# Cloud Services

**URL:** https://forum.gl-inet.com/c/goodcloud/14.md?page=1

[Latest](https://forum.gl-inet.com/latest.md) · [Categories](https://forum.gl-inet.com/categories.md) · [Tags](https://forum.gl-inet.com/tags.md)

**Page:** 2

---

## [Online offline loop device](https://forum.gl-inet.com/t/online-offline-loop-device/66745)

<div class="topic-metadata">

**Author:** [@digimap](https://forum.gl-inet.com/u/digimap)\
**Replies:** 11\
**Last updated:** [January 28, 2026, 9:32am UTC](https://forum.gl-inet.com/t/online-offline-loop-device/66745 "2026-01-28T09:32:49Z")

</div>

The device is online, I try to connect remotely and it goes offline. I wait, it comes back online, I try again and it goes offline. Could it be a power issue? The MT300N V2 has been powered by a router's USB cable …

---

## [GoodCloud Issues](https://forum.gl-inet.com/t/goodcloud-issues/65851)

<div class="topic-metadata">

**Author:** [@GiveMe5](https://forum.gl-inet.com/u/GiveMe5)\
**Replies:** 5\
**Last updated:** [December 3, 2025, 8:52am UTC](https://forum.gl-inet.com/t/goodcloud-issues/65851 "2025-12-03T08:52:49Z")

</div>

I found that I have 2 devices shown as offline, BE9300 & MT3000 after latest snapshot firmware update. From the Cloud log, I have: Thu Nov 20 14:52:31 2025 daemon.info gl-cloud\[23262\]: (gl-cloud:1290) lua-eco version: …

---

## [AstroWarp - P2P or Gateway](https://forum.gl-inet.com/t/astrowarp-p2p-or-gateway/65559)

<div class="topic-metadata">

**Author:** [@Spoon](https://forum.gl-inet.com/u/Spoon)\
**Replies:** 1\
**Last updated:** [November 16, 2025, 8:34pm UTC](https://forum.gl-inet.com/t/astrowarp-p2p-or-gateway/65559 "2025-11-16T20:34:34Z")

</div>

Hello, I’m trying AstroWarp and I have a question : Do we know in which case it will use P2P or the gateway ?

---

## [GoodCloud Remote GUI/LuCI Security Concern](https://forum.gl-inet.com/t/goodcloud-remote-gui-luci-security-concern/64339)

<div class="topic-metadata">

**Author:** [@ryser](https://forum.gl-inet.com/u/ryser)\
**Replies:** 3\
**Last updated:** [November 13, 2025, 3:45am UTC](https://forum.gl-inet.com/t/goodcloud-remote-gui-luci-security-concern/64339 "2025-11-13T03:45:55Z")

</div>

Hello, I have an X3000 added to GoodCloud and noticed that after upgrading from 4.7.4 to 4.8.2, when I use the “Remote GUI” option in GoodCloud, it now provides the option of selecting either HTTP or HTTPS to connect, w…

---

## [GoodCloud Disconnecting When on Secondary WAN (after failover)](https://forum.gl-inet.com/t/goodcloud-disconnecting-when-on-secondary-wan-after-failover/65353)

<div class="topic-metadata">

**Author:** [@monorailmedic](https://forum.gl-inet.com/u/monorailmedic)\
**Replies:** 2\
**Last updated:** [November 7, 2025, 1:57pm UTC](https://forum.gl-inet.com/t/goodcloud-disconnecting-when-on-secondary-wan-after-failover/65353 "2025-11-07T13:57:53Z")

</div>

BLUF: When on my secondary WAN connection, GoodCloud (on host device and others on the network) connects and disconnects repeatedly. Flint 2 (GL-MT6000) on 4.8.3 I have notifications set when any of my devices disconne…

---

## [Opinion Astro warp Kill switch ?? ](https://forum.gl-inet.com/t/opinion-astro-warp-kill-switch/65349)

<div class="topic-metadata">

**Author:** [@Sosmsab](https://forum.gl-inet.com/u/Sosmsab)\
**Replies:** 1\
**Last updated:** [November 7, 2025, 2:19am UTC](https://forum.gl-inet.com/t/opinion-astro-warp-kill-switch/65349 "2025-11-07T02:19:58Z")

