AR-750 won't reconnect

thunk · 2019-03-02T22:24:22.491Z

Where can I get testing firmware?

kyson-lok · 2019-03-04T02:53:07.360Z

You can find it in here. http://download.gl-inet.com/firmware/ar750/testing/

thunk · 2019-03-04T15:47:55.835Z

Thanks, I will check that out.

Yesterday, I confirmed the Jetpack is transmitting on 5Ghz and the 750 transmitting on 2.4Ghz. This morning I encountered another instance of the 750 dropping connection and not re-connecting, so it doesn’t appear to be caused by using the same channel for both WAN and LAN sides.

kyson-lok · 2019-03-06T03:27:37.611Z

thunk:

750 dropping connection and not re-connecting

Are you using the latest v3.x testing firmware? If so, it might be a bug. Because it has a blocklist machine, it will add the SSID to block list when it fails to connect it. Will fix it later.

John · 2019-03-09T01:10:06.478Z

Having the same problem with the Glinet SLATE (and firmware 3.0.0.9). I’ve spent all day using LUCI to configure a client-mode bridged connection to an AP, only to discover this bug myself. Anytime the Access Point to which I connect loses power/connection, the GLINET does NOT reconnect on its own (a reboot fixes it, as does reconnecting via the admin page). This makes it almost unusable for my particular uses.

sos_sifou · 2019-03-09T02:10:47.372Z

Hi @John use the travelmate service, it will reconnect automatically if it looses connection to the main router

Sat Mar 9 00:32:28 2019 user.info travelmate-[1.2.0]: interface ‘trm_wwan’ on ‘radio1’ connected to uplink ‘VIKRANT84/-’ (GL-AR750S, OpenWrt 18.06.1 r7258-5eb055306f)
Sat Mar 9 03:20:29 2019 user.info travelmate-[1.2.0]: uplink ‘VIKRANT84/40:9B:CD:2F:B4:50’ is out of range (0/35), uplink disconnected (GL-AR750S, OpenWrt 18.06.1 r7258-5eb055306f)
Sat Mar 9 03:20:49 2019 user.info travelmate-[1.2.0]: interface ‘trm_wwan’ on ‘radio1’ connected to uplink ‘VIKRANT84/-’ (GL-AR750S, OpenWrt 18.06.1 r7258-5eb055306f)

You can see here that it lost connection at 03:20:29 and then it reconnected in 20 seconds

glitch · 2019-03-09T09:19:35.630Z

Travelmate - more details here:

AR750s Keeps disconnecting Technical Support for Routers

Hello guys, Update 1 Using Travelmate Service on the Slate AR750S After some time testing with the above config, I can report the following: Used it in office as my main network device, so far so good, no frequent disconnections Using it at home also and so far no more disconnections, neither from the main router to the slate nor my devices from the slate Will be traveling soon and will test again with hotel wifis, captive portals and so OpenVPN is working on this firmware Can’t seem to be …

thunk · 2019-03-09T17:12:35.835Z

what is “travelmate?”

John · 2019-03-09T18:26:07.463Z

Got travelmate going, it seems to be working. Thank you for the help!

thunk · 2019-03-09T23:57:55.604Z

Yes, of course I saw the preceding messages. Both refer to travel mate. Neither explained what it is.

No problem. I’ll just return this buggy piece of junk to Amazon. Thanks for your time.

sos_sifou · 2019-03-12T02:54:46.275Z

Hello Thunk, sorry we didn’t give more details, follow this link to a different thread AR750s Keeps disconnecting - #32 by wellnw

Travelmate is a package made for open Wrt firmware, it has a set of instructions and config to help you use a router as a travel router, it will easily connect to a wifi and repeat it, it is stable and it has a special script to connect easily to captive portals on hotels wifis. Well basically travelmate should be something implemented into our small router the Slate. In fact it is, they call the script, gh health, but looks like this one isn’t working well for some of us, so we are using the wonderful capabilities of this router to load different scripts. You are not entitled to use only official releases, if you have enough knowledge, you can even write your own software and make it work exactly as you would like to.

What you need to do is simple
First step is, delete this package using Puty (you will need to use some google)

killall gl_health
mv /usr/bin/gl_health /usr/bin/gl_health_bak

Then install travelmate files from Luci, to be more precise, packages.

After that, follow the instructions I sent you on the link.

There you go you have installed and set travelmate to enabled, now hopefully, you will have almost no disconnections and the router will reconnect automatically and quickly.

This router is a wonderful piece of tech, if the software was good. bugs are distroying it. hopefully, the devs are watching our frustration and they will soon release a bugfree firmware.

dbbarron · 2019-06-17T13:53:46.627Z

I am having the same troubles using the Slate to repeat an iPhone hotspot connection to a LAN port. After a disconnection, the Slate won’t reconnect to the iPhone hotspot unless you manually force this in the Slate interface UI.

I have absolutely no idea how to install packages on the Slate. Can someone please send explicit
instructions or point to some online resources.

Thx!

sos_sifou · 2019-06-17T15:10:58.363Z

@dbbarron Hi
They dev team fixed the issu on the new firmware, so there is no need to install a package.
Just head to official support page for the slate and download the update file and upload it to the router. Please report back if you are still facing problems