Adding Wi-Fi to MV1000 Brume

lizh · 2020-05-25T10:31:27.343Z

Sorry, DWA-171 have not supported by default.

Slate · 2020-05-28T03:17:20.289Z

lizh:

AWUS036ACS

Hi @lizh @alzhao
Just bought an Alfa AWUS036ACS, plugged into Brume. Rebooted.
However, the Wireless Client menu does not appear. Running the Adguard firmware version.

How to proceed?

Slate · 2020-05-28T07:20:19.274Z

It’s ok.

Use openwrt-mv1000-emmc-3.103-0527, and it works!
Superb!!

Almahadeus · 2020-07-24T21:55:24.046Z

Great work and confirm both Alfa dongles are working with no issues at all. Will this embeded WiFi support be an ongoing part of future firmwares or is it only experimental for certain firmware versions?

alzhao · 2020-07-25T05:48:59.540Z

WiFi support will be in the default firmware from now. The router can identify if it is internal WiFi or external WiFi dongle. But as the WiFi driver is installed, WiFi support will always be true.

Almahadeus · 2020-07-25T10:10:50.522Z

That is great to know. Thanks again for your excellent work.

zupitess · 2020-07-29T17:55:51.567Z

Hi there …is working perfect with RTL8811AU dongle …
Very thank you for the moderators

Capture1323×687 33.1 KB

Almahadeus · 2020-07-29T22:05:20.963Z

Which dongle make are you actually using?

Bob · 2020-10-22T14:29:24.698Z

JCool:

Alfa AWUS036ACS

The middle LED on Brume was programmed for VPN activity, however after adding the dongle this LED is out. Is there a new setting to have the LED show VPN activity with the Alfa dongle and if not will future firmware support it?

alzhao · 2020-10-22T14:44:05.489Z

You can check settings in /etc/config/system
About LED config.

It should be vpn interface for middle led.

Bob · 2020-10-22T16:19:23.446Z

image1536×2048 211 KB

Here is the LED configuration for the middle LED VPN activity, what parameter do I use once the Alfa dongle is installed for VPN activity? Disregard the second VPN setting in the screenshot, I was attempting to experiment with no success. Thanks for the education

alzhao · 2020-10-23T15:40:37.311Z

You cannot configure one led for multiple purpose.

Pls delete duplicated settings and try again. The 2nd settings seems correct.

zupitess · 2020-11-18T15:58:15.060Z

zupitess:

with RTL8811AU dongle

with RTL8811AU dongle

Almahadeus · 2020-11-18T21:42:55.641Z

Thanks, I realise this is the chip type but are you using it from a specific manufacturer? I am asking as not all dongles are created equal!

mccob · 2021-07-02T22:05:44.133Z

hello,

is it possible to add support for : TP-LINK Archer T2U Nano - TechInfoDepot ( Realtek RTL8811AU) ?

according to this page, seems to be : USB\VID_0BDA&PID_A811

lsusb
Bus 001 Device 002: ID 2357:011e TP-Link

thank you

la3y · 2021-07-26T05:30:02.476Z

Realtek is crap, don’t use Realtek and Broadcom ever. Use only devices with good support open source community

beniamin · 2021-08-30T02:26:07.424Z

@alzhao

Can you add this ID please. It’s for the TP link T2U nano.
I purchased this thinking it would work. Wifi does not appear. I just need to create an AP and would love something small.
2357:011e TP-Link

alzhao · 2021-08-30T02:41:18.209Z

beniamin:

2357:011e TP-Link

I notified developers to add these so that you can use in next firmware

beniamin · 2021-08-31T14:35:48.732Z

@alzhao
Thank you friend. Is there any way we can ssh into the router and add the ID ourselves?

alzhao · 2021-09-01T08:23:30.008Z

beniamin:

Thank you friend. Is there any way we can ssh into the router and add the ID ourselves?

I think you should compile the wifi driver. Actually it is open source. openwrt/package/kernel/rtl8192eu at openwrt-19.07.7 · gl-inet/openwrt · GitHub

If you can just compile and put the driver in the system it may be quicker