All clients showing as localhost in AdGuard Home

gcwgill · 2024-08-06T04:33:40.222Z

All clients are showing as localhost in AdGuard Home. I've had this issue before, but I can't remember what I did to fix it last time. Any ideas why this might be occurring again?

admon · 2024-08-06T07:40:15.211Z

Enable „AdGuard Home handles Clients“

gcwgill · 2024-08-06T13:55:06.995Z

Hi admon,

Thank you for your response. It appears that the toggle is already on.

Any other ideas?

clannad · 2024-08-06T15:11:09.187Z

AdGuard Home Handle Client Request - Breakdown

Refer to this post:
This issue is known, it affects the ADG Client list and ADG Query log.
And it already in the develop plan to improve the DNS processes processing flow about the ADG/VPN/Dnsmasq. Thanks.

Try to disable the VPN feature and test it in AdGuard Home again.

True0Man · 2024-08-06T19:00:57.659Z

Same situation here.

ADH toggle is on (even on/off/on doesn't change anything)
no VPN
no PARENTAL CONTRO

and only "localhost" on the list...

gcwgill · 2024-08-06T21:43:08.833Z

Ah, this is likely the cause. My VPN client is always running, as well as my server. I will just leave those running for now. Thank you!

bruce · 2024-08-07T07:20:51.339Z

If enable the 'AdGuard Home Handle Client Requests' option?

Renato · 2024-08-07T08:44:37.254Z

I have this option enabled and I only can see "localhost" on the list since the beggining.
I recently noticed this because on GL-B3000 the list is by IP

MT6000:
No VPN, no Parental Control. It's running only Adguard Home. I can see only "loalhost" on the list.

B3000:
VPN is on, no Parental Control, also Adguard Home is running. I can see the IP list.

bruce · 2024-08-08T02:00:30.008Z

Please let me know your MT6000 firmware version and ADG version.
I have not reproduced this situation in FW v4.6.2, ADG v0.107.46.

No VPN/Parental Control, Only ADG without 'AdGuard Home Handle Client Requests'

image750×286 14.4 KB

No VPN/Parental Control, Only ADG with 'AdGuard Home Handle Client Requests'

image693×291 9.82 KB

Renato · 2024-08-08T08:37:24.519Z

To be honest, since I'm using MT6000, I never saw the list of IPs.
It's always "localhost", no matter the version of the firmware and AGH.

Current Flint2 firmware: 4.6.2
Current AGH version: 0.107.52 (update from here)

image1183×437 63.7 KB

image1113×421 25.8 KB

image1018×531 38 KB

image892×439 11.5 KB

bruce · 2024-08-08T09:27:09.079Z

image1300×684 47.3 KB

image1300×443 26.2 KB

image1067×362 43.4 KB

Could you please convenience to reset the firmware to see if this situation still there?
My configuration is same to yours, but it can not reproduce.

briar-spoon-celibate · 2024-08-09T19:49:25.417Z

I've the same issue, happened after upgrading to v4.6.2.


Model	GL Technologies, Inc. AX1800
Architecture	ARMv7 Processor rev 4 (v7l)
OpenWrt Version	OpenWrt 21.02-SNAPSHOT r16399+171-c67509efd7
Kernel Version	4.4.60

/etc/config/dhcp

config dnsmasq
        option domainneeded '1'
        option localise_queries '1'
        option rebind_localhost '1'
        option local '/lan/'
        option domain 'lan'
        option expandhosts '1'
        option authoritative '1'
        option readethers '1'
        option leasefile '/tmp/dhcp.leases'
        option ednspacket_max '1232'
        option localuse '0'
        option port '0'
        option logqueries '1'
        option localservice '0'
        option rebind_protection '1'
        option noresolv '1'
        list server '127.0.0.1#3053'

config dhcp 'lan'
        option interface 'lan'
        option start '100'
        option limit '150'
        option leasetime '12h'
        option dhcpv4 'server'
        list dhcp_option '6,192.168.8.1'
        option dhcpv6 'disabled'
        option ra 'disabled'
        option force '1'

config dhcp 'wan'
        option interface 'wan'
        option ignore '1'
        list ra_flags 'none'

Screenshot 2024-08-09 at 15.48.26

briar-spoon-celibate · 2024-08-11T16:25:33.412Z

Another issue:
When I set some client to not use VPN, it can no longer perform nslookup...

I'm rapidly losing faith in GL-iNet's QA process... Every single update breaks some feature... I've delayed my update until now... and I got burnt once again when I push the update button.

admon · 2024-08-11T16:54:55.104Z

briar-spoon-celibate:

When I set some client to not use VPN, it can no longer perform nslookup

This does not make sense tbh.

How do you run nslookup? Against local router or other servers?

briar-spoon-celibate · 2024-08-11T17:14:42.903Z

Hi @admon

What I'm trying to do is to

By Pass VPN by MAC Address
On the machine that have VPN bypassed, I ran the following and all failed

nslookup google.com
nslookup google.com 192.168.8.1
nslookup google.com 1.1.1.1
nslookup google.com 9.9.9.9

My config: All clients showing as localhost in AdGuard Home - #12 by briar-spoon-celibate

slesar · 2024-08-11T17:50:16.660Z

Did you running dhcp in adguard home or gl router?
Show me your client list in adguard home > settings > client setting

Screenshot_2024-08-11-18-49-14-309_com.brave.browser1080×2400 173 KB

I double check my dns setting in router was disable because I am running adguard home

Screenshot_2024-08-11-18-55-24-617_com.brave.browser-edit1080×1415 125 KB

briar-spoon-celibate · 2024-08-12T00:47:53.305Z

Screenshot 2024-08-11 at 20.46.331112×608 73.2 KB

@slesar I'm running DHCP on GL Router.

The clients you see here (Source ARP) are from BEFORE the upgrade. They're no longer appearing on AdGuard Home. They now only show up as 127.0.0.1

If I uncheck everything under #/dnsview, all DNS requests bypasses AdGuard Home.

slesar · 2024-08-12T05:03:27.989Z

Can you show me firewall in luci (network > firewall > port forward), thanks.

briar-spoon-celibate · 2024-08-12T09:57:05.797Z

SmartSelect_20240812_055623_Mull952×1215 155 KB

@slesar

slesar · 2024-08-12T10:48:03.766Z

Try uncheck 2 vpn dns and remove 2 unnames.
Looks like conflict dns port listens...

Screenshot_2024-08-12-11-46-30-383_com.brave.browser-edit1080×2400 237 KB