</div>

Hello. I setup Astrowarp as i’m unable to host a Wireguard due to CGNAT. However, as many, my biggest fear is leaks of IP as i will be using it through the berylax while travelling so i really cannot have any leaks suc…

---

## [GoodCloud/GL.iNet Status Page](https://forum.gl-inet.com/t/goodcloud-gl-inet-status-page/41697)

<div class="topic-metadata">

**Author:** [@admon](https://forum.gl-inet.com/u/admon)\
**Replies:** 6\
**Last updated:** [October 27, 2025, 7:22pm UTC](https://forum.gl-inet.com/t/goodcloud-gl-inet-status-page/41697 "2025-10-27T19:22:08Z")

</div>

Hi there, since many people are asking about Is GoodCloud down right now?, I implemented some monitoring for the most used GL.iNet services. You can either visit the web version here: :link: status.glinet.admon.me …

---

## [GoodCloud shows devices online when actually offline](https://forum.gl-inet.com/t/goodcloud-shows-devices-online-when-actually-offline/64746)

<div class="topic-metadata">

**Author:** [@WizMeister](https://forum.gl-inet.com/u/WizMeister)\
**Replies:** 1\
**Last updated:** [October 15, 2025, 2:56am UTC](https://forum.gl-inet.com/t/goodcloud-shows-devices-online-when-actually-offline/64746 "2025-10-15T02:56:33Z")

</div>

There is an area wide failure of internet services which means all three Flint2 ‘s I am managing are offline (“No cable detected on Ethernet 1 (PPPoE). However, in GoodCloud all three devices appear online. Of course whe…

---

## [Inconsistent Server Error on Dashboard](https://forum.gl-inet.com/t/inconsistent-server-error-on-dashboard/64739)

<div class="topic-metadata">

**Author:** [@AlessandroLR](https://forum.gl-inet.com/u/AlessandroLR)\
**Replies:** 1\
**Last updated:** [October 14, 2025, 9:02am UTC](https://forum.gl-inet.com/t/inconsistent-server-error-on-dashboard/64739 "2025-10-14T09:02:52Z")

</div>

Hi, I’ve noticed that this morning I am getting random Server Errors when moving around the dashboard (Especially when I am doing API related things, like fetching all the devices etc). Is there a maintenance ongoing?

---

## [Goodcloud login with Google account](https://forum.gl-inet.com/t/goodcloud-login-with-google-account/64272)

<div class="topic-metadata">

**Author:** [@mikecurl](https://forum.gl-inet.com/u/mikecurl)\
**Replies:** 2\
**Last updated:** [October 13, 2025, 6:58am UTC](https://forum.gl-inet.com/t/goodcloud-login-with-google-account/64272 "2025-10-13T06:58:28Z")

</div>

Hi there, created a Goodcloud account on the web using my Google account which worked fine. However on the device (Beryl), there is no option to login to Goodcloud using the Google Account. Now I can’t create a new Go…

---

## [Cannot access any of my devices from goodcloud Remote GUI](https://forum.gl-inet.com/t/cannot-access-any-of-my-devices-from-goodcloud-remote-gui/59464)

<div class="topic-metadata">

**Author:** [@NCore](https://forum.gl-inet.com/u/NCore)\
**Replies:** 25\
**Last updated:** [October 11, 2025, 2:36pm UTC](https://forum.gl-inet.com/t/cannot-access-any-of-my-devices-from-goodcloud-remote-gui/59464 "2025-10-11T14:36:36Z")

</div>

Goodcloud.xyz shows that I have 15 devices online and one offline, but I cannot remote to any of those 15. The responded URL is Rttys "Oops... Device offline" I've cleared the cache on both FireFox and Chrome, both br…

---

## [Testing my point to point Astrowarp remotely](https://forum.gl-inet.com/t/testing-my-point-to-point-astrowarp-remotely/64581)

