AR300M-Lite custom firmware

diapolon · 2017-08-24T20:07:49.000Z

HI,

I tried to flash may custom firmware:

and

but it stuck on boot, fixed red led.

It needed a patch for firmware?

alzhao · 2017-08-25T10:58:55.000Z

how many LEDs light up? I think it should just works.

diapolon · 2017-08-25T13:46:45.000Z

only red…

I fixed compiled version, my error on selected packages.

Official lede instead hangs!

alzhao · 2017-08-26T22:31:03.000Z

I will try official LEDE firmware.

alzhao · 2017-08-28T14:48:58.000Z

We tested the official LEDE firmware and it works just fine. Not sure what is the problem in you side.

diapolon · 2017-08-28T21:48:54.000Z

<span id=“result_box” class=“short_text” lang=“en”><span class=“”>I’ll have to try it again, thankyou!
</span></span>

Crazycat36 · 2018-05-31T04:38:34.599Z

Any instructions on installing official lede?

alzhao · 2018-05-31T04:41:37.357Z

Download official openwr/lede firmware
flash to the router using guide Firmware Upgrading - GL.iNet Docs or Debrick via Uboot - GL.iNet Docs

Crazycat36 · 2018-05-31T04:44:45.751Z

alzhao · 2018-05-31T04:49:06.193Z

You can use our compiled firmware. You can also use firmware from LEDE/Openwrt. The process is the same.

Crazycat36 · 2018-05-31T04:56:01.813Z

I am unsure how to go about installing lede/openwrt there is no guide to follow

Crazycat36 · 2018-05-31T04:57:04.563Z

I am having a huge problem adding a network interface. The web ui just tells me

Form token mismatch

The submitted security token is invalid or already expired!

In order to prevent unauthorized access to the system, your request has been blocked. Click “Continue »” below to return to the previous page.

alzhao · 2018-05-31T09:55:32.400Z

This token problem is a bug.

Then flash using the existing UI, don’t reserve any settings.

Crazycat36 · 2018-06-01T04:45:28.265Z

I ended up booting libreCMC and i’m getting a bit farther in my project but for some reason I am unable to establish a wireguard handshake.

alzhao · 2018-06-02T04:08:02.373Z

Just wait for our new UI then.