This GL firmware…
output of top command
Mem: 46408K used, 13504K free, 2080K shrd, 3100K buff, 10760K cached
CPU: 74% usr 25% sys 0% nic 0% idle 0% io 0% irq 0% sirq
Load average: 6.13 5.52 3.21 3/101 29504
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
2109 1 dnsmasq R 7868 13% 29% /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
1749 1748 root S 4044 7% 2% /www/api
4 2 root SW 0 0% 2% [kworker/0:0]
1032 1 root S 1640 3% 2% /sbin/rpcd
546 1 root S 1284 2% 1% /sbin/ubusd
1748 1 root S 4372 7% 1% /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
28699 12853 root R 1288 2% 1% top
120 2 root SW 0 0% 1% [kswapd0]
2655 1 root S 2064 3% 0% /usr/sbin/hostapd -s -P /var/run/wifi-phy0.pid -B /var/run/hostapd-phy0.conf
1836 1 root S 1360 2% 0% /usr/sbin/nlbwmon -o /var/lib/nlbwmon -i 24h -r 30s -p /usr/share/nlbwmon/protocols -G 10 -I 1 -L 10000 -Z -s 192.168.
12384 1718 root S 1196 2% 0% /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3
3 2 root SW 0 0% 0% [ksoftirqd/0]
1503 1 root S 3280 5% 0% /usr/sbin/rsyslogd -n
5145 1 root SN 2068 3% 0% /bin/sh /opt/YAMon3/yamon3.4.5.sh
1473 1 root S 1784 3% 0% /sbin/netifd
1 0 root S 1620 3% 0% /sbin/procd
7973 1 root S 1364 2% 0% /bin/sh /usr/sbin/mwan3track wan eth0 online 122.165.176.246 8.8.4.4 8.8.8.8 208.67.222.222 208.67.220.220
407 2 root SW 0 0% 0% [usb-storage]
25703 2 root SW 0 0% 0% [kworker/u2:2]
2332 1 root S 7432 12% 0% /usr/sbin/collectd -f
3502 1 root S 6396 11% 0% /usr/bin/gl_udp_server
3485 1 root S 5952 10% 0% /usr/bin/gl_mqtt_cli
3247 1 nobody S 3588 6% 0% /usr/sbin/openvpn --config /etc/openvpn/ovpn/server.ovpn --daemon --writepid /var/run/ovpn_server.pid
29437 29436 root S 3560 6% 0% wget -t 2 -T 6 --user-agent=Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (
1964 1 root S 2524 4% 0% /usr/sbin/nmbd -F
1965 1 root S 2468 4% 0% /usr/sbin/smbd -F
Load average is getting high…
And my syslog lists below log frequently…
Oct 24 02:01:02 Riddhu gl_mqtt_cli: Receive message failed(0)
Oct 24 02:01:12 Riddhu gl_mqtt_cli: Receive message failed(0)
Oct 24 02:01:12 Riddhu gl_mqtt_cli: Receive message failed(-3)
Oct 24 02:01:14 Riddhu gl_mqtt_cli: **************************count :1********************
Oct 24 02:01:19 Riddhu gl_mqtt_cli: *********url=https://gslb.goodcloud.xyz/gslb/getbucket?
Why gl_mqtt_cli trying to connect outside work ?