# Latest **URL:** https://forum.gl-inet.com/latest.md [Latest](https://forum.gl-inet.com/latest.md) · [Categories](https://forum.gl-inet.com/categories.md) · [Tags](https://forum.gl-inet.com/tags.md) --- ## [Flint 3 4.10.1 New Vlans settings... PLEASE make the main network vlan changeable](https://forum.gl-inet.com/t/flint-3-4-10-1-new-vlans-settings-please-make-the-main-network-vlan-changeable/72046)
**Author:** [@RobWilJas](https://forum.gl-inet.com/u/RobWilJas)\ **Replies:** 23\ **Last updated:** [October 15, 2026, 10:01pm UTC](https://forum.gl-inet.com/t/flint-3-4-10-1-new-vlans-settings-please-make-the-main-network-vlan-changeable/72046 "2026-10-15T22:01:31Z")
I just upgraded to 4.10.1 on my Flint 3, and I love the new VLAN configuration in the firmware, but PLEASE PLEASE PLEASE allow us to change the main network off of VLAN1!!! VLAN1, the native VLAN should NOT have interne… --- ## [OpenWrt 25 Firmware Flint 2](https://forum.gl-inet.com/t/openwrt-25-firmware-flint-2/72087)
**Author:** [@Dondi](https://forum.gl-inet.com/u/Dondi)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 9:33pm UTC](https://forum.gl-inet.com/t/openwrt-25-firmware-flint-2/72087 "2026-10-15T21:33:33Z")
The last OpenWRT 25 Firmware for Flint 2 is from 2026-07-22. These builds provide the benefit of the GL.iNet GUI with the benefits of latest OpenWRT (current Linux kernel and open source elements). @bruce Could this… --- ## [Ver. 4.10.1 fails for BE3600](https://forum.gl-inet.com/t/ver-4-10-1-fails-for-be3600/71826)
**Author:** [@mrschwarz](https://forum.gl-inet.com/u/mrschwarz)\ **Replies:** 12\ **Last updated:** [October 15, 2026, 9:30pm UTC](https://forum.gl-inet.com/t/ver-4-10-1-fails-for-be3600/71826 "2026-10-15T21:30:43Z")
I tried to upgrade my Slate 7 (BE3600) to version 4.10.1 from 4.9.2. Here are some of the features/settings I am using: Starlink ISP is connected with Ethernet via a bridged Starlink router (Starlink mini). Tailscale o… --- ## [New Flint 3e (4.9.0): Tailscale exit node not working](https://forum.gl-inet.com/t/new-flint-3e-4-9-0-tailscale-exit-node-not-working/71673)
**Author:** [@chuckles67](https://forum.gl-inet.com/u/chuckles67)\ **Replies:** 14\ **Last updated:** [October 15, 2026, 9:02pm UTC](https://forum.gl-inet.com/t/new-flint-3e-4-9-0-tailscale-exit-node-not-working/71673 "2026-10-15T21:02:41Z")
I have set-up Tailscale exit nodes on other devices before and know the steps. Unboxed a new Flint3e yesterday and updated to 4.9.0 and enabled Tailscale with exit node. I triple checked the Tailscale portal has approv… --- ## [Failover algorithm doesnt work properly](https://forum.gl-inet.com/t/failover-algorithm-doesnt-work-properly/70773)
**Author:** [@mkdr](https://forum.gl-inet.com/u/mkdr)\ **Replies:** 12\ **Last updated:** [October 15, 2026, 8:34pm UTC](https://forum.gl-inet.com/t/failover-algorithm-doesnt-work-properly/70773 "2026-10-15T20:34:15Z")
I have set up multiple wireguard connection profiles as failover which is supported in fw 4.9.0, but it never works. I just had another wg server problem but the failover didnt work and I had to manually switch servers. … --- ## [Bug report: MediaTek HNAT offload caps Wi-Fi client WAN upload on a second Flint 4 (GL-BE14000, 4.9.1)](https://forum.gl-inet.com/t/bug-report-mediatek-hnat-offload-caps-wi-fi-client-wan-upload-on-a-second-flint-4-gl-be14000-4-9-1/71252)
**Author:** [@Pro4TLZZ](https://forum.gl-inet.com/u/Pro4TLZZ)\ **Replies:** 17\ **Last updated:** [October 15, 2026, 7:38pm UTC](https://forum.gl-inet.com/t/bug-report-mediatek-hnat-offload-caps-wi-fi-client-wan-upload-on-a-second-flint-4-gl-be14000-4-9-1/71252 "2026-10-15T19:38:47Z")
Firmware: 4.9.1 (be14000-4.9.1\_release2-1053-0722-1784729880.bin), OpenWrt 21.02-SNAPSHOT, BusyBox built 2025-10-10 Hardware: 2× GL-BE14000 (Flint 4), 10G backhaul via Sodola SL-SWTGW3C8F switch WAN service: ~900/900 M… --- ## [Cannot make port forwarding work on Flint 3e](https://forum.gl-inet.com/t/cannot-make-port-forwarding-work-on-flint-3e/72086)
