Client doesn't show up on WAN port when using WAN as LAN

44cort44 · 2023-01-05T05:55:11.540Z

Slate Plus using Dec 28th 4.2 firmware.

When I have the device configured as a repeater and have devices on ports 1, 2, and 3, port 3 doesn’t show as having an active client on the clients page despite there actually being one there.

44cort44 · 2023-01-20T20:24:15.418Z

Is this something that is known? Using WAN as LAN, it doesn’t show the WAN port client in the client list.

alzhao · 2023-01-27T09:08:01.337Z

Does the device connected to the WAN port has normal Internet? If yes, it should how in the client list.

If you used static IP, it may be a problem though. DHCP should work just fine.

44cort44 · 2023-01-27T12:39:46.102Z

Yes it does have internet. It’s using DHCP in the router and everything works just fine besides it just not showing up in the client list.

44cort44 · 2023-01-27T17:59:00.428Z

Screenshot_20230127-1156011080×1089 93.2 KB

Screenshot_20230127-1154431080×604 49.6 KB

Screenshot_20230127-1153211080×984 71.3 KB

Screenshot_20230127-1159331080×1098 108 KB

You can see there are 3 clients but only 2 show up. All 3 have internet and “work” fine.

alzhao · 2023-01-30T10:25:44.275Z

I tested. On 4.1.2 it has this problem.

But on 4.2.0 snapshot it does not have this problem any more.