<div class="topic-metadata">

**Author:** [@tangledfoot](https://forum.gl-inet.com/u/tangledfoot)\
**Replies:** 1\
**Last updated:** [October 8, 2025, 12:55pm UTC](https://forum.gl-inet.com/t/testing-my-point-to-point-astrowarp-remotely/64581 "2025-10-08T12:55:44Z")

</div>

Brume 2 as exit node via astrowarp to Beryl and to lap top client. Im in France and have set up Astrowarp on both routers with the Brume set as exit nose. Obviously when tested I get my public IP in France. I need to tes…

---

## [Changing "Device Name" via GoodCloud Not Working](https://forum.gl-inet.com/t/changing-device-name-via-goodcloud-not-working/64246)

<div class="topic-metadata">

**Author:** [@ryser](https://forum.gl-inet.com/u/ryser)\
**Replies:** 6\
**Last updated:** [September 29, 2025, 3:46am UTC](https://forum.gl-inet.com/t/changing-device-name-via-goodcloud-not-working/64246 "2025-09-29T03:46:18Z")

</div>

I’m trying to change/update the “Device Name” property on an X3000 that I have in GoodCloud, by going to Bound Devices, selecting the router, then going to Settings \> Modify Settings \> System and then replacing the defau…

---

## [Goodcloud needs option to remove alert for Guest wifi connections](https://forum.gl-inet.com/t/goodcloud-needs-option-to-remove-alert-for-guest-wifi-connections/64161)

<div class="topic-metadata">

**Author:** [@zetix](https://forum.gl-inet.com/u/zetix)\
**Replies:** 1\
**Last updated:** [September 24, 2025, 9:00am UTC](https://forum.gl-inet.com/t/goodcloud-needs-option-to-remove-alert-for-guest-wifi-connections/64161 "2025-09-24T09:00:58Z")

</div>

Currently Goodcloud sends out alerts regardless of who connects to wifi, but with most devices now using Random MAC, we should have option to filter out guest client connections. I only want to know alerts to the defaul…

---

## [Astrowarp support for ipv6 traffic?](https://forum.gl-inet.com/t/astrowarp-support-for-ipv6-traffic/52359)

<div class="topic-metadata">

**Author:** [@seesam](https://forum.gl-inet.com/u/seesam)\
**Replies:** 4\
**Last updated:** [September 14, 2025, 6:56am UTC](https://forum.gl-inet.com/t/astrowarp-support-for-ipv6-traffic/52359 "2025-09-14T06:56:46Z")

</div>

Hi, Just setup a travel router that is succesfully routing traffic from my home router. However, this is all done via ip4 and without native ipv6 support. This is an issue as my employer flags this behaviour in the fire…

---

## [ This device was added by someone else](https://forum.gl-inet.com/t/this-device-was-added-by-someone-else/63774)

<div class="topic-metadata">

**Author:** [@pblgmz](https://forum.gl-inet.com/u/pblgmz)\
**Replies:** 1\
**Last updated:** [September 12, 2025, 9:20am UTC](https://forum.gl-inet.com/t/this-device-was-added-by-someone-else/63774 "2025-09-12T09:20:34Z")

</div>

Hello, I bouth a second hand mango router. I try to add to my goodcloud devices but I get following message: This device was added by someone else How can I get back the control of my device? Thank you in advance and…

---

## [Goodcloud SIM Card Traffic Monitoring on GL-X3000](https://forum.gl-inet.com/t/goodcloud-sim-card-traffic-monitoring-on-gl-x3000/62683)

<div class="topic-metadata">

**Author:** [@Ryebank](https://forum.gl-inet.com/u/Ryebank)\
**Replies:** 2\
**Last updated:** [August 27, 2025, 1:36pm UTC](https://forum.gl-inet.com/t/goodcloud-sim-card-traffic-monitoring-on-gl-x3000/62683 "2025-08-27T13:36:45Z")

</div>

There is a Notification option called "SIM Card Traffic Monitoring" and it allows notifications at a percentage of use - but I cannot find anywhere that you can set what the max data limit is. I have a SIM on a 500GB/Mo…

---

## [Can not access the remote control panels](https://forum.gl-inet.com/t/can-not-access-the-remote-control-panels/62908)

<div class="topic-metadata">

**Author:** [@Cli8310](https://forum.gl-inet.com/u/Cli8310)\
**Replies:** 2\
**Last updated:** [August 27, 2025, 3:06am UTC](https://forum.gl-inet.com/t/can-not-access-the-remote-control-panels/62908 "2025-08-27T03:06:39Z")

</div>

Recent days can not access the remote control, always show up device offline which is not, someone can help ?