**Author:** [@rimugu](https://forum.gl-inet.com/u/rimugu)\ **Replies:** 0\ **Last updated:** [October 15, 2026, 6:40pm UTC](https://forum.gl-inet.com/t/cannot-make-port-forwarding-work-on-flint-3e/72086 "2026-10-15T18:40:34Z")
Cannot make port forwarding work on Flint 3e Any tips? I have tried both the regular and the luci interface. No luck. Firmware is 4.9.0. No vpn config. (pretty much the only other config I have changed is using encryp… --- ## [GL-MT6000 (Flint 2) firmware v4.11 – can't log into UI via DDNS](https://forum.gl-inet.com/t/gl-mt6000-flint-2-firmware-v4-11-cant-log-into-ui-via-ddns/71648)
**Author:** [@ade234](https://forum.gl-inet.com/u/ade234)\ **Replies:** 32\ **Last updated:** [October 15, 2026, 5:21pm UTC](https://forum.gl-inet.com/t/gl-mt6000-flint-2-firmware-v4-11-cant-log-into-ui-via-ddns/71648 "2026-10-15T17:21:26Z")
Hi, having just updated to the new stable v4.11 o my Flint 2 I find that I can no longer log into the standard GLiNet UI via my DDNS URL. I get a 403 Forbidden error from the nginx/ 1.26.1 server as per the attached imag… --- ## [New Wifi SSID with VPN routing](https://forum.gl-inet.com/t/new-wifi-ssid-with-vpn-routing/72070)
**Author:** [@PegMan](https://forum.gl-inet.com/u/PegMan)\ **Replies:** 2\ **Last updated:** [October 15, 2026, 5:16pm UTC](https://forum.gl-inet.com/t/new-wifi-ssid-with-vpn-routing/72070 "2026-10-15T17:16:42Z")
Hi, tried a few searches but nothing I could follow or related. I’m looking to add a new Wifi SSID for dedicated VPN routing. Any ideas? Flint 2 --- ## [Flint 4: low Wi-Fi upload and a possible wired upload bottleneck on 4.11.0](https://forum.gl-inet.com/t/flint-4-low-wi-fi-upload-and-a-possible-wired-upload-bottleneck-on-4-11-0/71903)
**Author:** [@Rafaello](https://forum.gl-inet.com/u/Rafaello)\ **Replies:** 3\ **Last updated:** [October 15, 2026, 5:08pm UTC](https://forum.gl-inet.com/t/flint-4-low-wi-fi-upload-and-a-possible-wired-upload-bottleneck-on-4-11-0/71903 "2026-10-15T17:08:26Z")
Hello GL.iNet support, I am experiencing very low Wi-Fi upload speeds on both a Windows PC and an OPPO Find N5. I am also concerned that wired upload through the Flint 4 may be limited. My setup: Router: Flint 4 / G… --- ## [2 x 5ghz on same lan SSID](https://forum.gl-inet.com/t/2-x-5ghz-on-same-lan-ssid/72044)
**Author:** [@PegMan](https://forum.gl-inet.com/u/PegMan)\ **Replies:** 2\ **Last updated:** [October 15, 2026, 4:55pm UTC](https://forum.gl-inet.com/t/2-x-5ghz-on-same-lan-ssid/72044 "2026-10-15T16:55:35Z")
Hi, I was trying to achieve this setup but it failed in LUCI. It seemed to join the two 5ghz together rather than knowing I wanted to use two radios separately. Main Network SSID = ABC123 5ghz (160mhz) SSID = ABC123 … --- ## [Flint 4 BE-14000 Discussion Thread](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944)
**Author:** [@Galenjohn](https://forum.gl-inet.com/u/Galenjohn)\ **Replies:** 151\ **Last updated:** [October 15, 2026, 4:32pm UTC](https://forum.gl-inet.com/t/flint-4-be-14000-discussion-thread/70944 "2026-10-15T16:32:56Z")
Finally I received my Flint 4. DHL refused to deliver it on Saturday (more than 90% of their shipments they won’t deliver in the weekend just saying I was not at home). Package was a tiny bit damaged but the inside was… --- ## [RM1PE: Virtual Media freezes the target BIOS keyboard, drive never boots (same as #66265, logs attached)](https://forum.gl-inet.com/t/rm1pe-virtual-media-freezes-the-target-bios-keyboard-drive-never-boots-same-as-66265-logs-attached/71600)
