserei)\ **Replies:** 4\ **Last updated:** [August 5, 2026, 8:19pm UTC](https://forum.gl-inet.com/t/4-9-0-parental-controls-needs-a-manual-mac-address-input/69687 "2026-08-05T20:19:53Z")
Hi, Just installed the 4.9.0 release on flint 2 and appreciate the simplified parental controls. However there are 2 legacy parts missing from the new feature set that were indispensable for me: Entering a profile dev… --- ## [Mudi 7 - Future Improvements](https://forum.gl-inet.com/t/mudi-7-future-improvements/70021)
**Author:** [@rockslide](https://forum.gl-inet.com/u/rockslide)\ **Replies:** 4\ **Last updated:** [July 29, 2026, 7:49pm UTC](https://forum.gl-inet.com/t/mudi-7-future-improvements/70021 "2026-07-29T19:49:43Z")
I have a few thoughts about the Mudi 7 and the potential improvements that could be made. The mudi replaced my old slate ax, a wifi dev board, and anker battery. The Mudi is definitely a fantastic improvement. Especi… --- ## [Mudi 7 sim for unlimited data in europe](https://forum.gl-inet.com/t/mudi-7-sim-for-unlimited-data-in-europe/68915)
**Author:** [@domb](https://forum.gl-inet.com/u/domb)\ **Replies:** 3\ **Last updated:** [July 29, 2026, 1:34am UTC](https://forum.gl-inet.com/t/mudi-7-sim-for-unlimited-data-in-europe/68915 "2026-07-29T01:34:14Z")
so i bought the mudi 7 for our family travels, ive always previsoly bought a esim from holafly and tethered my phone. got the mudi 7, tried to get an unlimted data for europe( family of 5!) and cant find anything?? has a… --- ## [Performance Firmware Minimum App base](https://forum.gl-inet.com/t/performance-firmware-minimum-app-base/69022)
**Author:** [@Dondi](https://forum.gl-inet.com/u/Dondi)\ **Replies:** 4\ **Last updated:** [July 26, 2026, 6:03pm UTC](https://forum.gl-inet.com/t/performance-firmware-minimum-app-base/69022 "2026-07-26T18:03:58Z")
It would be great if GL.iNet had a performance/privacy release without a number of the apps (Bark, DPI, Astrowarp, GoodCloud). Yes there are ways of removing / disabling apps, but it is not possible currently to make yo… --- ## [Suggestion about Mudi 7 (GL-E5800)](https://forum.gl-inet.com/t/suggestion-about-mudi-7-gl-e5800/68372)
**Author:** [@GiveMe5](https://forum.gl-inet.com/u/GiveMe5)\ **Replies:** 12\ **Last updated:** [July 24, 2026, 1:31am UTC](https://forum.gl-inet.com/t/suggestion-about-mudi-7-gl-e5800/68372 "2026-07-24T01:31:56Z")
I just got my new GL-E5800 and the product is great. I have the following suggestions about the device UI (touch screen and WebUI): Some easy way to display the current WAN IP on different WAN interfaces (Cellular, Et… --- ## [Introduce per-device tags](https://forum.gl-inet.com/t/introduce-per-device-tags/69469)
**Author:** [@adziahel](https://forum.gl-inet.com/u/adziahel)\ **Replies:** 7\ **Last updated:** [July 22, 2026, 8:22am UTC](https://forum.gl-inet.com/t/introduce-per-device-tags/69469 "2026-07-22T08:22:21Z")
Hi, what I miss here is discussion tags for devices, e.g. Flint 3|BE9300, so users would not resort to a full-text search to find relevant info. Thank you in advance. --- ## [Flint 2 port advertising 100 mbps again (second new device)](https://forum.gl-inet.com/t/flint-2-port-advertising-100-mbps-again-second-new-device/69850)
