# Latest **URL:** https://forum.gl-inet.com/latest.md?page=1 [Latest](https://forum.gl-inet.com/latest.md) · [Categories](https://forum.gl-inet.com/categories.md) · [Tags](https://forum.gl-inet.com/tags.md) **Page:** 2 --- ## [Glx-3000 bottlenecking](https://forum.gl-inet.com/t/glx-3000-bottlenecking/72134)
**Author:** [@Maxtosea](https://forum.gl-inet.com/u/Maxtosea)\ **Replies:** 0\ **Last updated:** [October 17, 2026, 6:03am UTC](https://forum.gl-inet.com/t/glx-3000-bottlenecking/72134 "2026-10-17T06:03:22Z")
So as mentioned in my other thread that is now closed I've finally had a chance to check with a desk too and laptop and it's still bottlenecking. Can you please send me a new unit so I can finally enjoy normal speeds aga… --- ## [Allow only specified MAC addresses to connect to Wi-Fi (MAC address filtering)](https://forum.gl-inet.com/t/allow-only-specified-mac-addresses-to-connect-to-wi-fi-mac-address-filtering/72104)
**Author:** [@doucettea](https://forum.gl-inet.com/u/doucettea)\ **Replies:** 2\ **Last updated:** [October 17, 2026, 5:41am UTC](https://forum.gl-inet.com/t/allow-only-specified-mac-addresses-to-connect-to-wi-fi-mac-address-filtering/72104 "2026-10-17T05:41:32Z")
I have both two GL-iNet travel routers and would like to limit only certain MAC addresses to connect to their Wi-Fi. (Right or wrong, this is for a network for a small group of friends and I don't want them to be able to… --- ## [Tailscale keeps overwriting local domain (dnsmasq) on Flint 2](https://forum.gl-inet.com/t/tailscale-keeps-overwriting-local-domain-dnsmasq-on-flint-2/70389)
**Author:** [@bpx51](https://forum.gl-inet.com/u/bpx51)\ **Replies:** 6\ **Last updated:** [October 17, 2026, 5:40am UTC](https://forum.gl-inet.com/t/tailscale-keeps-overwriting-local-domain-dnsmasq-on-flint-2/70389 "2026-10-17T05:40:09Z")
Hi everyone, I'm running into an issue on my Flint 2 where enabling Tailscale continuously breaks my local domain DNS resolution (.lan). When Tailscale is active, it automatically updates dnsmasq's Local domain setting… --- ## [Flint 4 4.11 beta 3 mesh issues](https://forum.gl-inet.com/t/flint-4-4-11-beta-3-mesh-issues/71759)
**Author:** [@nemetharon](https://forum.gl-inet.com/u/nemetharon)\ **Replies:** 4\ **Last updated:** [October 17, 2026, 5:39am UTC](https://forum.gl-inet.com/t/flint-4-4-11-beta-3-mesh-issues/71759 "2026-10-17T05:39:48Z")
Hi! I have a setup where a flint 4 is a main router and a flint 3 is a mesh node. I updated the flint 4 from beta 1 to beta 3 and noticed that under mesh the flint 3 was disappeared and I only say the onboarding screen.… --- ## [GL-BE14000 4.9.2: RCU stall in gl\_sdk4\_tertf (/proc/oui-tertf/term read) hangs router](https://forum.gl-inet.com/t/gl-be14000-4-9-2-rcu-stall-in-gl-sdk4-tertf-proc-oui-tertf-term-read-hangs-router/72072)
**Author:** [@y2kbug](https://forum.gl-inet.com/u/y2kbug)\ **Replies:** 4\ **Last updated:** [October 17, 2026, 5:39am UTC](https://forum.gl-inet.com/t/gl-be14000-4-9-2-rcu-stall-in-gl-sdk4-tertf-proc-oui-tertf-term-read-hangs-router/72072 "2026-10-17T05:39:11Z")
Device: GL-BE14000, firmware 4.9.2 (OpenWrt 21.02-SNAPSHOT, kernel 5.4.281 aarch64, build Fri Oct 10 2025) Uptime before the event: about 14.5 days What happened At 04:58 the kernel reported “rcu\_sched self-detected sta… --- ## [Will the Flint 3e get EasyMesh support?](https://forum.gl-inet.com/t/will-the-flint-3e-get-easymesh-support/72128)
