I’m using 2.271 on both devices.

Well, its certainly possible that signal is dropping on the 4G, but as soon as I do a /etc/init.d/network reset (or power cycle the router), the connection comes back up just fine. This would indicate there is an adequate signal available.

I suspect dnsmasq may be where the issue lies, but I can’t seem to figure out whats going on.

Same thing this morning, I was connected to the MiFi overnight via ethernet. When I woke up, no internet connection and no local network connection on ethernet interface. Tried to print to a local printer but this did not work. Connected to Wifi and the page began printing immediately. Power cycled the MiFi and was able to print again from ethernet.