4.2.1 on AX1800: wrong labels for switch

hadmut · 2023-05-16T17:16:20.251Z

Hi,
when using the luci web interface to add VLANs to the switch ports, the interfaces have wrong labels, and an error message

Switch switch0 has an unknown topology - the VLAN settings might not be accurate.

is shown. E.g. a cable plugged into LAN4 port appears as CPU(eth0)

hadmut · 2023-05-16T17:20:21.837Z

Instead of

Port1 Port2 Port3 Port4 Port5 CPU

it should probably be

CPU WAN LAN1 LAN2 LAN3 LAN4

robotluo · 2023-05-17T11:21:38.800Z

What firmware version do you using?
Perhaps because the AX1800 does not use the standard DSA framework switch driver, its status on luci does not show correctly.

hadmut · 2023-05-17T12:38:17.997Z

4.2.1 downloaded and installed manually, since the 4.1.? I had before did not offer automatic update.