**Author:** [@rpuls](https://forum.gl-inet.com/u/rpuls)\ **Replies:** 8\ **Last updated:** [October 15, 2026, 4:15pm UTC](https://forum.gl-inet.com/t/rm1pe-virtual-media-freezes-the-target-bios-keyboard-drive-never-boots-same-as-66265-logs-attached/71600 "2026-10-15T16:15:41Z")
Hi everyone, I'm new here. I bought a Comet PoE (GL-RM1PE) so I could install operating systems on a lab machine remotely, which is what the "install OS remotely" tutorial describes. Video, keyboard and mouse all work b… --- ## [Suggestion: Repeater mode disconnect from a network with no Internet connection](https://forum.gl-inet.com/t/suggestion-repeater-mode-disconnect-from-a-network-with-no-internet-connection/72084)
**Author:** [@F0be12](https://forum.gl-inet.com/u/F0be12)\ **Replies:** 0\ **Last updated:** [October 15, 2026, 2:40pm UTC](https://forum.gl-inet.com/t/suggestion-repeater-mode-disconnect-from-a-network-with-no-internet-connection/72084 "2026-10-15T14:40:16Z")
Since Repeater mode can automatically search for networks when the network is down, and there's internet detection, could there be an option to automatically disconnect from the router if there is no internet connection … --- ## [Core Issue: MediaTek Hardware Acceleration Conflict under IPV6 with Router Flint 4 And SFP+ module](https://forum.gl-inet.com/t/core-issue-mediatek-hardware-acceleration-conflict-under-ipv6-with-router-flint-4-and-sfp-module/72083)
**Author:** [@Kaneda](https://forum.gl-inet.com/u/Kaneda)\ **Replies:** 0\ **Last updated:** [October 15, 2026, 2:04pm UTC](https://forum.gl-inet.com/t/core-issue-mediatek-hardware-acceleration-conflict-under-ipv6-with-router-flint-4-and-sfp-module/72083 "2026-10-15T14:04:12Z")
Hello everyone. I have recently identified an issue that causes the IPv6 connection to fail or stall within the hardware acceleration engine (PPE) of the MediaTek Filogic processor in the Flint 4 router—specifically whe… --- ## [GL-BE14000 4.9.2: RCU stall in gl\_sdk4\_tertf (/proc/oui-tertf/term read) hangs router](https://forum.gl-inet.com/t/gl-be14000-4-9-2-rcu-stall-in-gl-sdk4-tertf-proc-oui-tertf-term-read-hangs-router/72072)
**Author:** [@y2kbug](https://forum.gl-inet.com/u/y2kbug)\ **Replies:** 2\ **Last updated:** [October 15, 2026, 1:50pm UTC](https://forum.gl-inet.com/t/gl-be14000-4-9-2-rcu-stall-in-gl-sdk4-tertf-proc-oui-tertf-term-read-hangs-router/72072 "2026-10-15T13:50:38Z")
Device: GL-BE14000, firmware 4.9.2 (OpenWrt 21.02-SNAPSHOT, kernel 5.4.281 aarch64, build Fri Oct 10 2025) Uptime before the event: about 14.5 days What happened At 04:58 the kernel reported “rcu\_sched self-detected sta… --- ## [GL-BE14000 4.11.0 Beta 4: kmod-batman-adv ABI mismatch](https://forum.gl-inet.com/t/gl-be14000-4-11-0-beta-4-kmod-batman-adv-abi-mismatch/72080)
**Author:** [@aurelien79](https://forum.gl-inet.com/u/aurelien79)\ **Replies:** 0\ **Last updated:** [October 15, 2026, 12:53pm UTC](https://forum.gl-inet.com/t/gl-be14000-4-11-0-beta-4-kmod-batman-adv-abi-mismatch/72080 "2026-10-15T12:53:32Z")
The kmod-batman-adv package installs successfully but cannot be loaded on the current Flint 4 beta firmware. Device: GL.iNet GL-BE14000 (Flint 4) Firmware: 4.11.0 Beta 4, OpenWrt 25 Kernel: 6.12.94 Package: kmod-batm… --- ## [Missing Telefónica Deutschland (o2) MBN profile on RG650V-EU (Mudi 7) — generic ROW\_Commercial used instead](https://forum.gl-inet.com/t/missing-telefonica-deutschland-o2-mbn-profile-on-rg650v-eu-mudi-7-generic-row-commercial-used-instead/71953)
