DHCP IP range in gl.inet SLATE travel router

surf85 · 2019-07-26T21:59:55.232Z

I have a GL.inet SLATE travel router that has an Openwrt based firmware. I want to set up a DHCP server that provides IP addresses in a range, for example starting 192.168.1.100.

This is because I need the network to have certain static IP addresses that I can assign from 192.168.1.1 to 192.168.1.99

limbot · 2019-07-27T00:18:06.119Z

Settings - LAN IP

Screenshot_20190727-1016591080×2280 187 KB

Don’t forget thus will change your access to the router to 192.168.1.x (where x is whatever you set in LAN IP) not 191.168.8.1 (default)

surf85 · 2019-07-27T01:53:04.145Z

Oh okay! My “LAN IP” page looks like this - with no option to change the DHCP range. Looks like I might need a firmware upgrade.

Screenshot%20from%202019-07-26%2018-49-421920×1080 121 KB

Thanks!

limbot · 2019-07-27T05:50:22.671Z

@surf85 You could also do through the Luci interface (Settings - Advanced - Network-Interface–LAN-Edit )

image1814×1540 243 KB