---

## [Goodcloud does not show my GL KVM device](https://forum.gl-inet.com/t/goodcloud-does-not-show-my-gl-kvm-device/63323)

<div class="topic-metadata">

**Author:** [@caret](https://forum.gl-inet.com/u/caret)\
**Replies:** 1\
**Last updated:** [August 27, 2025, 2:57am UTC](https://forum.gl-inet.com/t/goodcloud-does-not-show-my-gl-kvm-device/63323 "2025-08-27T02:57:02Z")

</div>

Hello all! Goodcloud does not show my GL KVM device (GL RM 1), but it does show my router (AXT1800). Is this normal behavior?

---

## [Alarm Notifications](https://forum.gl-inet.com/t/alarm-notifications/58541)

<div class="topic-metadata">

**Author:** [@mspmanagement](https://forum.gl-inet.com/u/mspmanagement)\
**Replies:** 5\
**Last updated:** [August 22, 2025, 3:47am UTC](https://forum.gl-inet.com/t/alarm-notifications/58541 "2025-08-22T03:47:19Z")

</div>

I checked the manual on how to configure device online/offline notifications and the manual says "You can set email alarm when a device is online, offline, and new client connected. At left side -\> Notifications, create…

---

## [Astrowarp On Demand](https://forum.gl-inet.com/t/astrowarp-on-demand/62895)

<div class="topic-metadata">

**Author:** [@rnatalli](https://forum.gl-inet.com/u/rnatalli)\
**Replies:** 2\
**Last updated:** [August 18, 2025, 8:10pm UTC](https://forum.gl-inet.com/t/astrowarp-on-demand/62895 "2025-08-18T20:10:37Z")

</div>

Hi all. I've been using GL.iNet products for years, but only now dabbling in the cloud offerings. Is there a way on iOS devices to use the "On Demand" feature of the VPN? I've done this with the vanilla WireGuard app …

---

## [Device cannot connect to Goodcloud](https://forum.gl-inet.com/t/device-cannot-connect-to-goodcloud/62034)

<div class="topic-metadata">

**Author:** [@oha](https://forum.gl-inet.com/u/oha)\
**Replies:** 2\
**Last updated:** [August 13, 2025, 7:43pm UTC](https://forum.gl-inet.com/t/device-cannot-connect-to-goodcloud/62034 "2025-08-13T19:43:45Z")

</div>

Hello, I am having issues with some of the devices linked in Goodcloud. I noticed recently that they appear offline even though they are up and running. I tried disabling and enabling the Goodcloud feature from the de…

---

## [SSID based routing astrowarp](https://forum.gl-inet.com/t/ssid-based-routing-astrowarp/61446)

<div class="topic-metadata">

**Author:** [@jaynet](https://forum.gl-inet.com/u/jaynet)\
**Replies:** 1\
**Last updated:** [July 25, 2025, 3:44am UTC](https://forum.gl-inet.com/t/ssid-based-routing-astrowarp/61446 "2025-07-25T03:44:48Z")

</div>

Hi, I am looking at the setting up an astrowarp vpn between two different homes located in two different countries. Country A -----\> Country B However, I do not want all my internet to go through Country B, as I would…

---

## [Location on map](https://forum.gl-inet.com/t/location-on-map/35210)

<div class="topic-metadata">

**Author:** [@danielrevans4](https://forum.gl-inet.com/u/danielrevans4)\
**Replies:** 1\
**Last updated:** [July 24, 2025, 6:17am UTC](https://forum.gl-inet.com/t/location-on-map/35210 "2025-07-24T06:17:37Z")

