# Firmware upgrade not working on AR-300M uboot

**URL:** <https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380>\
**Category:** Router\
**Created:** [May 1, 2023, 3:25pm UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380 "2023-05-01T15:25:14Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![makedit](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/makedit/32/4914_2.png) [@makedit](https://forum.gl-inet.com/u/makedit)\
**Post date:** [May 1, 2023, 3:25pm UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380/1 "2023-05-01T15:25:14Z")

</div>

When i start in failsafe mode it cannot be updated with image `openwrt-ar300m-3.203-0701.img` or newer But openwrt bin images works, for example `openwrt-22.03.4-ath79-nand-glinet_gl-ar300m-nand-initramfs-kernel.bin`

Serial console reports this

```auto
open file: /flashing.html
stop eth interface!!
HTTP upload is done! Upgrading...

****************************
* FIRMWARE UPGRADING *
* DO NOT POWER OFF DEVICE! *
****************************

Executing: nand erase; nand write 0x80800000 0 0x1120146

no devices available

no devices available
## Error: HTTP ugrade failed!

```

Other try shows this

```auto
HTTP upload is done! Upgrading...

****************************
* FIRMWARE UPGRADING *
* DO NOT POWER OFF DEVICE! *
****************************

Executing: nand erase; nand write 0x80800000 0 0xF40146

no devices available

no devices available
## Error: HTTP ugrade failed!

```

This log is with this uboot, [uboot-for-qca95xx/uboot-gl-ar300m-20220216-md5-97ff7bb80cbf129fa21f34ded1559ff8.bin at master · gl-inet/uboot-for-qca95xx · GitHub](https://github.com/gl-inet/uboot-for-qca95xx/blob/master/bin/uboot-gl-ar300m-20220216-md5-97ff7bb80cbf129fa21f34ded1559ff8.bin)

I updated uboot because the one It had was not working either.

The old uboot had two upload buttons for NOR and NAND.  
How does this works in current uboot? It uses the file name or switch to decide if uploading one or other?

---

<div class="post-metadata">

**Author:** ![robotluo](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/robotluo/32/17434_2.png) [@robotluo](https://forum.gl-inet.com/u/robotluo)\
**Post date:** [May 4, 2023, 1:45am UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380/2 "2023-05-04T01:45:54Z")

</div>

> [@makedit](#):
>
> ```auto
> Executing: nand erase; nand write 0x80800000 0 0xF40146
> 
> no devices available
> 
> no devices available
> 
> ```

It seems that nand is not recognized. Have you updated uboot?

> [@makedit](#):
>
> The old uboot had two upload buttons for NOR and NAND.  
> How does this works in current uboot? It uses the file name or switch to decide if uploading one or other?

The new uboot identifies firmware types by file suffixes, which are nand firmware if the suffix is img and nor firmware if it is bin.

---

<div class="post-metadata">

**Author:** ![makedit](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/makedit/32/4914_2.png) [@makedit](https://forum.gl-inet.com/u/makedit)\
**Post date:** [May 15, 2023, 5:38pm UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380/3 "2023-05-15T17:38:18Z")

</div>

> [@robotluo](#):
>
> It seems that nand is not recognized. Have you updated uboot?

Yes, is with uboot [uboot-for-qca95xx/bin/uboot-gl-ar300m-20220216-md5-97ff7bb80cbf129fa21f34ded1559ff8.bin at master · gl-inet/uboot-for-qca95xx · GitHub](https://github.com/gl-inet/uboot-for-qca95xx/blob/master/bin/uboot-gl-ar300m-20220216-md5-97ff7bb80cbf129fa21f34ded1559ff8.bin) and I updated it because the one It had was not working either.

I’ve other GL-AR300M with old uboot which works right

---

<div class="post-metadata">

**Author:** ![divinehawk](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/d/c0e974/32.png) [@divinehawk](https://forum.gl-inet.com/u/divinehawk)\
**Post date:** [July 27, 2023, 1:25am UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380/5 "2023-07-27T01:25:09Z")

</div>

Apparently I bought the one without a NAND. Nevermind. GL-AR300M16

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 4:23am UTC](https://forum.gl-inet.com/t/firmware-upgrade-not-working-on-ar-300m-uboot/29380/6 "2025-10-29T04:23:14Z")

</div>


