# Configuring VLANS on Flint 2

**URL:** <https://forum.gl-inet.com/t/configuring-vlans-on-flint-2/49291>\
**Category:** Router\
**Tags:** KB\
**Created:** [October 18, 2024, 5:41pm UTC](https://forum.gl-inet.com/t/configuring-vlans-on-flint-2/49291 "2024-10-18T17:41:58Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![michel.feria](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/m/9de053/32.png) [@michel.feria](https://forum.gl-inet.com/u/michel.feria)\
**Post date:** [June 21, 2025, 8:43am UTC](https://forum.gl-inet.com/t/configuring-vlans-on-flint-2/49291/8 "2025-06-21T08:43:31Z")

</div>

Hi, after 2 days of intense work, I have successfully done the job 😀 I can help you if you want. very important, I flashed the openwrt 24.10 firmware as maybe the stock firmware is buggy. Other important details: after some save & apply, the router should be rebooted to get the new config.  
this post also was very important: [Flint 2 (GL-MT6000) VLAN Setup](https://forum.gl-inet.com/t/flint-2-gl-mt6000-vlan-setup/59103)  
last thing: the uplink port should be a trunk, in my case is connected to a pfsense firewall and this last one manage the DNS, DHCP, etc so my flint 2 is a "dumb" router in AP mode.  
let me know if you need some guidance  
\*I'm missing the wifi separated SSID for one of the 2 VLAN that I configured, so at the end I have 3 ports and wifi in my main untagged LAN, one port in VLAN 10 and other port in VLAN 20.  
btw in my case I had a lot of dns leaks with a giant unique LAN and that's why I decided to use VLANs.

---

_[View the full topic](https://forum.gl-inet.com/t/configuring-vlans-on-flint-2/49291)._