Change HTTPS Port on B1300?

dslucki · 2021-09-09T22:50:24.267Z

I’d love to change the HTTPS port on my B1300.

The problem I am having is that I want to change the port for HTTPS from 443 to something else.
I’m not an expert but I’m sure there’s a way to change the HTTPS port that my Convexa B router listens on.

I think this is what I need:
SSH into my B1300
vi /etc/lighttpd/lighttpd.conf
find where is shows https is using port 443
change it to something else
save

Configure Firewall:
change the port on firewall from 443 to something else
save

reboot B1300

Is this correct?

Thanks in advance!

alzhao · 2021-09-10T09:46:02.956Z

Do you want to access the router via https from the WAN side?

You should check the files at /etc/lighttpd/conf.d/

The 30-openssl.conf is for https. Just change the port number

To access from wan side, you need to open port with the new number

dslucki · 2021-09-10T15:36:47.155Z

alshao - thanks for the information. Yes, I do want to access this from the WAN side. So I changed the firewall rule from port 443 to my new port number and it works!

So, if anyone needs to know what I did:
SSH into the B1300
vi /etc/lighttpd/conf.d/30-openssl.conf
changed the following line
$SERVER["socket’] == “0.0.0.0:443” { <— put your port number in place of 443 here
saved the file
went into the firewall via web interface>More Settings>Advanced
Logged in as root
Go to Network>Firewall
Edited the rule called glservice_https to change port to new port number