- How to switch to NAND for 128MB. Confusingly in Luci → System I see NOR at model and nand at target platform? I tried the Dip switch method in Uboot without succes. Will try again. I came to this topic here, but it is quite daunting and for me requires guidance tips.
From above quote to switch to NAND: Which file from here do I need to flash in u-boot ? I can confirm file openwrt-23.05.2-ath79-nand-glinet_gl-ar300m-nand-squashfs-factory did not work and remains in NOR.
From there follow below steps for U-Boot:
- Poweroff, connect Ethernet cable, press hold reset, power up (by power cable)
- In uboot enable DIP switch
- Do step 1 again and switch button to left
- select file to NAND flash
I did these approximate steps few times without succes. So I assume I am using the wrong file