# Beryl LuCI LED control not working?

**URL:** <https://forum.gl-inet.com/t/beryl-luci-led-control-not-working/27106>\
**Category:** Router\
**Created:** [February 6, 2023, 8:36am UTC](https://forum.gl-inet.com/t/beryl-luci-led-control-not-working/27106 "2023-02-06T08:36:04Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![hansome](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/h/b5ac83/32.png) [@hansome](https://forum.gl-inet.com/u/hansome)\
**Post date:** [February 6, 2023, 11:33am UTC](https://forum.gl-inet.com/t/beryl-luci-led-control-not-working/27106/2 "2023-02-06T11:33:03Z")

</div>

MT1300 led is controlled by both an i2c chip and GPIO. The screenshot you pasted is only related to GPIO part. [FYI](https://forum.gl-inet.com/t/gl-mt1300-led-control-instructions/13338).

---

_[View the full topic](https://forum.gl-inet.com/t/beryl-luci-led-control-not-working/27106)._