# AX1800 USB WiFi Help Needed

**URL:** <https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659>\
**Category:** Router\
**Created:** [April 5, 2023, 9:12pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659 "2023-04-05T21:12:38Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [April 5, 2023, 9:12pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/1 "2023-04-05T21:12:38Z")

</div>

Trying to use a Usb wireless adapter. Adapter is a Alfa Tube-UAC 2. Uses a Ralink RT3070 chipset.  
The router doesn’t seem to be recognizing it.  
Below is the output from lsusb command.

root@GL-AX1800:~# lsusb  
Bus 002 Device 001: ID 1d6b:0003 Linux 4.4.60 xhci-hcd xHCI Host Controller  
Bus 001 Device 003: ID 0e8d:7610 MediaTek WiFi  
Bus 001 Device 001: ID 1d6b:0002 Linux 4.4.60 xhci-hcd xHCI Host Controller

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![anon38652312](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/90db22/32.png) [@anon38652312](https://forum.gl-inet.com/u/anon38652312)\
**Post date:** [April 6, 2023, 12:50am UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/2 "2023-04-06T00:50:39Z")

</div>

> [@fice](#):
>
> Ralink RT3070

Install `kmod-rt76x0u` & reboot  
USB Wi-Fi adapters are generally unstable under Linux.

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [April 6, 2023, 4:03am UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/3 "2023-04-06T04:03:11Z")

</div>

I did that and got the same results. I’m running a linux desktop and the adapter works fine.  
I have seen where others have done what I’m trying to do, so figure it’s doable if I can figure out what wrong.

---

<div class="post-metadata">

**Author:** ![anon38652312](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/90db22/32.png) [@anon38652312](https://forum.gl-inet.com/u/anon38652312)\
**Post date:** [April 6, 2023, 4:47pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/4 "2023-04-06T16:47:12Z")

</div>

Have you deleted `/etc/config/wireless` or run `wifi reconf` in terminal?  
Is it visible in `iw list`?

---

<div class="post-metadata">

**Author:** ![wcs2228](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/wcs2228/32/6112_2.png) [@wcs2228](https://forum.gl-inet.com/u/wcs2228)\
**Post date:** [April 7, 2023, 2:09am UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/5 "2023-04-07T02:09:44Z")

</div>

> [@fice](#):
>
> Bus 001 Device 003: ID 0e8d: **7610 MediaTek WiFi**

It looks like the Alfa Tube-UAC2 has the Mediatek MT7610U chipset and requires the matching package.

> **[Tube-UAC2](https://www.alfa.com.tw/products/tube-uac2?variant=36473968361544)**
>
> Tube-UAC2 is a dual-band 2.4 GHz and 5 GHz IEEE 802.11n/ac standard, high-speed outdoor USB CPE. Tube-UAC2 is based on MediaTek MT7610U chipset which is supported in Windows and Linux OS environments. Application Suggested Related Products R36A...

_I do not work for and I am not directly associated with GL.iNet_

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [April 7, 2023, 5:33am UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/6 "2023-04-07T05:33:15Z")

</div>

Thanks for noticing that! I had read somewhere that it had a different chip set than that. Also, I ran lsusb and promptly disregarded what it said, apparently.  
It’ll be Saturday before I get a chance to try again, but I feel like I might be able to get it working now. I’ll report back what I figure out.

Thanks again!

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [May 15, 2023, 1:56pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/7 "2023-05-15T13:56:55Z")

</div>

I’m finally getting back to this project. At this point I’m unable to find a package that supports the Mediatek MT7610U. Am I just missing something again??

Thanks

---

<div class="post-metadata">

**Author:** ![fice](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/f/50afbb/32.png) [@fice](https://forum.gl-inet.com/u/fice)\
**Post date:** [May 23, 2023, 1:40pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/8 "2023-05-23T13:40:48Z")

</div>

It appears that there is not drivers for the Mediatek MT7610U chip set. From what I can find, there is if you use the lasted version of OpenWRT. My problem now is that I can’t find where the latest version of OpenWRT is available for the AX1800.

Has anyone installed OpenWRT on an AX1800?

---

<div class="post-metadata">

**Author:** ![K3rn3l\_Ku5h](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/k3rn3l_ku5h/32/5634_2.png) [@K3rn3l\_Ku5h](https://forum.gl-inet.com/u/K3rn3l_Ku5h)\
**Post date:** [May 23, 2023, 3:56pm UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/9 "2023-05-23T15:56:11Z")

</div>

follow this thread;

> [@GL-iNet AX1800 OpenWrt firmware](https://forum.gl-inet.com/t/gl-inet-ax1800-openwrt-firmware/19447/209):
>
> Thanks motox22a Just testing another build compiled last night if it boots and works well I will push it to snapshots folder. Please only use snapshots folder for downloading images.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:22am UTC](https://forum.gl-inet.com/t/ax1800-usb-wifi-help-needed/28659/10 "2025-10-29T04:22:09Z")

</div>


