# DHCP Assign, LAN IP, Bandwith monitor, etc. MT-300N-V2

**URL:** <https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806>\
**Category:** Router\
**Created:** [January 17, 2021, 7:54am UTC](https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806 "2021-01-17T07:54:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Blebekblebek](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/blebekblebek/32/3791_2.png) [@Blebekblebek](https://forum.gl-inet.com/u/Blebekblebek)\
**Post date:** [January 17, 2021, 7:54am UTC](https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806/1 "2021-01-17T07:54:57Z")

</div>

Just bought and receive my units, so far the UI is so dumbed down is so similar like totolink units, I can’t even change the unit name. Sure doesn’t matter as long it works.

Questions.

1. How to set DHCP assign because I don’t see any menu to do that except in luci interface.

2. Why LAN IP limited to header with 192/172/10? I can change it (via LUCI again) but often the ip will just revert back to default after the unit is plugged off.

3. I read somewhere this version will have a bandwith monitor similar to gargoyle had, but so far the only thing I see is monitor based on text only.

4. Why some devices still listed in offline device even after the units has been rebooted?

Personally I bought this units to replace my old wr740 (with gargoyle) but almost everything is locked/limited idk if I made the right decision to purchase this unit.

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [January 17, 2021, 4:26pm UTC](https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806/2 "2021-01-17T16:26:57Z")

</div>

1. You can change DHCP options in luci.

2. Check [Private network - Wikipedia](https://en.wikipedia.org/wiki/Private_network) for LAN IP ranges.

3. Cannot understand.

4 It record client list

---

<div class="post-metadata">

**Author:** ![Blebekblebek](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/blebekblebek/32/3791_2.png) [@Blebekblebek](https://forum.gl-inet.com/u/Blebekblebek)\
**Post date:** [January 19, 2021, 2:57am UTC](https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806/3 "2021-01-19T02:57:50Z")

</div>

All of these problem is fixed by installing gargoyle instead. Done.

> **[dl.eko.one.pl](https://dl.eko.one.pl/gargoyle-pl/openwrt-18.06/targets/ramips/mt76x8/)**
>
> OpenWrt, Linux, USB, notebooki i inne ciekawe rzeczy

Thx and bye.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:12am UTC](https://forum.gl-inet.com/t/dhcp-assign-lan-ip-bandwith-monitor-etc-mt-300n-v2/13806/4 "2025-10-29T04:12:26Z")

</div>