**Author:** [@tired100](https://forum.gl-inet.com/u/tired100)\ **Replies:** 1\ **Last updated:** [July 13, 2026, 11:12am UTC](https://forum.gl-inet.com/t/flint-2-port-advertising-100-mbps-again-second-new-device/69850 "2026-07-13T11:12:58Z")
After getting a replacement for a device defect and after less than a year of using the replacement, one of the WAN ports, once again, cannot advertise more than 100 mbps. I am now going to ask for a second time for an… --- ## [Bug Report: Cannot change device icon](https://forum.gl-inet.com/t/bug-report-cannot-change-device-icon/69764)
**Author:** [@VoxelPrismatic](https://forum.gl-inet.com/u/VoxelPrismatic)\ **Replies:** 2\ **Last updated:** [July 7, 2026, 2:52am UTC](https://forum.gl-inet.com/t/bug-report-cannot-change-device-icon/69764 "2026-07-07T02:52:04Z")
Description: Cannot change a client’s device icon/type. Server returns error 500. Steps to Reproduce: Log in Click in Clients tab Edit/Modify Client Select a new device icon/type Apply changes Observed behavior (what … --- ## [Questionable shopify redirect for main website](https://forum.gl-inet.com/t/questionable-shopify-redirect-for-main-website/69686)
**Author:** [@kaserei](https://forum.gl-inet.com/u/kaserei)\ **Replies:** 2\ **Last updated:** [July 3, 2026, 2:57pm UTC](https://forum.gl-inet.com/t/questionable-shopify-redirect-for-main-website/69686 "2026-07-03T14:57:43Z")
Hi, I use a pihole to block adverts and malicious websites. I recently gave up trying to block specific shopify malvertisers and blocked their whole shops.myshopify.com domain, and found I had no access to the https://ww… --- ## [Flint 2 GL-MT6000 Router PPPoE + VLAN Problem](https://forum.gl-inet.com/t/flint-2-gl-mt6000-router-pppoe-vlan-problem/69039)
**Author:** [@gugz786](https://forum.gl-inet.com/u/gugz786)\ **Replies:** 2\ **Last updated:** [May 29, 2026, 6:13am UTC](https://forum.gl-inet.com/t/flint-2-gl-mt6000-router-pppoe-vlan-problem/69039 "2026-05-29T06:13:47Z")
Hi, I have done various tests with the flint 2 router across many firmwares including flashing to immortalwrt/openwrt and tested all gl i net firmwares for the flint 2 and have discovered a major issue. The issue is eit… --- ## [Samba and NetBIOS](https://forum.gl-inet.com/t/samba-and-netbios/68736)
**Author:** [@thoughtcrimes](https://forum.gl-inet.com/u/thoughtcrimes)\ **Replies:** 1\ **Last updated:** [May 21, 2026, 3:54am UTC](https://forum.gl-inet.com/t/samba-and-netbios/68736 "2026-05-21T03:54:16Z")
Turns out that Samba and activating the possibility to connect to it from the WAN in the router opens port UDP 137. I got an email form my ISP telling me my connection could be put in quarantine if I didn’t resolve the i… --- ## [\[feature\] port flow control management](https://forum.gl-inet.com/t/feature-port-flow-control-management/68771)
**Author:** [@xize11](https://forum.gl-inet.com/u/xize11)\ **Replies:** 3\ **Last updated:** [May 20, 2026, 8:41am UTC](https://forum.gl-inet.com/t/feature-port-flow-control-management/68771 "2026-05-20T08:41:37Z")
Hello, So I'm battling quite some time now with my setup on non GL firmware, whenever I download on steam there is 80% chance the network goes down without any form of recovery. I learned that disabling HFO worked but … --- ## [Beryl 7 stuck on reset / cannot access admin](https://forum.gl-inet.com/t/beryl-7-stuck-on-reset-cannot-access-admin/68770)
**Author:** [@manassis](https://forum.gl-inet.com/u/manassis)\ **Replies:** 1\ **Last updated:** [May 17, 2026, 3:07pm UTC](https://forum.gl-inet.com/t/beryl-7-stuck-on-reset-cannot-access-admin/68770 "2026-05-17T15:07:27Z")
Hello, I have a GL.iNet Beryl 7 and I am currently unable to properly access or configure it. The device powers on normally and the LED is blinking (blue/teal light), and the Wi-Fi networks appear (GLMT3600BE-bb1 and G… --- ## [Mudi 7 wallpaper upload minor frontend bug](https://forum.gl-inet.com/t/mudi-7-wallpaper-upload-minor-frontend-bug/68645)
