# AdGuard Home On Firmware v4.7.4 **URL:** \ **Category:** Router\ **Created:** [April 19, 2025, 2:52pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398 "2025-04-19T14:52:08Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 19, 2025, 2:52pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/1 "2025-04-19T14:52:08Z")
Has anyone noticed that AdGuard Home doesn’t upgrade on Firmware 4.7.0 on the GL-AXT1800 Slate AX Running firmware 4.7.4 on the Flint 2 no problem, I did get it running on the GL-AXT1800 Slate AX the next day AdGuard Home shows a blank home page but still blocking ads, never had this issue on the last firmware, I either go back to the previous firmware or stick with the stock version of AdGuard and try again, on the next firmware. ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 19, 2025, 3:39pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/2 "2025-04-19T15:39:57Z")
Just flashed back to 4.6.1.1 firmware and AdGuard updates and works fine so there is an issue with 4.7.0 on the GL-AXT1800 Slate AX. ![Capture](https://forum-static.gl-inet.com/original/3X/0/5/05b216ed8bf3189e85f33dd76196092c61fdf510.jpeg) ---
**Author:** ![mainufer](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/mainufer/32/5948_2.png) [@mainufer](https://forum.gl-inet.com/u/mainufer)\ **Post date:** [April 20, 2025, 6:17pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/3 "2025-04-20T18:17:29Z")
What kind of error did you experience, if I may ask? ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 20, 2025, 10:53pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/4 "2025-04-20T22:53:11Z")
Hi it would not update, and when I managed to get it work after a few hours the AdGuard page went blank going back to the previous firmware everything worked fine. ---
**Author:** ![mainufer](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/mainufer/32/5948_2.png) [@mainufer](https://forum.gl-inet.com/u/mainufer)\ **Post date:** [April 21, 2025, 6:12am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/5 "2025-04-21T06:12:57Z")
When you say ‘update’, are you referring to the blocklists or the application itself? ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 21, 2025, 9:19am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/6 "2025-04-21T09:19:52Z")
Sorry the app itself, staying with the stock version seems ok not really run it, if manual update the program manually it goes blank, and if you update it using the update button in AdGuard home it freezes, it’s not due to lack of room either, the earlier firmware perfect. ---
**Author:** ![mainufer](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/mainufer/32/5948_2.png) [@mainufer](https://forum.gl-inet.com/u/mainufer)\ **Post date:** [April 21, 2025, 9:32am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/7 "2025-04-21T09:32:23Z")
Have you tried updating via the AdGuardHome --update command ? ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 21, 2025, 10:12am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/8 "2025-04-21T10:12:07Z")
Only the standard way to update it when AdGuard home informs you that there is a new version available, I have removed the don’t update line or that option isn’t available. Hope that’s clear ---
**Author:** ![mainufer](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/mainufer/32/5948_2.png) [@mainufer](https://forum.gl-inet.com/u/mainufer)\ **Post date:** [April 21, 2025, 11:23am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/9 "2025-04-21T11:23:23Z")
I would try to log into the router via putty, and then update AdguardHome via the command line. This should actually work. ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 21, 2025, 12:35pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/10 "2025-04-21T12:35:46Z")
I’m not very good with SSH unfortunately I use WinSCP got it working and like said before after a short time it froze the AdGuard home page. ---
**Author:** ![admon](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/admon/32/32880_2.png) [@admon](https://forum.gl-inet.com/u/admon)\ **Post date:** [April 21, 2025, 1:15pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/11 "2025-04-21T13:15:09Z")
Try > [@\[Script\] Update AdGuard Home](https://forum.gl-inet.com/t/script-update-adguard-home/39398): > > Hi there wave some people wonder how to update the AdGuard Home version on devices like the Flint or Flint2. For your convenience, I created a script to automate this process. Make sure to read and understand this post before you go on! Permanent feature I added the option to make all changes permanent. The script therefore only needs to be executed once, the effects are then permanent. Even across firmware updates. On the downside, it might create trouble when you flash a way older firmware… ---
**Author:** ![mainufer](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/mainufer/32/5948_2.png) [@mainufer](https://forum.gl-inet.com/u/mainufer)\ **Post date:** [April 21, 2025, 7:35pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/12 "2025-04-21T19:35:32Z")
Which version of AdGuardHome do you use on your GL-AXT1800 when updating via WinSCP? Do you make sure to set the correct access rights? And do you stop AdGuardHome in the GUI before copying the new version over? ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 21, 2025, 9:13pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/13 "2025-04-21T21:13:14Z")
yes i do stop it running and it works flawlessly on 4.6.11 and earlier firmwares ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 21, 2025, 10:23pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/14 "2025-04-21T22:23:59Z")
Sorry did answer your question on my Slate AX AdGuard with the old firmware go the latest AdGuard v0.107.60 an on my Flint 2 i just tried my Flint 1 with Firmware 4.7.0 and that is the same as the Slate AX will not update. ---
**Author:** ![slesar](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/slesar/32/13581_2.png) [@slesar](https://forum.gl-inet.com/u/slesar)\ **Post date:** [April 22, 2025, 5:21am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/15 "2025-04-22T05:21:32Z")
Overall problem is Adguard home config.yaml which not match version Adguard home after upgrade firmware. You could do what @admon made script. Or cut file config.yaml and open page looks like installation Adguard home. Fill random, upgrade Adguard home. Turn off Adguard home, delete generated new file config.yaml and paste your config.yaml. should be work if you did upgraded Adguard home before. ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [April 22, 2025, 6:14am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/16 "2025-04-22T06:14:53Z")
Yes I have had that issue in the distant past but Flint 2 works fine without keeping the original config file, I did try that as a matter of corse anyway makes no difference but thanks for pointing it out. Something drastic has been changed in Firmware 4.7.0, as previous firmwares on both routers work without issues. ---
**Author:** ![slesar](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/slesar/32/13581_2.png) [@slesar](https://forum.gl-inet.com/u/slesar)\ **Post date:** [April 22, 2025, 7:24am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/17 "2025-04-22T07:24:33Z")
Do you know flint 2 did not all files to change after firmware. Only specific folders changed during upgrade firmware. ---
**Author:** ![admon](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/admon/32/32880_2.png) [@admon](https://forum.gl-inet.com/u/admon)\ **Post date:** [April 22, 2025, 8:08am UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/18 "2025-04-22T08:08:12Z")
That's not correct. All files will be replaced, only the one in `/etc/config` and all mentioned files in `/etc/sysupgrade.conf` won't be touched. ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [May 24, 2025, 9:22pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/19 "2025-05-24T21:22:25Z")
I noticed Firmware 4.7.0 has been removed hope it's to fix AdGuard Home upgrade issue or the problem is not passed onto Firmware 4.8, still running 4.6.1.1 ---
**Author:** ![Radiocrazy](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@Radiocrazy](https://forum.gl-inet.com/u/Radiocrazy)\ **Post date:** [July 2, 2025, 9:53pm UTC](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398/20 "2025-07-02T21:53:51Z")
Just tried the latest beta firmware 4.8.0 on the AXT1800 Slate AX, and still has an AdGuard update is still not working so back to 4.6.1.1 [Next page](https://forum.gl-inet.com/t/adguard-home-on-firmware-v4-7-4/57398.md?page=2)