# Adguard problems on GL-AX1800

**URL:** <https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102>\
**Category:** Router\
**Created:** [February 6, 2023, 6:28am UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102 "2023-02-06T06:28:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![angryfatcat](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/ac91a4/32.png) [@angryfatcat](https://forum.gl-inet.com/u/angryfatcat)\
**Post date:** [February 6, 2023, 6:28am UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/1 "2023-02-06T06:28:58Z")

</div>

I have a relatively new Flint and it looks like it cannot correctly run the adguard instance that was preinstalled on the router.

The two major issues I’ve found so far are:

1. Adguard onlly sees one client (localhost). I believe the cause of this issue is a port issue 53 versus 3053. There are several threads about this issue, but no official (fix). It looks like a port forward from 53 to 3053 is the easiest way to fix this. What is the correct way to fix this?

1. The “Enable encryption” option in Adguard does not work and throws an error when attempted (Error: control/tls/validate | port 443 is not available, cannot enable HTTPS on it ). Obviously this is in conflict with another preconfigured setting on the router.

What is the correct way to fix these issues and get adguard working as expected.

Router details:  
Adguard version: v0.107.8  
Openwrt Version: OpenWrt 21.02-SNAPSHOT r16399+157-c67509efd7  
Kernel Version: 4.4.60

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [February 6, 2023, 7:11am UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/2 "2023-02-06T07:11:07Z")

</div>

Please refer to

> [@GL-AXT1800 VPN Policy-based do not work with adguard](https://forum.gl-inet.com/t/gl-axt1800-vpn-policy-based-do-not-work-with-adguard/26283):
>
> If you configure policies and enable adguard, then after rebooting the router, the policy stops working. If you disable adguard, vpn domain name policies work again. This seems to be due to an added forward rule on port 3053

> [@Is the Admin Panel in the browser actually safe from local spoofers and is AdGuard encryption possible?](https://forum.gl-inet.com/t/is-the-admin-panel-in-the-browser-actually-safe-from-local-spoofers-and-is-adguard-encryption-possible/26119):
>
> Greetings! I was wondering that how safe the web access panel is really from local spoofers. By default the router uses HTTP, so traffic is not encrypted. This means that a malicious actor could in theory analyze network traffic when using the same wireless network. I make sure to either connect to the router directly via cable when managing it, or use the onboard VPN server option when connecting wirelessly. I have the following questions: Using the before mentioned: is it safe to assume…

---

<div class="post-metadata">

**Author:** ![K3rn3l\_Ku5h](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/k3rn3l_ku5h/32/5634_2.png) [@K3rn3l\_Ku5h](https://forum.gl-inet.com/u/K3rn3l_Ku5h)\
**Post date:** [February 6, 2023, 2:14pm UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/3 "2023-02-06T14:14:33Z")

</div>

The 4.2.x snapshot I am using has a switch feature to enable this. Seemed to work but will break DNSmasque

---

<div class="post-metadata">

**Author:** ![angryfatcat](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/ac91a4/32.png) [@angryfatcat](https://forum.gl-inet.com/u/angryfatcat)\
**Post date:** [February 6, 2023, 8:01pm UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/4 "2023-02-06T20:01:04Z")

</div>

With regard to adguard only seeing localhost as a client, there are issues with the “solution” referenced above.

First of all, the solution is only available in the app, not when accessing the routers web UI. The second issue is that the solution doesnt work. In the app, when I toggle “Adguard handle client requests” to on, and click submit, the app returns “success”. However if I back out of adguard on the app and return, “Adguard handle client requests” is no longer on. I am using the ios beta version of the app 2.0.0…

Why is this setting only available in the app, and not in the web UI? Is this just broken in the beta? Is there another way to activate this feature?

(I also tried this on my Beryl AX GL-MT3000 and the same issue happens. Toggling on handle client requests does not persist once you navigate away from settings.)

---

<div class="post-metadata">

**Author:** ![yuxin.zou](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/yuxin.zou/32/11475_2.png) [@yuxin.zou](https://forum.gl-inet.com/u/yuxin.zou)\
**Post date:** [February 7, 2023, 1:12am UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/5 "2023-02-07T01:12:29Z")

</div>

This option is only available on the 4.2 firmware, please upgrade your firmware.  
[GL.iNet download center](https://dl.gl-inet.com/?model=ax1800&type=beta)

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:20am UTC](https://forum.gl-inet.com/t/adguard-problems-on-gl-ax1800/27102/6 "2025-10-29T04:20:40Z")

</div>


