# AR750 secondary router and VPN **URL:** \ **Category:** Router\ **Created:** [May 10, 2020, 4:18pm UTC](https://forum.gl-inet.com/t/ar750-secondary-router-and-vpn/10735 "2020-05-10T16:18:04Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![monnolo](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/96bed5/32.png) [@monnolo](https://forum.gl-inet.com/u/monnolo)\ **Post date:** [May 22, 2020, 8:56pm UTC](https://forum.gl-inet.com/t/ar750-secondary-router-and-vpn/10735/3 "2020-05-22T20:56:42Z")
Dear @rp201rp, first of all thanks for your reply. I’ve been working a bit on your notes and have to say that I’e implemented the port-forwarding as you suggested. Unfortunately I’m still not getting what would like to achieved. My **main goal** is to access via WiFi the configuration page of my GL-AR750 (to then activate the ExpressVPN), being still connected to my Fritzbox network. As said in my initial post, I’ve been following [this video-guide](https://www.youtube.com/watch?v=J5QJb3O19zI) in order to link the 2 routers. I then assigned the following IP addresses and IP pools as in picture below. But I soon realized that if I use the WAN port as LAN to connect the AR750 to the FritzBox, I cannot use the OpenVPN function. On the other hand, if I use the WAN port, I cannot access the AR750 anymore since it’s receiving one address (192.168.188.21) from the FritzBox which is different from the one I’ve assigned to access it (192.168.188.2). Feels a bit like in a maze 🙂 Any recommendation on what I’m doing wrong ? Thanks a lot for your support ! ![Senza nome_1](https://forum-static.gl-inet.com/original/2X/a/ac03f3a37e1a7a887b4f96d7e1e741dbf4e26557.jpeg) --- _[View the full topic](https://forum.gl-inet.com/t/ar750-secondary-router-and-vpn/10735)._