# Brume 2 + OpenWRT\] Tailscale neither --advertise-routes nor --advertise-exitnode work

**URL:** <https://forum.gl-inet.com/t/brume-2-openwrt-tailscale-neither-advertise-routes-nor-advertise-exitnode-work/64363>\
**Category:** Router\
**Created:** [September 28, 2025, 8:12am UTC](https://forum.gl-inet.com/t/brume-2-openwrt-tailscale-neither-advertise-routes-nor-advertise-exitnode-work/64363 "2025-09-28T08:12:06Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [September 28, 2025, 10:41am UTC](https://forum.gl-inet.com/t/brume-2-openwrt-tailscale-neither-advertise-routes-nor-advertise-exitnode-work/64363/2 "2025-09-28T10:41:12Z")

</div>

Hello,

For the Vanilla OpenWRT firmware and installed Tailscale plugin in it, please email to the Tailscale support team or consult in the OpenWRT community, as this seems to be beyond our support range, truly sorry.

If the router is GL firmware, you can implement Brume2 hosting as Exit Node by modifying the Tailscale startup script in SSH terminal to router, please refer to this thread:

> [@Tailscale settings lost on reboot](https://forum.gl-inet.com/t/tailscale-settings-lost-on-reboot/31524/19):
>
> Yeah I see that now after you posted that dir list. The more I look at this the more it seems all so familar: This is untested code to enable exit nodes I never got feedback on from someone else but here: sed '/param="$param --exit-node-allow-lan-access --exit-node=$exit\_node\_ip"/a\ param=“$param --advertise-exit-node --allow-exit-node --allow-routes”' /usr/bin/gl\_tailscale \>\> \ /usr/bin/gl\_tailscale.new && mv /usr/bin/gl\_tailscale /usr/bin/gl\_tailscale.stock \ && mv /u…

---

_[View the full topic](https://forum.gl-inet.com/t/brume-2-openwrt-tailscale-neither-advertise-routes-nor-advertise-exitnode-work/64363)._