# Additional SSID not working + OpenWrt revert question (GL-BE9300)

**URL:** <https://forum.gl-inet.com/t/additional-ssid-not-working-openwrt-revert-question-gl-be9300/67934>\
**Category:** Router\
**Created:** [April 2, 2026, 6:39am UTC](https://forum.gl-inet.com/t/additional-ssid-not-working-openwrt-revert-question-gl-be9300/67934 "2026-04-02T06:39:26Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![will.qiu](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/w/b38774/32.png) [@will.qiu](https://forum.gl-inet.com/u/will.qiu)\
**Post date:** [April 3, 2026, 8:36am UTC](https://forum.gl-inet.com/t/additional-ssid-not-working-openwrt-revert-question-gl-be9300/67934/5 "2026-04-03T08:36:08Z")

</div>

Did you enable the DHCP server on the corresponding IoT interface as described in step 4 of the guide?

> [@How to set up the VLAN for IoT Wi-Fi on Flint 3(GL-BE9300)](https://forum.gl-inet.com/t/how-to-set-up-the-vlan-for-iot-wi-fi-on-flint-3-gl-be9300/63364/1):
>
> **4. Enable DHCP for IoT Network**  
> We configure a DHCP server to assign IP addresses to IoT devices.
> 
> ```auto
> uci set dhcp.iot=dhcp
> uci set dhcp.iot.interface='iot'
> uci set dhcp.iot.start='100'
> uci set dhcp.iot.limit='150'
> uci set dhcp.iot.leasetime='12h'
> 
> ```

We’ve tested this locally, and by simply following the tutorial steps, a new SSID can be created successfully, with other devices able to connect and function normally—no additional steps are required.

If possible, please follow the guide and share your device with us via GoodCloud so we can check it remotely?

> **[Technical Support via GoodCloud - GL.iNet Router Docs 4](https://docs.gl-inet.com/router/en/4/tutorials/technical_support_via_goodcloud/)**
>
> Documentation for GL.iNet Router Productions

Kindly note to send us the MAC address and the router password via private message so we can access it

 ![image](https://forum-static.gl-inet.com/original/3X/1/0/10705d4a12191adc9fba880b69bfea7853d44efe.png)

---

_[View the full topic](https://forum.gl-inet.com/t/additional-ssid-not-working-openwrt-revert-question-gl-be9300/67934)._