**Author:** [@b94901142](https://forum.gl-inet.com/u/b94901142)\ **Replies:** 0\ **Last updated:** [October 17, 2026, 5:38am UTC](https://forum.gl-inet.com/t/will-the-flint-3e-get-easymesh-support/72128 "2026-10-17T05:38:54Z")
Hi, I’m aware that EasyMesh is currently not supported on the Flint 3e. However, I’d like to know if it’s on the roadmap for future firmware updates. Thanks! --- ## [V 4.11.0 and Wireguard to Fritz.Box](https://forum.gl-inet.com/t/v-4-11-0-and-wireguard-to-fritz-box/72127)
**Author:** [@cyclist](https://forum.gl-inet.com/u/cyclist)\ **Replies:** 0\ **Last updated:** [October 17, 2026, 5:22am UTC](https://forum.gl-inet.com/t/v-4-11-0-and-wireguard-to-fritz-box/72127 "2026-10-17T05:22:17Z")
hello, I've been using WireGuard from my Flint 2 to my offsite FRITZ! Box to tunnel all my internet traffic for a long while. It's a network-to-network connection, with a config originally created on the FRITZ! Box. Fr… --- ## [Flint 3 / 4.10.1: UDP DNS fails with AdGuard client handling and acceleration enabled; disabling acceleration restores DNS](https://forum.gl-inet.com/t/flint-3-4-10-1-udp-dns-fails-with-adguard-client-handling-and-acceleration-enabled-disabling-acceleration-restores-dns/72126)
**Author:** [@lchugh](https://forum.gl-inet.com/u/lchugh)\ **Replies:** 0\ **Last updated:** [October 17, 2026, 5:06am UTC](https://forum.gl-inet.com/t/flint-3-4-10-1-udp-dns-fails-with-adguard-client-handling-and-acceleration-enabled-disabling-acceleration-restores-dns/72126 "2026-10-17T05:06:51Z")
Hello GL.iNet Support, I am reporting a suspected interaction between Network Acceleration and "AdGuard Home Handle Client Requests" on my Flint 3. UDP DNS timed out while TCP DNS directly to AdGuard returned IP address… --- ## [GL.iNet Flint 2 (GL-MT6000) – MWAN3 Dual WAN Load Balancing Configuration Guide](https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-mwan3-dual-wan-load-balancing-configuration-guide/70235)
**Author:** [@GL6000](https://forum.gl-inet.com/u/GL6000)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 7:07pm UTC](https://forum.gl-inet.com/t/gl-inet-flint-2-gl-mt6000-mwan3-dual-wan-load-balancing-configuration-guide/70235 "2026-10-16T19:07:04Z")
GL.iNet Flint 2 (GL-MT6000) – Dual WAN Load Balancing Configuration Hardware Router: GL.iNet Flint 2 (GL-MT6000) Firmware version: 4.8.3 OpenWrt-based firmware Installed package: luci-app-mwan3 Network t… --- ## [USA certification?](https://forum.gl-inet.com/t/usa-certification/72067)
**Author:** [@beniamin](https://forum.gl-inet.com/u/beniamin)\ **Replies:** 6\ **Last updated:** [October 16, 2026, 6:59pm UTC](https://forum.gl-inet.com/t/usa-certification/72067 "2026-10-16T18:59:35Z")
So it's been a few months. 6 months since ban. What's going on? Why is it taking so long? I want to buy a Mango :mango: but no go. Can someone explain where gl.inet is in the process? It doesn't seem like the temporary… --- ## [Glinet MT6000 + PR-500KI: Get IPv6 via relay mode (new approach, replacing the hotplug script)](https://forum.gl-inet.com/t/glinet-mt6000-pr-500ki-relay-ipv6-hotplug/72121)
