10

@ed_venture

I had to uboot a couple of B2200s today, no problems with loading image.

I did use this firmware here which was given to me by Gl.Inet (use at your own peril :stuck_out_tongue: )

Process (and LED status is from memory because I forgot to write it down when I did it but think this is it).

  1. Disconnect power
  2. Press and hold reset button
  3. Insert power
  4. Top LED flashes blue and then goes solid
  5. Release reset button
  6. Manually set device to 192.168.1.2 255.255.255.0
  7. Insert cable into LAN port
  8. Browser to 192.168.1.1
  9. Load and upgrade

Don’t forget to change your device back to DHCP or to a 192.168.8.x device so you can access the router once it’s rebooted.