</div>

Just signed up for GoodCloud and added my stationary Brume 2 and mobile SlateAX. However neither of them appeared on the giant main map that greets you when you log in. Should this automatically place your routers based…

---

## [Notifications not going to our email](https://forum.gl-inet.com/t/notifications-not-going-to-our-email/61339)

<div class="topic-metadata">

**Author:** [@mt24](https://forum.gl-inet.com/u/mt24)\
**Replies:** 1\
**Last updated:** [July 17, 2025, 11:07am UTC](https://forum.gl-inet.com/t/notifications-not-going-to-our-email/61339 "2025-07-17T11:07:06Z")

</div>

Notifications not going to our email, we setup to be notified when router is offline but don't receive email and checked spam/junk nothing. In GoodCloud we get notifications in upper right only.

---

## [GoodCloud - Multiple Users](https://forum.gl-inet.com/t/goodcloud-multiple-users/61047)

<div class="topic-metadata">

**Author:** [@rcontactless](https://forum.gl-inet.com/u/rcontactless)\
**Replies:** 1\
**Last updated:** [July 17, 2025, 7:46am UTC](https://forum.gl-inet.com/t/goodcloud-multiple-users/61047 "2025-07-17T07:46:13Z")

</div>

Are you able to have multi user logged into same account at the same time or do you have to share devices. As i was logged in then some one else logged in and i got kicked out

---

## [Can't binding any new routers to the cloud currently](https://forum.gl-inet.com/t/cant-binding-any-new-routers-to-the-cloud-currently/61211)

<div class="topic-metadata">

**Author:** [@kkbig](https://forum.gl-inet.com/u/kkbig)\
**Replies:** 2\
**Last updated:** [July 17, 2025, 7:39am UTC](https://forum.gl-inet.com/t/cant-binding-any-new-routers-to-the-cloud-currently/61211 "2025-07-17T07:39:20Z")

</div>

can't binding any new routers to the cloud currently

---

## [GoodCloud - Upgrading firmware](https://forum.gl-inet.com/t/goodcloud-upgrading-firmware/60830)

<div class="topic-metadata">

**Author:** [@butterfry](https://forum.gl-inet.com/u/butterfry)\
**Replies:** 3\
**Last updated:** [July 8, 2025, 5:29pm UTC](https://forum.gl-inet.com/t/goodcloud-upgrading-firmware/60830 "2025-07-08T17:29:30Z")

</div>

Hi support team, I want to bring a usability issue up with the new version of the goodcloud interface. Previously a settings template was not tied to a specific Device + Firmware version. Meaning, we could apply a temp…

---

## [GoodCloud](https://forum.gl-inet.com/t/goodcloud/60290)

<div class="topic-metadata">

**Author:** [@highgrade](https://forum.gl-inet.com/u/highgrade)\
**Replies:** 8\
**Last updated:** [July 3, 2025, 4:25am UTC](https://forum.gl-inet.com/t/goodcloud/60290 "2025-07-03T04:25:36Z")

</div>

I am showing my devices online but I am getting error message Oops... Device offline. I confirm my device is online I am currently connected to one of my device right now.

---

## [GoodCloud, I can't add more than one alert in notifications](https://forum.gl-inet.com/t/goodcloud-i-cant-add-more-than-one-alert-in-notifications/55926)

<div class="topic-metadata">

**Author:** [@igrvki](https://forum.gl-inet.com/u/igrvki)\
**Replies:** 2\
**Last updated:** [June 30, 2025, 8:27pm UTC](https://forum.gl-inet.com/t/goodcloud-i-cant-add-more-than-one-alert-in-notifications/55926 "2025-06-30T20:27:45Z")

</div>

Hello, I can't add more than one alert to notifications. Once I add an alert, the +ADD button turns gray, and it's no longer possible to add more alerts. The devices I have added in GoodCloud are a Beryl AX and a Slate…

[Previous page](https://forum.gl-inet.com/c/goodcloud/14.md)

[Next page](https://forum.gl-inet.com/c/goodcloud/14.md?page=2)
