Can we get an ETA on the next release?

Technical Support for Routers
21

@madscientist_42

I think there is a problem of your repo.

What model are you using? AR300M? Are you in the nor firmware or Nand firmware?

Your logs shows that you are in the Nor firmware because the path is “ar71xx/2.26”. If you are using the Nand firmware the path should be “ar71xx_nand/2.26”. This should be set by the firmware itself.

If you download the firmware manually from testing folder, please redownload the firmware firm now.

Please let me know if there is anything wrong.

 

 

Here is my log

root@GL-AR300M:~# opkg install kmod-rtl8192cu

Installing kmod-rtl8192cu (3.18.27+2016-01-10-1) to root…

Downloading 404 Page not found - GL.iNet 2cu_3.18.27+2016-01-10-1_ar71xx.ipk.

Installing kmod-rtlwifi-usb (3.18.27+2016-01-10-1) to root…

Downloading 404 Page not found - GL.iNet i-usb_3.18.27+2016-01-10-1_ar71xx.ipk.

Installing kmod-rtlwifi (3.18.27+2016-01-10-1) to root…

Downloading 404 Page not found - GL.iNet i_3.18.27+2016-01-10-1_ar71xx.ipk.

Installing kmod-rtl8192c-common (3.18.27+2016-01-10-1) to root…

Downloading 404 Page not found - GL.iNet 2c-common_3.18.27+2016-01-10-1_ar71xx.ipk.

Installing rtl8192cu-firmware (2016-01-25-52442afee9907bc32a058f22bb3295d040677c 26-1) to root…

Downloading 404 Page not found - GL.iNet irmware_2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1_ar71xx.ipk.

Configuring kmod-rtlwifi.

Configuring rtl8192cu-firmware.

Configuring kmod-rtlwifi-usb.

Configuring kmod-rtl8192c-common.

Configuring kmod-rtl8192cu.

 

22

It’s in the NAND side of things (I don’t think you’ve got 100Mb of NOR on these boards… :D)

Having said this, I presumed something you did- that the settings for the lists would be pointing to their respective NAND/NOR repositories based on which configuration is being ran from (Which is why I was confused as to what gave.). I looked in the settings. It was in the NAND boot with the NOR repositories set in the configuration. One hand-edit to make them all point to the right places and a reload and it’s “happy” now.

If it’s intended to switch as described…it’s not.

23

I think you upgrade from old firmware and reserved settings. This could be the reason. This is a bug.