# Enable IPv6 with when no PD (Prefix Delegation) is available (ND Proxy) for Mac and Windows devices

**URL:** <https://forum.gl-inet.com/t/enable-ipv6-with-when-no-pd-prefix-delegation-is-available-nd-proxy-for-mac-and-windows-devices/46388>\
**Category:** Router\
**Created:** [August 24, 2024, 5:30pm UTC](https://forum.gl-inet.com/t/enable-ipv6-with-when-no-pd-prefix-delegation-is-available-nd-proxy-for-mac-and-windows-devices/46388 "2024-08-24T17:30:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![logi](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/l/edb3f5/32.png) [@logi](https://forum.gl-inet.com/u/logi)\
**Post date:** [August 24, 2024, 5:30pm UTC](https://forum.gl-inet.com/t/enable-ipv6-with-when-no-pd-prefix-delegation-is-available-nd-proxy-for-mac-and-windows-devices/46388/1 "2024-08-24T17:30:56Z")

</div>

I have a new default configuration vanilla OpenWrt 24.05.4 installation with the **GL-MT6000** , my ISP TMHI (T-Mobile Home Internet) doesn't provide PD (Prefix delegation), I only get /128 and /64 addresses with a 64 subnet, I can't create more subnets, therefore, I think (I am not an expert) I have to use Neighbor Discovery Protocol (NDP) Proxy, these are the steps I followed in LuCI Interfaces:

**WAN6**  
1.- Created a WAN6 interface  
2.- Assigned to firewall-zone WAN6  
3.- DHCP Server --\> Ignore interface (disable DHCP for the interface)  
4.- IPV6 settings --\> Designated master **checked**  
--\> RA-service = **relay mode**  
--\> DHCPv6-service = **relay mode**  
--\> NDP-Proxy = **relay mode**

**LAN**  
1.- DHCP Server --\> IPv6 Settings --\> Designated master **unchecked**  
--\> RA-service = **relay mode**  
--\> DHCPv6-service = **relay mode**  
--\> NDP-Proxy = **relay mode**

Everything else is default, as soon as I save and enable, all the clients get immediately two IPv6 addresses ( **2607:** --\> T-Mobile), but, only the Linux (Debian, Ubuntu) and Android clients pass the **[www.test-ipv6.com](http://www.test-ipv6.com/)** test right away, the macOS, iOS, iPadOS and Windows clients, can take up to an hour for them to start passing the test, questions I have:

- Is this because the NDP process takes time to discover those devices?
- What is different with macOS, iOS and Windows IPv6 client's implementation that makes NDP so slow?

If I use another **GL-MT6000** router with GL's firmware that is based on OpenWrt as well, in the **GL GUI --\> Network --\> IPv6** there is an option called **IPv6 passthrough** , and if I use it, **ALL** the clients will get the same two **2607:** IPv6 addresses, but they also get a third address **fd15:** , **what is [GLi.Net](http://GLi.Net) doing differently?** I checked the MT6000 configuration in LuCi and I can see they are also using NDP Proxy with Relay Mode.

Any help will be appreciated to get clarity on what is going on and trying to speed up the NDP process for macOS, iOS, iPadOS and Windows devices while using vanilla OpenWrt with the MT6000. Thank you

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 11:41am UTC](https://forum.gl-inet.com/t/enable-ipv6-with-when-no-pd-prefix-delegation-is-available-nd-proxy-for-mac-and-windows-devices/46388/2 "2025-10-29T11:41:08Z")

</div>