**Author:** [@snownight](https://forum.gl-inet.com/u/snownight)\ **Replies:** 0\ **Last updated:** [October 16, 2026, 6:30pm UTC](https://forum.gl-inet.com/t/glinet-mt6000-pr-500ki-relay-ipv6-hotplug/72121 "2026-10-16T18:30:34Z")
Test environment: GL.iNet MT6000 (OpenWrt) as a secondary router, upstream NTT PR-500KI (IPoE, only a single /64 is delegated, with no DHCPv6-PD) Comparison of principles and approaches PR-500KI provides only a single /64 prefix to downstream devices via RA (SLAAC), without prefix delegation (PD). MT6000 has no prefix that it can further assign to the LAN, so the usual "router mode" cannot obtain IPv6. The relay mode works as follows: the router does not delegate a prefix, but forwards the upstream RA to … --- ## [Beryl AX GL-MT3000 won't connect to my home wifi in repeater mode](https://forum.gl-inet.com/t/beryl-ax-gl-mt3000-wont-connect-to-my-home-wifi-in-repeater-mode/72114)
**Author:** [@seanb\_us](https://forum.gl-inet.com/u/seanb_us)\ **Replies:** 0\ **Last updated:** [October 16, 2026, 5:53pm UTC](https://forum.gl-inet.com/t/beryl-ax-gl-mt3000-wont-connect-to-my-home-wifi-in-repeater-mode/72114 "2026-10-16T17:53:48Z")
I got my new Beryl AX MT 3000 yesterday and unboxed today. I can get in and set the admin password and nothing more. I want to set this in repeater mode to use on the road to connect multiple devices to WiFi. The unit c… --- ## [Flint 3 (GL-BE9300) 4.10.1: Wi-Fi reload leaves wlan0 stuck ("unregister\_netdevice: waiting for wlan0 to become free"), only a reboot recovers](https://forum.gl-inet.com/t/flint-3-gl-be9300-4-10-1-wi-fi-reload-leaves-wlan0-stuck-unregister-netdevice-waiting-for-wlan0-to-become-free-only-a-reboot-recovers/72111)
**Author:** [@andreas1](https://forum.gl-inet.com/u/andreas1)\ **Replies:** 0\ **Last updated:** [October 16, 2026, 5:16pm UTC](https://forum.gl-inet.com/t/flint-3-gl-be9300-4-10-1-wi-fi-reload-leaves-wlan0-stuck-unregister-netdevice-waiting-for-wlan0-to-become-free-only-a-reboot-recovers/72111 "2026-10-16T17:16:13Z")
Device / firmware GL-BE9300 (Flint 3), firmware 4.10.1 (build 2026-09-18 18:54:58), OpenWrt 23.05-SNAPSHOT r0-3601c2a49, kernel 5.4.213 Upgraded from the previous stable release on 2026-10-10 (settings kept) Router mod… --- ## [AltGr / German keyboard layout broken on Arch Linux – Comet Pro GL-RM10, firmware V1.10.1 release2](https://forum.gl-inet.com/t/altgr-german-keyboard-layout-broken-on-arch-linux-comet-pro-gl-rm10-firmware-v1-10-1-release2/72107)
**Author:** [@Mike.B](https://forum.gl-inet.com/u/Mike.B)\ **Replies:** 0\ **Last updated:** [October 16, 2026, 3:16pm UTC](https://forum.gl-inet.com/t/altgr-german-keyboard-layout-broken-on-arch-linux-comet-pro-gl-rm10-firmware-v1-10-1-release2/72107 "2026-10-16T15:16:49Z")
Hello GL.iNet team & Community, I’m using a Comet Pro GL-RM10 with firmware V1.10.1 release2, which the web interface reports as the latest version. My target device is an Arch Linux PC running KDE Plasma 6 on Wayland,… --- ## [Core Issue: MediaTek Hardware Acceleration Conflict under IPV6 with Router Flint 4 And SFP+ module](https://forum.gl-inet.com/t/core-issue-mediatek-hardware-acceleration-conflict-under-ipv6-with-router-flint-4-and-sfp-module/72083)
