A1300 - wireguard issue

lenovomi · 2022-12-06T11:17:52.811Z

and now its constantly failing with the error from my 1. post.

jdub · 2022-12-06T11:25:38.489Z

Pretty sure connection messages look different than that. I’d say it never connected.

You can always use wg show to start debugging.

Some providers have other instructions, but as someone who self hosts I don’t know what those might be.

lenovomi · 2022-12-06T11:28:12.632Z

i set up my wireguard server on other openwrt router and all clietns can connect to it.

only a1300 cant . seems that device is like for kids … not for normal use…

jdub · 2022-12-06T11:33:27.850Z

The only times I’ve had a problem connecting to a real Linux WireGuard server were errors when I messed something up in the config file. Wrong port, wrong ip, not putting a /32 on the end of the address, etc.

Post your config with the keys redacted.

lenovomi · 2022-12-06T11:37:05.445Z

config is copypaster from working client.

lenovomi · 2022-12-06T11:45:23.009Z

[Interface]
Address = 192.168.9.4/32
ListenPort = 30464
PrivateKey = xxx
DNS = 10.0.1.1

[Peer]
AllowedIPs = 0.0.0.0/0
Endpoint = xxx.dynu.com:51820
PersistentKeepalive = 25
PublicKey = xxxx
PresharedKey = xxx

jdub · 2022-12-06T11:52:00.994Z

Are you trying to connect from the LAN side of that other router?

jdub · 2022-12-06T11:52:57.980Z

Also the guest wifi for glinet products is in the 192.168.9.0/24 range. You’ll probably need to change that. You’re probably getting tangled up in those firewall rules.

lenovomi · 2022-12-06T11:55:08.535Z

jdub:

wg show

this is not for debugging …

jdub · 2022-12-06T11:57:55.300Z

this is not for debugging …

Ok, you seem to be more than capable to do this on your own then. Best of luck.

(Though you might at least consider my post above about the overlapping ip range, which is almost certainly your problem)

lenovomi · 2022-12-06T12:03:14.331Z

jdub:

Ok, you seem to be more than capable to do this on your own then. Best of luck.

lol kiddo
no i am not saying i am more then capable but this is nothing to do with debugging

jdub:

(Though you might at least consider my post above about the overlapping ip range, which is almost certainly your problem)

and again NO

lenovomi

1m

jdub:

Also the guest wifi for glinet products is in the 192.168.9.0/24 range. You’ll probably need to change that. You’re probably getting tangled up in those firewall rules.

i changed wireguard server ip to 192.168.55.1/
and clients to 192.168.55.3

and it doesnt work so no its not the issue.

lenovomi · 2022-12-06T12:11:20.421Z

there is something other BROKEN

/usr/bin:/sbin:/bin PWD=/
Tue Dec 6 13:09:51 2022 daemon.notice netifd: wgclient (7757): udhcpc: started, v1.33.2
Tue Dec 6 13:09:51 2022 daemon.notice netifd: wgclient (7757): udhcpc: sending discover
Tue Dec 6 13:09:53 2022 daemon.notice netifd: wgclient (7757): udhcpc: no lease, failing
Tue Dec 6 13:09:54 2022 daemon.notice netifd: wgclient (7757): udhcpc: started, v1.33.2
Tue Dec 6 13:09:54 2022 daemon.notice netifd: wgclient (7757): udhcpc: sending discover

jdub · 2022-12-06T12:15:54.173Z

The DNS/dhcp client? It’s a the same compiled binary man, same across all OpenWRT devices. It’s not a bug.

Send it back, you’re clearly not going to be happy.

lenovomi · 2022-12-06T12:23:37.237Z

jdub:

The DNS/dhcp client? It’s a the same compiled binary man, same across all OpenWRT devices. It’s not a bug.

the ip address for wireguard client is set fixed;
there is nothing to do with dhcp.

lenovomi · 2022-12-06T12:23:52.370Z

jdub:

Send it back, you’re clearly not going to be happy.

with kiddish crap tool noone will be happy.

lenovomi · 2022-12-06T12:29:36.926Z

this it the proof it got connected and crashed/messed/disonnected bc of the error i provided

image1230×316 12.2 KB

jdub · 2022-12-06T12:30:09.060Z

Unlike the hot mess that is the 6000 series, the 4000 series is actually quite stable. If you think there’s a problem with the GLI front end, like I said, put a stock version of Open WRT on it.

But everybody’s pulling from the same wire guard code. I can assure you that GLI is not doing anything different. The problem is in the configuration, not the code.

Like I said, you obviously know more than the rest of us here, and you’re not going to be happy with the device. Send it back. I’m not particularly interested in helping you debug this problem further. Someone else may be.

lenovomi · 2022-12-06T12:31:32.828Z

jdub:

Like I said, you obviously know more than the rest of us here

yes these kiddish rivers.

I provided CONFIG
I provided log
I provided screenshot

you provided nothing. just empty words.

jdub · 2022-12-06T12:38:04.526Z

I spotted one obvious issue with your config file, and would have been happy to continue helping you go through the others, but then things turned bad faith in a hurry. At this point even if I helped you solve the problem, you still wouldn’t be happy, so it’s not worth either of us continuing.

Have a nice day

lenovomi · 2022-12-06T12:42:29.202Z

what are you talking about ? IP WAS changed and same issue is there constantly.

not saying tat conf comes with ADDRESS
which is removed in dump
root@GL-A1300:~# wg showconf wgclient
[Interface]
ListenPort = 30464
PrivateKey = xxxxNUB/FHTcc9cTKKPxt5Wo=

@jdub please stop continue with that mess . and these messages who will be happy.