**Author:** [@nicoe](https://forum.gl-inet.com/u/nicoe)\ **Replies:** 3\ **Last updated:** [October 15, 2026, 11:43am UTC](https://forum.gl-inet.com/t/missing-telefonica-deutschland-o2-mbn-profile-on-rg650v-eu-mudi-7-generic-row-commercial-used-instead/71953 "2026-10-15T11:43:59Z")
Hi, while debugging o2 Germany cellular behavior on my Mudi 7, I noticed that the Quectel RG650V-EU has no MBN profile for Telefónica Deutschland (o2, PLMN 26203) — one of the three major German carriers. o2 SIMs theref… --- ## [Flint 3e / Slate 7 Pro Combi and Obfuscation](https://forum.gl-inet.com/t/flint-3e-slate-7-pro-combi-and-obfuscation/72056)
**Author:** [@sniffer](https://forum.gl-inet.com/u/sniffer)\ **Replies:** 2\ **Last updated:** [October 15, 2026, 11:36am UTC](https://forum.gl-inet.com/t/flint-3e-slate-7-pro-combi-and-obfuscation/72056 "2026-10-15T11:36:07Z")
I purchased the Flint 3e & Slate 7 Pro because of the obfuscation capability. Not solely, but it was a major factor. So, before I return them to Amazon, I was hoping somebody might know the secret of how to get them to … --- ## [GL-S200 Thread Devices Not Respod](https://forum.gl-inet.com/t/gl-s200-thread-devices-not-respod/62151)
**Author:** [@lumiere](https://forum.gl-inet.com/u/lumiere)\ **Replies:** 36\ **Last updated:** [October 15, 2026, 10:49am UTC](https://forum.gl-inet.com/t/gl-s200-thread-devices-not-respod/62151 "2026-10-15T10:49:27Z")
Hi, I've noticed a strange issue with my GL-S200. I commissioned two devices that work properly at first, they respond to my requests and return values correctly. However, after about a day, they stop responding, and … --- ## [Flint GL-AX1800 ZeroTier for all Internet traffic](https://forum.gl-inet.com/t/flint-gl-ax1800-zerotier-for-all-internet-traffic/71740)
**Author:** [@lukaszlol1990](https://forum.gl-inet.com/u/lukaszlol1990)\ **Replies:** 41\ **Last updated:** [October 15, 2026, 10:29am UTC](https://forum.gl-inet.com/t/flint-gl-ax1800-zerotier-for-all-internet-traffic/71740 "2026-10-15T10:29:55Z")
Hello, My configuration is- Router Ax1800 at home with active Internet connection ( SIMPoYo uFi usb dongle) Active VPN client connection - Proton Active ZeroTier on router with default settings(turned on via interface… --- ## [VPN Client DNS leak when AdGuard Home is Turned ON](https://forum.gl-inet.com/t/vpn-client-dns-leak-when-adguard-home-is-turned-on/72025)
**Author:** [@lukaszlol1990](https://forum.gl-inet.com/u/lukaszlol1990)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 10:07am UTC](https://forum.gl-inet.com/t/vpn-client-dns-leak-when-adguard-home-is-turned-on/72025 "2026-10-15T10:07:01Z")
Hi, I am slowly giving up with gl inet routers. The issue is.. I did reset router to stock settings. Set up VPN client successfully with kill switch on… DNS used from VPN provider.. Sweat. I Turned Adguard Home… which… --- ## [Beryl AX with 4.11 and VLAN / Tailscale problems](https://forum.gl-inet.com/t/beryl-ax-with-4-11-and-vlan-tailscale-problems/71997)
**Author:** [@megabug](https://forum.gl-inet.com/u/megabug)\ **Replies:** 5\ **Last updated:** [October 15, 2026, 10:03am UTC](https://forum.gl-inet.com/t/beryl-ax-with-4-11-and-vlan-tailscale-problems/71997 "2026-10-15T10:03:26Z")
Hi, with firmware 4.11 and VLAN Support everything is fine as long Tailscale is not used. When using VLANS on LAN interface and active Tailscale, no internet access is available on VLANs. Anything I can fix myself? T… --- ## [GL-MT6000 (Flint 2) – GRO on WAN corrupts forwarded TCP traffic (same driver issue as Beryl AX?)](https://forum.gl-inet.com/t/gl-mt6000-flint-2-gro-on-wan-corrupts-forwarded-tcp-traffic-same-driver-issue-as-beryl-ax/72062)
