# Brume 2 as a Tailscale exit node **URL:** \ **Category:** Router\ **Created:** [February 27, 2023, 8:31pm UTC](https://forum.gl-inet.com/t/brume-2-as-a-tailscale-exit-node/27663 "2023-02-27T20:31:11Z")\ **Posts on this page:** 1\ **Showing post:** 37
**Author:** ![blancmange](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/e47774/32.png) [@blancmange](https://forum.gl-inet.com/u/blancmange)\ **Post date:** [January 2, 2025, 10:26am UTC](https://forum.gl-inet.com/t/brume-2-as-a-tailscale-exit-node/27663/37 "2025-01-02T10:26:11Z")
Is there a definitive way to enable a Tailscale exit node? Gl-Inet should really make this simpler, they have the exit node button already in the admin interface. Would this be better/easier...? > [@Tailscale 'Exit Node' on GL.iNet Routers?](https://forum.gl-inet.com/t/tailscale-exit-node-on-gl-inet-routers/49088/6): > > I managed to enable the 'Exit Node' option on my GL.iNet router. It actually turned out to be very simple, just had to send the following command via SSH, and that was it. No additional tweaks, firewall rules, etc. tailscale up --accept-routes --advertise-exit-node --advertise-routes=192.168.15.0/24,192.168.8.0/24 --accept-dns=false 192.168.15.0/24 - WAN Subnet 192.168.8.0/24 - LAN Subnet Router details Model: Brume2 Firmware: 4.7.0 (beta) Tailscale version: 1.66.4.-1 (default on this fir… --- _[View the full topic](https://forum.gl-inet.com/t/brume-2-as-a-tailscale-exit-node/27663)._