**Author:** [@Kaneda](https://forum.gl-inet.com/u/Kaneda)\ **Replies:** 2\ **Last updated:** [October 16, 2026, 1:43pm UTC](https://forum.gl-inet.com/t/core-issue-mediatek-hardware-acceleration-conflict-under-ipv6-with-router-flint-4-and-sfp-module/72083 "2026-10-16T13:43:53Z")
Hello everyone. I have recently identified an issue that causes the IPv6 connection to fail or stall within the hardware acceleration engine (PPE) of the MediaTek Filogic processor in the Flint 4 router—specifically whe… --- ## [Flint 4 feature request: less restrictive port range forwarding](https://forum.gl-inet.com/t/flint-4-feature-request-less-restrictive-port-range-forwarding/72061)
**Author:** [@Zero1](https://forum.gl-inet.com/u/Zero1)\ **Replies:** 2\ **Last updated:** [October 16, 2026, 1:29pm UTC](https://forum.gl-inet.com/t/flint-4-feature-request-less-restrictive-port-range-forwarding/72061 "2026-10-16T13:29:08Z")
Hi there I realise I’ll probably be told that this can be done in Luci or that I should just set DMZ, but I’d like to put forward a suggestion to make the port range forwarding in the Flint 4 UI less restrictive. The s… --- ## [\[Firmware Port\] Porting ImmortalWrt 25.12.1 to the GL.iNet GL-MG1300 (Mango 2) — Testers Welcome](https://forum.gl-inet.com/t/firmware-port-porting-immortalwrt-25-12-1-to-the-gl-inet-gl-mg1300-mango-2-testers-welcome/71990)
**Author:** [@XIAOZHAOXS](https://forum.gl-inet.com/u/XIAOZHAOXS)\ **Replies:** 3\ **Last updated:** [October 16, 2026, 1:24pm UTC](https://forum.gl-inet.com/t/firmware-port-porting-immortalwrt-25-12-1-to-the-gl-inet-gl-mg1300-mango-2-testers-welcome/71990 "2026-10-16T13:24:38Z")
Intro I got this GL-MG1300 through GL.iNet's official beta test program. It hasn't launched yet and there's very little public info on it, so I took the opportunity to go through the hardware thoroughly. Stock firmware i… --- ## [British Columbia Standard Time Zone](https://forum.gl-inet.com/t/british-columbia-standard-time-zone/72007)
**Author:** [@cliffgeo](https://forum.gl-inet.com/u/cliffgeo)\ **Replies:** 2\ **Last updated:** [October 16, 2026, 12:20pm UTC](https://forum.gl-inet.com/t/british-columbia-standard-time-zone/72007 "2026-10-16T12:20:55Z")
Hey Pacific Northwesters, If you live in the newly established British Columbia (Canada) Time Zone, you may be unable to have access to the admin panel on Chrome/Edge on your Windows device by typing in your IP Gateway.… --- ## [Flint 4/3 Mesh Question](https://forum.gl-inet.com/t/flint-4-3-mesh-question/72103)
**Author:** [@thebroughfamily](https://forum.gl-inet.com/u/thebroughfamily)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 11:37am UTC](https://forum.gl-inet.com/t/flint-4-3-mesh-question/72103 "2026-10-16T11:37:27Z")
Morning people, Currently got my Flint4 and Flint3 in a wired back haul mesh set up, wondering if I can lock a certain device to a specific node? My daughters PS5 keeps jumping wifi to the flint4 downstairs despite havi… --- ## [MUDI E750 - eSim app fails to launch](https://forum.gl-inet.com/t/mudi-e750-esim-app-fails-to-launch/72102)
