AP Mode Help

[will.qiu]

Glad to hear that the previous issue has been resolved.

@Radiocrazy

Just a quick question on the Flint 3 why is it if you use the DFS channels and tick the 802.11r Fast Transition under the WLAN Roaming in LuCI, when you restart the router the 5.8GHz band no longer works unless you drop down to the non DFS channels.

Regarding enabling 802.11r, due to poor compatibility between the Qualcomm Wi-Fi driver and LuCI, we recommend following the configuration steps in the post below instead of Luci:

How to enable the 802.11r (Fast Roaming) for WiFi in Flint 3 (GL-BE9300)

Flint 3 (GL-BE9300) WiFi supports 802.11r, it requires to SSH to the router and enabled by executing commands. We found that 802.11r does not work on Luci, like say if manually enabled the "802.11r Fast Transition" in Luci, WiFi (AP) will disappear (no broadcast). [Bruce_2025-08-01_18-03-55] In order to enable 802.11r for Flint 3, we need to SSH to the router, and execute the following uci commands to enable 802.11r, WiFi works without issue in this way. Kindly note: Before executing these…