# \[Firmware 4.2.3\] Slate Plus (GL-A1300) with Tailscale Exit Nodes

**URL:** <https://forum.gl-inet.com/t/firmware-4-2-3-slate-plus-gl-a1300-with-tailscale-exit-nodes/32322>\
**Category:** VPN, DNS, Leaks\
**Created:** [August 10, 2023, 11:43am UTC](https://forum.gl-inet.com/t/firmware-4-2-3-slate-plus-gl-a1300-with-tailscale-exit-nodes/32322 "2023-08-10T11:43:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![bring.fringe18](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bring.fringe18/32/11777_2.png) [@bring.fringe18](https://forum.gl-inet.com/u/bring.fringe18)\
**Post date:** [August 10, 2023, 5:43pm UTC](https://forum.gl-inet.com/t/firmware-4-2-3-slate-plus-gl-a1300-with-tailscale-exit-nodes/32322/2 "2023-08-10T17:43:15Z")

</div>

Tailscale is still ‘beta’ per the GL GUI. Exit nodes aren’t supported yet but here’s a workaround while we all wait:

> [@Tailscale settings lost on reboot](https://forum.gl-inet.com/t/tailscale-settings-lost-on-reboot/31524/22):
>
> This fixed it for me! I ended up just hardcoding my tailscale up command line into /usr/sbin/gl\_tailscale and it now works on reboot.

---

_[View the full topic](https://forum.gl-inet.com/t/firmware-4-2-3-slate-plus-gl-a1300-with-tailscale-exit-nodes/32322)._