**Author:** [@domzane](https://forum.gl-inet.com/u/domzane)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 10:41am UTC](https://forum.gl-inet.com/t/mudi-e750-esim-app-fails-to-launch/72102 "2026-10-16T10:41:05Z")
MUDI E750C06 (original V1 version) EP06-A with latest firmware V0208\_01.009.01.009 Firmware - latest beta eSim App is visible, installed, plenty of disk space available SIM is inserted and connecting successfully bu… --- ## [First impressions about 4.11 firmware on Flint2 (focused on mesh experience)](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864)
**Author:** [@AMirandola](https://forum.gl-inet.com/u/AMirandola)\ **Replies:** 7\ **Last updated:** [October 16, 2026, 10:27am UTC](https://forum.gl-inet.com/t/first-impressions-about-4-11-firmware-on-flint2-focused-on-mesh-experience/71864 "2026-10-16T10:27:40Z")
Here are some impressions after installing version 4.11.1 beta (directly from 4.9.1 without a reset—essentially the worst-case scenario) and adding a second Flint2 in a mesh configuration, bought specifically for the occ… --- ## [Network Drop on CometQ after firmware update](https://forum.gl-inet.com/t/network-drop-on-cometq-after-firmware-update/71464)
**Author:** [@osmoonlight](https://forum.gl-inet.com/u/osmoonlight)\ **Replies:** 26\ **Last updated:** [October 16, 2026, 9:38am UTC](https://forum.gl-inet.com/t/network-drop-on-cometq-after-firmware-update/71464 "2026-10-16T09:38:04Z")
After update to firmware 1.8.5 Release 1 the CometQ is loosing all WiFi connections after a few minutes. No networks can be found, only a reboot can re-establish the connection. IP is given from the router as reservatio… --- ## [New Android Goodpass app only supports dongle](https://forum.gl-inet.com/t/new-android-goodpass-app-only-supports-dongle/72090)
**Author:** [@pluginwizard](https://forum.gl-inet.com/u/pluginwizard)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 9:27am UTC](https://forum.gl-inet.com/t/new-android-goodpass-app-only-supports-dongle/72090 "2026-10-16T09:27:42Z")
i just downloaded the goodpas app and tried to connect with astrowarp on my Brume3 running 4.9 firmware. i got the letter code from the brume administration panel and tried to input it in the android app. it doesnt wor… --- ## [\[FeatureReq\] Network Activity Alert](https://forum.gl-inet.com/t/featurereq-network-activity-alert/72051)
**Author:** [@lama](https://forum.gl-inet.com/u/lama)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 9:21am UTC](https://forum.gl-inet.com/t/featurereq-network-activity-alert/72051 "2026-10-16T09:21:16Z")
on Clients page, all listed devices has/had some network activities. Whenever NAA (Network Activity Alert) is enabled for a device and it aggressively sends and recieves data (from Kb/s to Mb/s), admin can be alerted via… --- ## [\[4.9.0\] GL-BE9300: link-down on one LAN port disables br-lan's only wired port (eth1.1), disconnecting all wired clients](https://forum.gl-inet.com/t/4-9-0-gl-be9300-link-down-on-one-lan-port-disables-br-lans-only-wired-port-eth1-1-disconnecting-all-wired-clients/70346)
**Author:** [@firmware](https://forum.gl-inet.com/u/firmware)\ **Replies:** 4\ **Last updated:** [October 16, 2026, 9:15am UTC](https://forum.gl-inet.com/t/4-9-0-gl-be9300-link-down-on-one-lan-port-disables-br-lans-only-wired-port-eth1-1-disconnecting-all-wired-clients/70346 "2026-10-16T09:15:29Z")
hello! i’d like to preface this by saying i’m a software engineer, not a network engineer. i just want a homelab as the end result and don’t really want to learn about networking, so i’ve been relying heavily on ai to gu… --- ## [VPN Wont Release IP Flint 2 Router](https://forum.gl-inet.com/t/vpn-wont-release-ip-flint-2-router/72053)
