Ax1800 Flint Bug Report

Zoey · 2022-06-20T11:00:35.789Z

Thanks!
But is it the same problem as I have with my third flint and the CONVEXA-B?

alzhao · 2022-06-20T11:11:32.624Z

I am not sure. So the problem is:

When repeating Flint with firmware 4.x using B1300, it is not stable, right?

Zoey · 2022-06-20T11:15:59.665Z

If my Flint is my Router, with Firmware 4.x, and I connect my B1300 in WDS-Mode to it, to extend my Wi-Fi the B1300 disconnects after a few hours, and only reconnects after a restart. With the Flint on 3.x the connection is stable.

alzhao · 2022-06-21T04:25:37.372Z

I hope it is the same problem. Let’s wait for WDS fix in firmware 4.x

Zoey · 2022-06-21T09:59:09.348Z

Ok, that’s good, that there will soon be a fix for WDS problem, so you got the second also reproduced?

alzhao · 2022-06-21T10:12:02.961Z

Zoey:

you got the second also reproduced

I didn’t try connecting B1300 to Flint though.

Zoey · 2022-09-17T15:28:22.869Z

Is this now fixed or does the bug still exist?

alzhao · 2022-09-18T06:10:29.867Z

Sorry, need to clarify again, connect AX1800 as WDS client to B1300 or
Connect B1300 as WDS client to AX1800?

Zoey · 2022-09-18T08:01:41.281Z

B1300 as WDS client to AX1800, which disconnects after a few hours.
And AX1800 as WDS client to AX1800, which doesn’t connect at all.
At least these were the problems I had three months ago, I didn’t test v4 since this again.

alzhao · 2022-09-18T08:52:25.768Z

Can you test AX1800 firmware v4.1?

Zoey · 2022-09-18T09:14:45.893Z

If I find time I test it, but I can only Test AX1800 as WDS client to AX1800, since I replaced the B1300 with an AX1800. (So I now have four of them)

alzhao · 2022-09-19T09:19:49.050Z

Pls upgrade to 4.1 firmware, WDS should work.

Please note, WDS to (or from) B1300 is not supposed to work as they use different wifi drivers.

Zoey · 2022-10-01T13:51:47.627Z

I’ve tested v4.1.0 on AX1800 and B1300 today and so far it seems to work without problems on my four AX1800s and my B1300. I will stay on v4 for now. Many Thanks!

Zoey · 2022-10-01T14:53:45.160Z

I found a new Bug, on my B1300 (in WDS mode) under Applications I have the Sub-menu “Plugins” on my AX1800s (used in WDS and AP mode) this point does not exist. It only exists in Router mode.

B1300 (WDS mode):
grafik

AX1800 (WDS and AP mode):
grafik

Zoey · 2022-10-01T14:55:44.612Z

Also under System → Overwiew
If I use the UI in dark Mode, the graph is good readable on the B1300 and not so good on the AX1800.
AX1800:

grafik1038×232 9.59 KB

B1300:

grafik1039×223 10.1 KB

On the same page the external storage Tab is bugged on the B1300:
grafik
AX1800:
grafik

And the last Bug I found on my B1300 (WDS to a Repeater of another company):
grafik
I tried multiple reboots and the error is still very often shown, but everything works without problem, only the error is shown.

sammboi101 · 2022-10-01T15:15:58.423Z

Yes it has been fixed

alzhao · 2022-10-03T00:18:01.948Z

Zoey:

I found a new Bug, on my B1300 (in WDS mode) under Applications I have the Sub-menu “Plugins”

Actually we added the plug-in back in bridge mode because it does not conflict with bridge mode.

Zoey · 2022-10-18T11:32:21.548Z

grafik1035×660 12 KB

I can set a schedule for the guest network, even if it can’t be configured/used (guest-wifi), because the router is in AP/WDS-Mode. I think this is a Bug, it shouldn’t be possible to enable a schedule for this, or it should be possible to use the guest network even in AP/WDS-Mode.

alzhao · 2022-10-18T12:01:10.279Z

AP mode cannot use guest WiFi?

Zoey · 2022-10-18T12:14:19.616Z

grafik1035×436 7.09 KB

grafik1075×495 12.4 KB

grafik1026×717 18.2 KB