Change GUI for log in screen and network name?

rovdiver · 2019-12-23T17:57:49.009Z

Is it possible to change the login screen and name of the router it self on the network?

If so, how? Do I need to compile a new firmware?

Johnex · 2019-12-23T20:22:05.205Z

You can change the name in the following files:

/etc/config/system
/etc/config/network
/etc/config/samba

rovdiver · 2019-12-23T20:43:18.331Z

How can I access these folders…?

rovdiver · 2019-12-23T20:44:50.380Z

FTP to the routers IP?

Johnex · 2019-12-23T20:52:24.755Z

Follow the SSH guide here:

docs.gl-inet.com

SSH to the Router - GL.iNet Docs

Documentation for GL.iNet Productions

rovdiver · 2019-12-23T21:11:37.155Z

Network unavailable… Both on LAN, WAN and wifi…

Johnex · 2019-12-23T21:18:19.608Z

What router are you using? Are you on the latest firmware version?
Can you post what version that is?

rovdiver · 2019-12-23T21:19:55.300Z

300M, latest firmware…3.19 I believe… will check

rovdiver · 2019-12-23T21:23:28.319Z

mitt fel…!

the router is set up as AP… therefore, the IP is given from my main router, wich is totally different…

Skål !

Johnex · 2019-12-23T21:44:34.996Z

God jul på dig!

Du kan prova senaste testing också:

https://dl.gl-inet.com/firmware/ar300m/testing/

rovdiver · 2019-12-23T21:54:40.005Z

Kan se på den litt senere
Nå vil jeg bare ha routeren til å bli noe annat på nettverket

Fikk bare IEEE Registration Authority etter å ha byttet navn på den… merkeligt…

rovdiver · 2019-12-23T21:55:22.208Z

Å God Jul til Deg også !

rovdiver · 2019-12-23T22:13:22.648Z

Noen ide om hvordan jeg kan forandre log in screen?
Ønsker KUN brukernavn og passord, ikke info om hvilken enhet dette er…

Johnex · 2019-12-24T23:43:28.524Z

Hmmm. To remove that one you would have to go into the HTML code for the router ui.

You will find all the files in

/www/src/

rovdiver · 2019-12-25T17:58:24.180Z

Found the files… However, I am not experienced enough to change this with CSS or JS editor… Could you please help me?

Johnex · 2019-12-25T23:48:59.272Z

@robotluo @lancer @hansome

lancer · 2019-12-26T01:19:04.499Z

@rovdiver
Hi, The name of the login screen and the name on the network are not the same.
You can modify the name of the login interface in the /www/src/temple/login/index.html file as following,
<p class=" text-center active clsDeviceSSID">
GL-{{t(productName)}}
</p>
And you can edit the /etc/config/network file to modify its hostname on the network as follow command,
uci set network.wan.hostname=‘GL-AR750S-33f’
uci set network.wwan.hostname=‘GL-AR750S-33f’
uci set system.@system[0].hostname=‘GL-AR750S-33f’
uci set samba.@samba[0].name=‘GL-AR750S-33f’
uci commit network
uci commit system
uci commit samba
Thanks.