Can't acces to my NAS/device when using tethering

Nanite · 2022-05-09T20:20:17.439Z

Hello

I do not have access to my NAS when I use my router in repeater mode. Here is my setup.
I use my phone in 4g data connection sharing. My glinet flint use this connection.
My NAS is connected to RJ45 on my Glinet Flint.

I use the adress ip 192.168.8.1 to acces but I can’t. Same for my Hue lamp.

Sans titre1902×628 119 KB

image803×685 46.3 KB

Before i used the Flint with my ISP modem with rj45 and the connection to my NAS works well.

Is there a solution to have access to the internet, and access to all my equipment connected to the modem and access to the admin page. (Like a “switch”)

Thanks you

GL-AX1800 / Flint 3.213

wcs2228 · 2022-05-09T21:59:03.993Z

It looks like the router LAN is on subnet 192.168.8.x and the NAS has been set up with a static IP address on subnet 192.168.1.x.

I do not work for and I am not directly associated with GL.iNet

Nanite · 2022-05-09T23:33:07.721Z

Yes, That’s right !
I change the LAN ip to 192.168.1.2 with the range 192.168.1.2 to 192.168.1.254.

image1303×855 52.7 KB

My NAS is on http://192.168.1.24:5000/ it’s working my tv and my pc can acces to the NAS.
For the hue lamp I unplug and reset the bridge. It’s working.
Thank you.