Firmware 4.2.x is out as snapshot firmware

blalonge · 2023-02-28T17:11:44.430Z

I was wondering if 4.2 will be updated to openWRT 22.03.X for the GL-MT3000 ?

Was hoping to have zerotier 1.10 available but unfortunatly, only 1.8.4-2 is available on 21.02

casperpda1976 · 2023-03-01T06:11:07.879Z

Upgraded 4.2.0 snapshot on MT1300 but didn’t see the parental control and zerotier option. Is it not supported on MT1300 model.

bence · 2023-03-03T11:53:41.435Z

By regulation users cannot change country code in the UI.
But when you travel you have to change.

Would you mind sharing how to change the country code on Beryl AX? I suspect this might be the reason why some Wifi-5 devices don’t see the 5GHz network.

alzhao · 2023-03-06T11:01:44.765Z

bence:

I suspect this might be the reason why some Wifi-5 devices don’t see the 5GHz network.

May not relate to the country code. Do you have further details of this issue?

bence · 2023-03-06T11:34:31.998Z

alzhao:

bence:

I suspect this might be the reason why some Wifi-5 devices don’t see the 5GHz network.

May not relate to the country code. Do you have further details of this issue?

5GHz setup: security: WPA2+WPA3, mode: 11ac/ax, bw: 80Mhz, ch: Auto, SSID: shown

Visible by: 2018 and 2021 macbook pro, Xiaomi Mi Lite 5G
Not visible by: LG OLED B9 (Wifi 5) and Huawei MediaPad M3 (Wi-Fi 802.11 a/b/g/n/ac)

alzhao · 2023-03-06T12:12:56.519Z

Have you tried to change channel?
Also try change encryption to WPA2.

bence · 2023-03-06T16:20:35.856Z

Changing the channel solved the issue, however this defeats the point of using automatic channel selection, hence I was suggesting to properly select the country in the first place.

alzhao · 2023-03-07T03:10:28.570Z

bence:

Changing the channel solved the issue

Can you let me know which channle you changed to?
Which country are you in?

bence · 2023-03-07T06:38:19.263Z

alzhao:

Can you let me know which channle you changed to?
Which country are you in?

I changed to 108 from something over 160 which was auto-selected. I’m in Norway.

alzhao · 2023-03-07T07:15:05.200Z

bence:

I changed to 108 from something over 160 which was auto-selected. I’m in Norway.

I see.

Channel 161 supports 80Mhz
Channle 165 support 20Mhz
They are only limited to 25mWatt output, by regulation.

But in the router, if comes with Europe country code, this channels is disabled completely. This is due to some settings in the wifi driver and designed like this.

Even you can use, 25mWatt should be very weak signal. I am not sure why your current wifi use that.

bence · 2023-03-07T08:22:22.738Z

alzhao:

But in the router, if comes with Europe country code, this channels is disabled completely. This is due to some settings in the wifi driver and designed like this.

Even you can use, 25mWatt should be very weak signal. I am not sure why your current wifi use that.

I tell you why, because the only place where the router is available to purchase in Norway is the Amazon.com, the US site, so I got a router set to US. And regardless where on this globe I buy this, I should be able to change the country (also it’s a travel router, so I am expected to travel to different countries with it).

SmurfonToast · 2023-03-07T08:49:48.082Z

I just posted here on changing the country code for the Wifi Ranges available (note it doesn’t change the devices Country Code as displayed) Slate Plus Title Bar - #4 by SmurfonToast

Perhaps that will help?

k.

ngtimofeev · 2023-03-09T20:02:05.745Z

Sorry if it’s off topic, but noticed that on Brume2 (firmware v4.2.0 beta) the number of Clients connected to the WireGuard Server is always zero (0), regardless of how many is actually connected.

image2594×821 82.1 KB

juane · 2023-03-09T20:34:28.645Z

At least in nightlies for ax1800 flint has be resolved two nightlies ago.

DaWeav · 2023-03-11T01:22:53.506Z

DaWeav:

…Then I tried to uboot and attempted both v3 and v4 .img files, but that failed too. So I can’t even downgrade it back to the stable v3.

UPDATE FAILED

Something went wrong during updateProbably you have chosen wrong file (too big or too small) or you were trying to update ART on device with unknown FLASH type (and size) which is not allowed. Please, try again or contact with the author of this modification. You can also get more information during update in U-Boot console.

I was able to get a UBoot firmware to flash over the version 4 snapshot version on my 750 Slate. Instead of trying to use the latest version 3 UBoot image, I had to use an older version 3 UBoot image. Then I had to update a few times to various version 3 versions to get to the latest stable version 3 firmware.

tmash · 2023-03-17T00:20:45.291Z

Latest firmware 4.2.0 , what appears to be from Germany as set in Wireless regulatory (DE)
Channel 161 is visible which shouldn’t be, it’s not functional and halts the entire wireless function.
Tailscale subnet does not advertise to Tailscale.
Samba File sharing is not working with v2/v3 options.
DLNA works fine.

Edit: Just tested out WebDAV with external HDD, managed to do 800Mbit with EXT4 over Wi-Fi, very impressive.

ntrazivuk · 2023-03-17T12:32:39.090Z

I see that 4.2.3 is now in stable softwares for Flint. However, I see a lot of bugs, even in GUI, especially in Tailscale section where the options change the names to some variables, so i.e. instead of Allow access Wan, there is some variable name, when you refresh the browser, it is back to “allow access wan”.
Also, DNS leaks on Wireguard still happen from time to time, i.e. when you reboot the router which is acting as a WG client.

On the other subject, will software 4.3 have the option to choose your own headscale server, instead of hard coded Tailscale.com ?
Hope we will be able to change this from GUI?
Also, you mentioned advertise as exit node option will be available in 4.3, right?

alzhao · 2023-03-17T14:40:33.263Z

tmash:

Channel 161 is visible which shouldn’t be, it’s not functional and halts the entire wireless function.

You are right. That is a bug.

hansome · 2023-03-19T13:12:57.446Z

ntrazivuk:

Also, DNS leaks on Wireguard still happen from time to time, i.e. when you reboot the router which is acting as a WG client.

Have you enabled the “Block Non-VPN Traffic” option? How do you confirm DNS leaks happen?

tmash · 2023-03-20T19:25:24.329Z

Tailscale advertise subnet finally works after a reboot, is there an exit node option?