Firmware 2.27 and GL-AR300M

junk1 · 2018-02-26T15:30:56.101Z

I am going to upgrade my AR300M to this new firmware, and I am not sure which file to download from GL.iNet download center.

The readme file says that the file “lede-gl-ar300m-* is for Dual band AR300M with ath10k Driver”. So which file should I use if I have a single-band AR300M?

Thanks

kyson-lok · 2018-02-27T01:19:25.960Z

lede-gl-ar300m-2.27-testing.bin is the file which you shold upgrade.

junk1 · 2018-02-27T02:50:36.541Z

Are you sure? When I attempt to upload that file, I get the message “Error: firmware is not for this hardware”.

glitch · 2018-02-27T09:45:39.861Z

You want the testing.tar one:

http://www.gl-inet.com/firmware/testing/lede-gl-ar300m-nand-2.27-testing.tar

Do not “reserve settings” - this screws things up (or did for me).

HTH,
Glitch

junk1 · 2018-02-27T15:14:39.776Z

Thanks, that was the right file. I followed your advice and did not reserve settings; everything seems to work fine.