1

I have a GL.inet SLATE travel router that has an Openwrt based firmware. I want to set up a DHCP server that provides IP addresses in a range, for example starting 192.168.1.100.

This is because I need the network to have certain static IP addresses that I can assign from 192.168.1.1 to 192.168.1.99

2

Settings - LAN IP

Screenshot_20190727-101659
Screenshot_20190727-1016591080×2280 187 KB

Don’t forget thus will change your access to the router to 192.168.1.x (where x is whatever you set in LAN IP) not 191.168.8.1 (default)

3

Oh okay! My “LAN IP” page looks like this - with no option to change the DHCP range. Looks like I might need a firmware upgrade.

Screenshot%20from%202019-07-26%2018-49-42
Screenshot%20from%202019-07-26%2018-49-421920×1080 121 KB

Thanks!

4

@surf85 You could also do through the Luci interface (Settings - Advanced - Network-Interface–LAN-Edit )

image
image1814×1540 243 KB