**Author:** [@dev107](https://forum.gl-inet.com/u/dev107)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 9:55am UTC](https://forum.gl-inet.com/t/gl-mt6000-flint-2-gro-on-wan-corrupts-forwarded-tcp-traffic-same-driver-issue-as-beryl-ax/72062 "2026-10-15T09:55:10Z")
Hi everyone, I ran into data corruption on forwarded traffic with my Flint 2 and found a workaround. It looks related to the Beryl AX TSO/GSO report: Bug Report: Faulty TSO/GSO Implementation in Beryl AX Firmware 4.9.0 … --- ## [Xiaomi Pad 8 glkvm app reconnecting timeout (RM-10)](https://forum.gl-inet.com/t/xiaomi-pad-8-glkvm-app-reconnecting-timeout-rm-10/72064)
**Author:** [@thamch](https://forum.gl-inet.com/u/thamch)\ **Replies:** 3\ **Last updated:** [October 15, 2026, 9:27am UTC](https://forum.gl-inet.com/t/xiaomi-pad-8-glkvm-app-reconnecting-timeout-rm-10/72064 "2026-10-15T09:27:23Z")
The app is having reconnecting timeout when connecting via local network or via Internet. No problem accessing it via browser. Had tried all kind of settings in the tablet but still fail. Most probably is the app beha… --- ## [First impressions about 4.11 firmware on Flint2 (focused on mesh experience)](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864)
**Author:** [@AMirandola](https://forum.gl-inet.com/u/AMirandola)\ **Replies:** 6\ **Last updated:** [October 15, 2026, 9:11am UTC](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864 "2026-10-15T09:11:55Z")
Here are some impressions after installing version 4.11.1 beta (directly from 4.9.1 without a reset—essentially the worst-case scenario) and adding a second Flint2 in a mesh configuration, bought specifically for the occ… --- ## [Network Drop on CometQ after firmware update](https://forum.gl-inet.com/t/network-drop-on-cometq-after-firmware-update/71464)
**Author:** [@osmoonlight](https://forum.gl-inet.com/u/osmoonlight)\ **Replies:** 24\ **Last updated:** [October 15, 2026, 9:08am UTC](https://forum.gl-inet.com/t/network-drop-on-cometq-after-firmware-update/71464 "2026-10-15T09:08:53Z")
After update to firmware 1.8.5 Release 1 the CometQ is loosing all WiFi connections after a few minutes. No networks can be found, only a reboot can re-establish the connection. IP is given from the router as reservatio… --- ## [Mango 2 shipments](https://forum.gl-inet.com/t/mango-2-shipments/72055)
**Author:** [@PoweredByVeg](https://forum.gl-inet.com/u/PoweredByVeg)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 9:05am UTC](https://forum.gl-inet.com/t/mango-2-shipments/72055 "2026-10-15T09:05:48Z")
Hi, I pre ordered the Mango 2, when are these going to be shipped? Cheers --- ## [Flint 3: main Wi-Fi VAPs are not attached to br-lan after boot](https://forum.gl-inet.com/t/flint-3-main-wi-fi-vaps-are-not-attached-to-br-lan-after-boot/71971)
**Author:** [@Hydroxide8680](https://forum.gl-inet.com/u/Hydroxide8680)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 8:38am UTC](https://forum.gl-inet.com/t/flint-3-main-wi-fi-vaps-are-not-attached-to-br-lan-after-boot/71971 "2026-10-15T08:38:32Z")
Summary On a GL.iNet Flint 3 (GL-BE9300), the main 2.4, 5, and 6 GHz Wi-Fi networks advertise normally and accept client associations after a reboot, but the corresponding interfaces (wlan0, wlan1, and wlan2) are not att… --- ## [How to set up mesh network with VLANs](https://forum.gl-inet.com/t/how-to-set-up-mesh-network-with-vlans/71899)
**Author:** [@MHofer](https://forum.gl-inet.com/u/MHofer)\ **Replies:** 1\ **Last updated:** [October 15, 2026, 8:14am UTC](https://forum.gl-inet.com/t/how-to-set-up-mesh-network-with-vlans/71899 "2026-10-15T08:14:53Z")
Hello, I would like to set up the following network: My house has three levels: basement, ground floor, and upper floor. The internet connection is located in the basement, where I plan to place my main router — a Flin… [Next page](https://forum.gl-inet.com/latest.md?page=1)