# Expectations for Brume3's USB Connector & Share Your Brilliant Use Cases!

**URL:** <https://forum.gl-inet.com/t/expectations-for-brume3s-usb-connector-share-your-brilliant-use-cases/63077>\
**Category:** Router\
**Created:** [August 20, 2025, 8:44am UTC](https://forum.gl-inet.com/t/expectations-for-brume3s-usb-connector-share-your-brilliant-use-cases/63077 "2025-08-20T08:44:49Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![9b9e69c2-4b75-4420](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/9/a587f6/32.png) [@9b9e69c2-4b75-4420](https://forum.gl-inet.com/u/9b9e69c2-4b75-4420)\
**Post date:** [August 20, 2025, 10:03am UTC](https://forum.gl-inet.com/t/expectations-for-brume3s-usb-connector-share-your-brilliant-use-cases/63077/4 "2025-08-20T10:03:00Z")

</div>

What kind of question even is this? Type-A, of course. There's 'thumb drives' that will fit nicely. They're easier, cheaper to replace than solder-on eMMC when the flash finally wears out. This is all the more important now that GL.iNet has decided to drop microSD/TF card support on all current devices.

No USB modem is going to come close to USB 3's 5 Gbps max. through-output, anyway so USB-C 10 Gbps is a pointless premise given the real-world 2.3 Gbps Ethernet limit.

 ![samsung_fit_plus](https://forum-static.gl-inet.com/original/3X/1/a/1ac884bf66c06692d56c867cefaf1986b4d04170.png)

> [@bruce](#):
>
> "I use a USB-A 4G LTE dongle in my camper van to create a always-on mobile WiFi network."

Then get a Slate Plus. There's no radios in a Brume.

> [@bruce](#):
>
> [...] a specific dongle for a project [...]

How about you populate the UART headers & assign it a port, instead? 115200 bps serial is more important for hardware hackers than some esoteric, unsupported 'dongle.'

Here's the problems with the Burme v3 & it's not even on the drawing board:

- Cortex A53, not A76
- 1GB where 2GB or 4GB is expected if not 8GB while 16GB is on the horizon
- 2.5 GbE when 5 GbE & 10 GbE is now mainstream while 40 GbE is falling in price every day

GL.iNet's primary wired devices for stationary use are poor comparisons, half-hearted imitations compared to [FriendlyElec's](https://www.friendlyelec.com/) year old offerings like their [R6S](https://www.friendlyelec.com/index.php?route=product/product&path=69&product_id=289). Only the GUI is 'better' but I personally don't dislike LuCI.

> [@bruce](#):
>
> It's truly inspiring to see how our community of innovators and tinkerers has pushed the boundaries of what's possible with the Brume 2.

My 2017 launched Certa is more up to date than my Slate AX... yet my Certa is EOL'd. _Real_ innovators **can't use** GL.iNet's SKUs with their stale kernels or let themselves be shackled to proprietary SDKs, Bruce. Pass that along to your PM(s), please.

```auto
root@certa:~# cat /etc/glversion && cat /etc/os-release | grep 'PRETTY_NAME' && uname -a
4.3.25
PRETTY_NAME="OpenWrt 22.03.4"
Linux certa 5.10.176 #0 Sun Apr 9 12:27:46 2023 mips GNU/Linux

```

```auto
root@slate-ax:~# cat /etc/glversion && cat /etc/os-release | grep 'PRETTY_NAME' && uname -a
4.8.0
PRETTY_NAME="OpenWrt 23.05-SNAPSHOT"
Linux slate-ax 5.4.164 #0 SMP PREEMPT Thu Jul 24 01:15:41 2025 aarch64 GNU/Linux

```

> [@Quad9 TLS Support](https://forum.gl-inet.com/t/quad9-tls-support/59701/15):
>
> Ahh... the joys of GL.iNet firmware not being in version sync across devices. I won't miss it if it were to ever leave. It's probably for the best your conf wasn't. The GL.iNet stock conf leaves a bit to be desired to properly tighten up security, privacy: cat \<\<- '\_\_EOF' \>\> /etc/dnscrypt-proxy2/dnscrypt-proxy.toml # edit your existing `.toml` to properly enable these security settings # in their respective sections or dnscrypt-pr…

---

_[View the full topic](https://forum.gl-inet.com/t/expectations-for-brume3s-usb-connector-share-your-brilliant-use-cases/63077)._
