# Correct configuration info

**URL:** <https://forum.gl-inet.com/t/correct-configuration-info/7234>\
**Category:** Router\
**Created:** [June 14, 2019, 6:45am UTC](https://forum.gl-inet.com/t/correct-configuration-info/7234 "2019-06-14T06:45:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![boomhauer](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/b/a9a28c/32.png) [@boomhauer](https://forum.gl-inet.com/u/boomhauer)\
**Post date:** [June 14, 2019, 6:45am UTC](https://forum.gl-inet.com/t/correct-configuration-info/7234/1 "2019-06-14T06:45:31Z")

</div>

Continuing the discussion from [GL-MT300N-V2 USB tether bridge to ethernet?](https://forum.gl-inet.com/t/gl-mt300n-v2-usb-tether-bridge-to-ethernet/3921):

Can someone point me the direction of the actual correct configuration to achieve this setup along with being able to use DDNS that my main router is providing? If only this little router had the range and the ports of it then i wouldnt need that one but until i can replace it i am stuck with this combo so any help would be greatly appreciated. Thank you

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:08am UTC](https://forum.gl-inet.com/t/correct-configuration-info/7234/2 "2025-10-29T04:08:23Z")

</div>