# Does a backup of Flint2 router using LUCi include the adguard home settings?

**URL:** <https://forum.gl-inet.com/t/does-a-backup-of-flint2-router-using-luci-include-the-adguard-home-settings/69936>\
**Category:** Router\
**Created:** [July 14, 2026, 1:00pm UTC](https://forum.gl-inet.com/t/does-a-backup-of-flint2-router-using-luci-include-the-adguard-home-settings/69936 "2026-07-14T13:00:21Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![charles2](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/c/9dc877/32.png) [@charles2](https://forum.gl-inet.com/u/charles2)\
**Post date:** [July 15, 2026, 9:03am UTC](https://forum.gl-inet.com/t/does-a-backup-of-flint2-router-using-luci-include-the-adguard-home-settings/69936/5 "2026-07-15T09:03:22Z")

</div>

Hi,

You can check which files are included in the LuCI.  
In LuCI, go to System → Backup / Flash Firmware:

 ![image](https://forum-static.gl-inet.com/original/3X/f/4/f4fbd7a4ce494e5fe91cfa4a1cb07809f7be7b15.png)  
Under Configuration, click Open list... and confirm that /etc/AdGuardHome/config.yaml is included.  
 ![image](https://forum-static.gl-inet.com/original/3X/b/8/b887c4559d6eac4236b322ab5bd5d9c25b2ca751.png)

If you would like to include any additional files or directories, add their full paths to the list, one path per line, and then click Save.

 ![image](https://forum-static.gl-inet.com/original/3X/e/4/e407d8a4f8a975ed3545d28b12b74417f2f4fedb.png)

For more detailed instructions, please refer to the following guide:

> [@How to Export/Import Backup Configuration Files via LuCI](https://forum.gl-inet.com/t/how-to-export-import-backup-configuration-files-via-luci/68190):
>
> Introduction When using a GL.iNet router, you may need to back up your current system configurations or restore previous settings after a reset or firmware upgrade. This guide will walk you through how to export and import your router's backup configuration files via LuCI. Part 1: How to Export Backup Configuration Files via LuCI Step 1: Access the LuCI Advanced Settings Log into your GL.iNet router's web Admin Panel (the default IP address is usually 192.168.8.1). On the left-hand menu, navi…

---

_[View the full topic](https://forum.gl-inet.com/t/does-a-backup-of-flint2-router-using-luci-include-the-adguard-home-settings/69936)._