Can't setup new wireless SSID/access point on my VLAN

[bruce]

Did you would like to add a new WiFi radio, probably for IoT devices?

If yes, please refer to this thread:

WiFi and subnet configuration help - MT6000 Flint2

GL GUI -> Network -> Guest network, here can change the subnet IP. The 'br-guest' is hard code. [image] It's not sense and cannot feasible, unless manually custom add a route rule. Add a new SSID for IoT WiFi for MT6000, on the SSH: # /etc/config/network uci add network device # =cfg1b0f15 uci set network.@device[-1].type='bridge' uci set network.@device[-1].name='br-iot' uci set network.iot=interface uci set network.iot.proto='static' uci set network.iot.device='br-iot' uci set net…