BrumeW /w VPN policy to exclude some device, instead it disabled ALL VPN instead

ccchan · 2020-09-05T18:44:39.553Z

(VPN seems will re-connect itself, but the button I have to set to be no function,
instead of set it to vpn and physically turn it on)

robotluo · 2020-09-07T07:23:59.405Z

By default, if the list is empty, all devices are represented.
You can try the following configuration

image782×598 19.8 KB

robotluo · 2020-09-07T07:29:28.753Z

You’ve set up your PC not to go through a VPN, right?
Kill switch does not conflict with policy. If you have set your PC not to pass VPN, kill switch will not intercept

ccchan · 2020-09-07T15:35:57.452Z

hi, I got a PC A, which I WANT VPN 100% the time, then a PC B that NO VPN all the time.

Yesterday,
I set BrumeW into VPN mode, internet kill switch ON. Fine, PC A surf using VPN.

I dont have PC B installed yet, but I would like to PREPARE the VPN policy,
I turn on the VPN policy, with NIL in the list.

THEN it sucks, PC A now surf using ISP IP, as you mentioned above.

THIS IS A WRONG LOGIC,
please ask the programmer/manager to study back mathematics.

there is object A and B,
The list I want to exclude is empty, which SHOULD means EXCLUDE NONE.

And brumeW’s logic NOW is to exclude EVERYTHING?

I bet 99.9999% people will stand on my side.

Please think about it.
Thanks.

btw, I am an BrumeW, 3.104, the text I got is some how differ from your graph above.
It says as below.
Anyway, that still doesn’t make sense.

Thank you.

Please Choose Rules

Do not use VPN for the following

Do not use VPN for the items in the list	Action
	Add
All Mac Address

Apply

ccchan · 2020-09-07T15:38:57.403Z

I think you do not yet get my idea,

the kill switch is to PROTECT us, so that when there is no VPN,
nothing is sent out.

yet if I turn on VPN already, but also turn on VPN policy WITH a empty list,
then all connected devices are suring using ISP IP == danger

(when the list is empty, yes the devices are listed out,
but ALL of them are then turned into using ISP IP!
So if you can digest what I say, can understand, you should know
the KILL SWITCH is NOT SAFE)

thanks

ccchan · 2020-09-07T15:44:05.708Z

image1920×999 54.3 KB

hi as said above,
when VPN is ON, kill switch is ON,
and when the list is empty, as in the screen shot,
everything is using ISP IP!

the kill switch should not be overide with a EMPTY list (I dont mind
if it is overide by a SET list, but must not be by an empty list).

thanks

ccchan · 2020-09-07T15:48:49.583Z

the problem here is,

when I set PC A to use VPN,
and with a kill switch to hope to keep so.

an empty list (made by activating VPN policy, but not yet add-ed the PC B as it’s
not yet installed. ) turn PC A to use ISP IP to surf.

that’s not logical.

Happi · 2020-09-07T16:50:00.850Z

ccchan:

hi, I got a PC A, which I WANT VPN 100% the time, then a PC B that NO VPN all the time.

Yesterday,
I set BrumeW into VPN mode, internet kill switch ON. Fine, PC A surf using VPN.

I dont have PC B installed yet, but I would like to PREPARE the VPN policy,
I turn on the VPN policy, with NIL in the list.

THEN it sucks, PC A now surf using ISP IP, as you mentioned above.

THIS IS A WRONG LOGIC,
please ask the programmer/manager to study back mathematics.

Here’s what I expect:
If the Internet Kill Switch is enabled, then NO traffic should go through the ISP.
If VPN Policies (eg, exceptions) are then added, then NO traffic should go through the ISP until these are APPLIED (ie. the Apply button is clicked).

ccchan · 2020-09-07T17:06:03.378Z

you should also mention if there is VPN or if there is no VPN.

your message is not concise.

thx for reply.

ccchan · 2020-09-07T17:19:20.694Z

What I THINK should be:

Background:

there is PC A, aim for using VPN IP
there is PC B, aim for ISP IP (but not yet installed)

for VPN policy I will set PC B to be excluded from VPN usage,
but since PC B is not installed, I don’t know the MAC/IP,
so VPN policy is ON, but list is empty. (I assume this will mean exclude NOTHING,
but luochongjun above say this means exclude EVERYTING)! <— the logic is wrong here!

case A: Kill Switch ON, VPN +, PC A using VPN IP
case B: Kill Switch ON, VPN -, PC A should offline, but now PC A is using ISP IP!

it’s leaking thru ISP IP!

Happi · 2020-09-07T17:49:20.920Z

ccchan:

you should also mention if there is VPN or if there is no VPN.

Well, the Internet Kill Switch should kill anything not going through the VPN, so if VPN not enabled, then no traffic.
Regarding the VPN Policies, then everything excluded can go out to the internet. All other traffic would be dependent on whether the VPN is enabled or not.

ccchan · 2020-09-07T18:01:09.886Z

yes what you said is what expected,

the only thing is:

when the total list is PC A, PC B.

if u state “exclude B”, then ofcoz result is exclude B. BrumeW did this.

But when you state “exclude empty list”, I expect exclude nothing, but BrumeW now is exclude EVERYTING.
that’s the problem.

And I made my self clear enough.

Happi · 2020-09-07T18:43:06.757Z

Agreed, If you enable VPN Policies and select “do not use for the following”, then it should be that everything still goes through the VPN, except items listed - if that list is empty => no exclusions (or NOTHING, as you put it).

ccchan · 2020-09-07T19:08:52.891Z

final:

as seen in this photo.

“do not use VPN for the following”,

the list is empty,

HOWEVER, there is a “ALL mac address” there,
and thus means “exclude everything”.

literally, the router is correct,
but logically, this is wrong.

Happi · 2020-09-07T20:37:24.256Z

Yes, I see that now - appears that “all MAC addresses” is the default.

alzhao · 2020-09-08T04:34:34.904Z

There is NO “empty list”.

You cannot exclude nothing. It has to be All or Something.

If you want to exclude NOTHING, think our include ALL.

ccchan · 2020-09-08T06:59:31.832Z

Just want to say in everyday language,
exclude (empty list) = exclude nothing. exclude ALL = really exclude ALL.

The brume may behave like what you say (exclude empty list also = exclude ALL) for some reason,
may be this is easier for programming etc.

but certainly, layman will think as the everyday language i mentioned above,
as agreed by another user.

thanks

alzhao · 2020-09-08T08:39:38.682Z

I do agree with you.

Now the UI is designed by Engineers, not product managers. We need better design to make it work for consumers. We will develop this on smartphone app.

Happi · 2020-10-25T10:16:32.366Z

Been a little while, but I have re-visited this and done some further testing.
My conclusion is that I wholly concur with posts 1 and 3:

The VPN policy is flawed in that if you set “Use VPN for all processes on the router” and click apply with an empty exclusion list (ie. everything is included) it does the complete opposite to what it says. ie. ALL traffic is excluded and uses ISP.

Regarding the Kill-Switch - this also fails as it is over-riden in the above scenario (ie. use VPN for all processes and set an empty exclude list).

I would kindly ask that these serious leak issues are addressed ASAP!

GL749×591 16 KB

alzhao · 2020-10-25T15:51:29.089Z

From your screenshot, it is clearly that, you exclude all for vpn, i.e. do not use vpn for all.