**Author:** [@tutugreen](https://forum.gl-inet.com/u/tutugreen)\ **Replies:** 1\ **Last updated:** [May 12, 2026, 8:38am UTC](https://forum.gl-inet.com/t/mudi-7-wallpaper-upload-minor-frontend-bug/68645 "2026-05-12T08:38:11Z")
Frontend minor bug: Steps to reproduce Go to SYSTEM -\> Display Management -\> Personalization -\> Wallpaper. Click Wallpaper/Style 1. A popup window appears and shows the current image. If a current image exists, c… --- ## [Expose wireguard servers endpoint on gl-sdk](https://forum.gl-inet.com/t/expose-wireguard-servers-endpoint-on-gl-sdk/68356)
**Author:** [@xize11](https://forum.gl-inet.com/u/xize11)\ **Replies:** 1\ **Last updated:** [April 27, 2026, 1:35am UTC](https://forum.gl-inet.com/t/expose-wireguard-servers-endpoint-on-gl-sdk/68356 "2026-04-27T01:35:57Z")
Hello, I think it would be nice to have the endpoint field inside the profiles section visible and it's port. As how the current behaviour is: Normally under the expected situation the profile peer gets automatically … --- ## [Need a better performing mini router than Shadow](https://forum.gl-inet.com/t/need-a-better-performing-mini-router-than-shadow/68360)
**Author:** [@Sofi](https://forum.gl-inet.com/u/Sofi)\ **Replies:** 1\ **Last updated:** [April 26, 2026, 3:30pm UTC](https://forum.gl-inet.com/t/need-a-better-performing-mini-router-than-shadow/68360 "2026-04-26T15:30:34Z")
Hi, I bought your Opal travel router on a friend’s recommendation in the past and absolutely loved it. I didn’t knew about the mini routers you offered then. So, I figured I’ll get the mini router as it would way more c… --- ## [Dausos Prootcol ](https://forum.gl-inet.com/t/dausos-prootcol/68223)
**Author:** [@ArmatoAnthony](https://forum.gl-inet.com/u/ArmatoAnthony)\ **Replies:** 2\ **Last updated:** [April 20, 2026, 1:22am UTC](https://forum.gl-inet.com/t/dausos-prootcol/68223 "2026-04-20T01:22:05Z")
Surfshark has a new protocol which allows faster connection speeds than WiteGuard. Are you planning on introducing this to your devices so we can take advantage of this on your devices ? Most VPN protocols were never bu… --- ## [Feature Request: NetBird integration for GL.iNet Flint and GL-KVM](https://forum.gl-inet.com/t/feature-request-netbird-integration-for-gl-inet-flint-and-gl-kvm/68197)
**Author:** [@Flo.H](https://forum.gl-inet.com/u/Flo.H)\ **Replies:** 1\ **Last updated:** [April 17, 2026, 2:09pm UTC](https://forum.gl-inet.com/t/feature-request-netbird-integration-for-gl-inet-flint-and-gl-kvm/68197 "2026-04-17T14:09:42Z")
Hello GL.iNet team, first of all, thanks for building great hardware. I'm a long-time user of the Flint series and I'm planning to add more GL-KVMs to my homelab. I'd like to submit a feature request: native NetBird cl… --- ## [About the Feedback category](https://forum.gl-inet.com/t/about-the-feedback-category/67592)
**Author:** [@bruce](https://forum.gl-inet.com/u/bruce)\ **Replies:** 0\ **Last updated:** [March 11, 2026, 10:05am UTC](https://forum.gl-inet.com/t/about-the-feedback-category/67592 "2026-03-11T10:05:55Z")
How can GL.iNet do better Like forum, official website, docs, and more Why do they do XYZ instead of ABC [Next page](https://forum.gl-inet.com/c/feedback/25.md?page=1)