# Can't setup new wireless SSID/access point on my VLAN

**URL:** <https://forum.gl-inet.com/t/cant-setup-new-wireless-ssid-access-point-on-my-vlan/52777>\
**Category:** Router\
**Created:** [January 6, 2025, 8:40pm UTC](https://forum.gl-inet.com/t/cant-setup-new-wireless-ssid-access-point-on-my-vlan/52777 "2025-01-06T20:40:06Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [January 7, 2025, 8:02am UTC](https://forum.gl-inet.com/t/cant-setup-new-wireless-ssid-access-point-on-my-vlan/52777/2 "2025-01-07T08:02:05Z")

</div>

Did you would like to add a new WiFi radio, probably for IoT devices?

If yes, please refer to this thread:

> [@Create Add Multiple WiFis/Radios Configuration - MT6000 Flint2](https://forum.gl-inet.com/t/wifi-and-subnet-configuration-help-mt6000-flint2/51254/2):
>
> GL GUI -\> Network -\> Guest network, here can change the subnet IP. The 'br-guest' is hard code. It's not sense and cannot feasible, unless manually custom add a route rule. Add new SSID WiFi for MT6000 (v4.8.3, stable), on the SSH: #Notes: #1. Add 2 new subnets: "br-iot" and "br-custom", with isolation between br-lan. #2. Add separate 2.4 GHz and 5 GHz Wi‑Fi radios for the "iot" and "custom" network. #3. The "From-Specified Connection Types" in the VPN policy mode, support d…

---

_[View the full topic](https://forum.gl-inet.com/t/cant-setup-new-wireless-ssid-access-point-on-my-vlan/52777)._