# Any beta firmware available for the Marble? **URL:** \ **Category:** Router\ **Created:** [December 10, 2024, 7:32pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704 "2024-12-10T19:32:16Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [December 10, 2024, 7:32pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/1 "2024-12-10T19:32:16Z")
I see the Spitz Plus already has a beta firmware available [GL.iNet download center](https://dl.gl-inet.com/router/x2000/beta) Will the Marble get a new version soon as it's been left on 4.5.19 since August and it's the same chipset as the X2000 and I'm sure the following Improvements and Big Fixes would be appreciated by all Marble owners: **Improvement** Optimize web interface. **Bug Fixes** Fixed an issue where enabling AdGuard Home would reset custom DNS encryption settings during configuration upgrades. Fixed an IPv6 connectivity issue where PCs on the LAN side could not ping devices when in IPv6 Passthrough mode. Fixed an issue where wireless switching would cause the repeater to disconnect when the repeater was enabled. ---
**Author:** ![rain](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/e95f7d/32.png) [@rain](https://forum.gl-inet.com/u/rain)\ **Post date:** [December 11, 2024, 10:02am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/2 "2024-12-11T10:02:04Z")
Sure, we are working on this. The new firmware for Marble shall be v4.7.2 and the beta firmware is supposed to be available in a week, if everything goes well. ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [December 11, 2024, 10:32am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/4 "2024-12-11T10:32:09Z")
Thanks for the info!! I will install it and I will report anything bug (if there are present) 🙂 ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [December 17, 2024, 4:56pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/6 "2024-12-17T16:56:06Z")
I shall check back tomorrow then 🙂 ---
**Author:** ![rain](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/e95f7d/32.png) [@rain](https://forum.gl-inet.com/u/rain)\ **Post date:** [December 26, 2024, 7:55am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/7 "2024-12-26T07:55:46Z")
Sorry but some days delayed. The beta firmware is available now. Check it in this link: [GL.iNet download center](https://dl.gl-inet.com/router/b3000/beta) ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [December 26, 2024, 1:50pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/8 "2024-12-26T13:50:45Z")
Thanks!! Installed without issue. I will tell something if I see any issue. ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [December 26, 2024, 10:39pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/9 "2024-12-26T22:39:57Z")
Upgrade was weird, first local upgrade said not official firmware. Also managed to out of memory the Marble. Rebooted and installed fine. ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [December 27, 2024, 3:31pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/10 "2024-12-27T15:31:14Z")
I installed this firmware via Uboot and I did not experiment issues with this method. ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [December 27, 2024, 8:20pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/11 "2024-12-27T20:20:51Z")
How's your throughput, I have lost 27Mb on the download. > **[Speedtest by Ookla - The Global Broadband Speed Test](https://www.speedtest.net/result/c/8183fe07-d697-4b17-9b3f-9b4d2894e218)** > > Use Speedtest on all your devices with our free desktop and mobile apps. ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [December 27, 2024, 10:42pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/12 "2024-12-27T22:42:18Z")
On my internet connection (1 Gbps theorical) always it has danced the speed between 750-900 Mbps. In 4.5.19 it was, in average, 850 Mbps, but in 4.7.2 it has been nerfed the speed too. I attach my Speedtest results here. Tests have been done with an Intel AX210 wifi card connected on the WiFi 6 network in the best channel I have been able to tune: ![IMG_0349](https://forum-static.gl-inet.com/original/3X/c/a/cac70a32dc4224029e4eb011962c52dc822597d8.jpeg) ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [December 27, 2024, 11:26pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/13 "2024-12-27T23:26:23Z")
Can you run this from the terminal > [@Feature Request Speed Test](https://forum.gl-inet.com/t/feature-request-speed-test/51001/5): > > You can try this: wget https://install.speedtest.net/app/cli/ookla-speedtest-1.2.0-linux-aarch64.tgz && tar xzf ookla-speedtest-1.2.0-linux-aarch64.tgz && ./speedtest ---
**Author:** ![mitch](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/dec6dc/32.png) [@mitch](https://forum.gl-inet.com/u/mitch)\ **Post date:** [December 28, 2024, 8:37am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/14 "2024-12-28T08:37:48Z")
I'm getting identical wired ethernet speed from WAN with 4.7.2 beta firmware vs 4.5.19 ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [December 28, 2024, 9:02am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/15 "2024-12-28T09:02:02Z")
Yes, It works on my side. WiFi speed results are a bit better than Speedtest. ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [January 10, 2025, 9:45am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/16 "2025-01-10T09:45:26Z")
goodcloud incorrectly reports SSID visibility as hidden on 4.7.2 firmware on the Marble and Opal ---
**Author:** ![rain](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/r/e95f7d/32.png) [@rain](https://forum.gl-inet.com/u/rain)\ **Post date:** [January 13, 2025, 7:42am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/17 "2025-01-13T07:42:57Z")
Verified this issue, we shall fix it soon. Sorry anyway for this trouble. ---
**Author:** ![impreza233](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/impreza233/32/21879_2.png) [@impreza233](https://forum.gl-inet.com/u/impreza233)\ **Post date:** [January 16, 2025, 10:53am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/18 "2025-01-16T10:53:07Z")
I don't use Goodcloud, so I could not reproduce the issue on 4.7.2. Thanks for the fix. ---
**Author:** ![mbooma](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/e19adc/32.png) [@mbooma](https://forum.gl-inet.com/u/mbooma)\ **Post date:** [March 29, 2025, 11:46pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/19 "2025-03-29T23:46:39Z")
HI Any news about an openwrt 24.10 based firmware for Marble ? ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [March 30, 2025, 7:50am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/20 "2025-03-30T07:50:12Z")
There's only two Qualcomm SDK that are available, 19.07 based which the current firmware is based on or the 23.05 one. OP24 firmware for the Marble would be incredible though. ---
**Author:** ![mbooma](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/e19adc/32.png) [@mbooma](https://forum.gl-inet.com/u/mbooma)\ **Post date:** [March 30, 2025, 8:16pm UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/21 "2025-03-30T20:16:16Z")
and this ? > **[GitHub - TheRootED24/GL.iNET-B3000-MARBLE-fit-images: Vanila Openwrt fit images...](https://github.com/TheRootED24/GL.iNET-B3000-MARBLE-fit-images/tree/main)** > > main ---
**Author:** ![hecatae](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/hecatae/32/20467_2.png) [@hecatae](https://forum.gl-inet.com/u/hecatae)\ **Post date:** [March 31, 2025, 9:18am UTC](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704/22 "2025-03-31T09:18:22Z")
That's using ath11k drivers, the current Qualcomm SDK that GL use is using ath12k drivers [Next page](https://forum.gl-inet.com/t/any-beta-firmware-available-for-the-marble/51704.md?page=2)