已经在2.27固件的共享界面里选上WAN共享,但尝试从外网无法映射网络驱动器。我的网络具有公网ip且B1300为主路由。
内网连提示这个……怕不是对空格兼容性还是不好。2.27 8月15日的版本

重置路由后LAN可以访问了,WAN由于运营商封禁445端口而使得无法从外网访问。
patch
Johnex
7
You can either forward SMB via SSH using Putty on Windows, or use a VPN to remotely access the shares.
It is not possible to change smb to a different port if you want to mount the network drive in windows.
A guide for using putty:
http://www.blisstonia.com/eolson/notes/smboverssh.php
alzhao
8
啊,你总不能把共享设置到公网上去吧。那个是不可能成功的。必须是局域网,有网关控制。
就算公网可以用,那岂不是别人都可以用你的共享了?
公网一般用ftp,ftp,scp什么的。
nono
alzhao
10
路由器在你局域网里面的时候,可以share到他的wan,也就是你主路由的网络里面。
这种不是给Internet用的。
,做ftp服务端的话好像没luci界面插件可以配置吧。
alzhao
14
可以搜索包的,大哥。。。。。
have a try