**Author:** [@mgiannelis](https://forum.gl-inet.com/u/mgiannelis)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 9:07am UTC](https://forum.gl-inet.com/t/vpn-wont-release-ip-flint-2-router/72053 "2026-10-16T09:07:00Z")
My router is refusing to release the VPN IP after i disconnect. Server nodes on my network keep detecting the VPN IP cant see my native WAN assigned IP. I have run conntrack -F Ihave done a /etc/init.d/dnsmasq restart … --- ## [New Wifi SSID with VPN routing](https://forum.gl-inet.com/t/new-wifi-ssid-with-vpn-routing/72070)
**Author:** [@PegMan](https://forum.gl-inet.com/u/PegMan)\ **Replies:** 3\ **Last updated:** [October 16, 2026, 8:43am UTC](https://forum.gl-inet.com/t/new-wifi-ssid-with-vpn-routing/72070 "2026-10-16T08:43:20Z")
Hi, tried a few searches but nothing I could follow or related. I’m looking to add a new Wifi SSID for dedicated VPN routing. Any ideas? Flint 2 --- ## [Flint 4 4.11.0 beta release 3 6Ghz WiFi band latency](https://forum.gl-inet.com/t/flint-4-4-11-0-beta-release-3-6ghz-wifi-band-latency/72016)
**Author:** [@Pro4TLZZ](https://forum.gl-inet.com/u/Pro4TLZZ)\ **Replies:** 2\ **Last updated:** [October 16, 2026, 8:18am UTC](https://forum.gl-inet.com/t/flint-4-4-11-0-beta-release-3-6ghz-wifi-band-latency/72016 "2026-10-16T08:18:24Z")
Hi, when using the 6GHz WiFi band on the Flint 4 4.11.0 beta release 3 the latency seems to be much higher. For example when doing a simple Google search takes much more time to load the results with the 6GHz band than … --- ## [Ability to re-route first level domens through vpn](https://forum.gl-inet.com/t/ability-to-re-route-first-level-domens-through-vpn/72017)
**Author:** [@coziness-grove-old](https://forum.gl-inet.com/u/coziness-grove-old)\ **Replies:** 1\ **Last updated:** [October 16, 2026, 7:38am UTC](https://forum.gl-inet.com/t/ability-to-re-route-first-level-domens-through-vpn/72017 "2026-10-16T07:38:24Z")
Sometimes I rerouting specific traffic using first level domain (ru, rs, pl and others). In 4.8.3 everything works great, but after upgrade same configuration works, but it’s impossible to set it through web UI. Could yo… --- ## [Flint 2 (GL-MT6000) WireGuard Client: startup-connecting-timeout loop on all PIA servers except Singapore](https://forum.gl-inet.com/t/flint-2-gl-mt6000-wireguard-client-startup-connecting-timeout-loop-on-all-pia-servers-except-singapore/72005)
**Author:** [@Tseb](https://forum.gl-inet.com/u/Tseb)\ **Replies:** 4\ **Last updated:** [October 16, 2026, 6:40am UTC](https://forum.gl-inet.com/t/flint-2-gl-mt6000-wireguard-client-startup-connecting-timeout-loop-on-all-pia-servers-except-singapore/72005 "2026-10-16T06:40:46Z")
Hi everyone, I am having a frustrating issue with Private Internet Access (PIA) WireGuard on my \*\*GL-MT6000 (Flint 2)\*\*running firmware v4.11.0. My internet connection is completely fine, and my phone connects to all P… [Previous page](https://forum.gl-inet.com/latest.md) [Next page](https://forum.gl-inet.com/latest.md?page=2)