1

Hi everyone,
I've purchased the GL.iNet MT2500A (Brume 2) and would like to configure as an external VPN (hide/protect the traffic) to my existing Fritz!Box (my ISP router). I'm not looking on how to create an access from the outside.
If I understood correctly, the correct features to activate are

  • activate the "Drop-In gateway"
  • activate the DHCP feature
  • deactivate the DHCP feature on my router.
    After rebooting the 2 devices, my router lost access to internet. And when I reactivated the Fritz!Box DHCP feature, Internet came back.
    I tried many different things but I'm stuck here. Anyone has an idea?
2

What Fritz!Box and what ISP do you use?

Disabling DHCP should only affect the LAN. Don't Disable DHCP on WAN side, if there is even some option for that.

3

Fritz!box: 7530 AX
ISP: 1&1

I tried disabling it on the ipv4 section :slight_smile:

Capture d’écran 2024-09-01 à 15.06.39
Capture d’écran 2024-09-01 à 15.06.391916×1132 229 KB

Should it be done differently?

4

Nope, seems to be the right place.

Will the Fritz!Box itself tell you that there is no internet connection then?

5

Well good news, when trying to replicate the behavior, it started to work.
It seems like the DSL connection takes a bit longer to initialize when having the drop-in gateway feature activated.
Anyway, thanks for the support!

6

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.