# Firmware

**URL:** <https://forum.gl-inet.com/t/firmware/5166>\
**Category:** Router\
**Created:** [November 22, 2018, 4:26pm UTC](https://forum.gl-inet.com/t/firmware/5166 "2018-11-22T16:26:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![asholino](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/c57346/32.png) [@asholino](https://forum.gl-inet.com/u/asholino)\
**Post date:** [November 22, 2018, 4:26pm UTC](https://forum.gl-inet.com/t/firmware/5166/1 "2018-11-22T16:26:25Z")

</div>

Hi all  
i did the personalisation of my gl-ar300-m lite  
so i wanted to toggle all sotware that i don’t need as samba etc  
how can i create the fimware backyp to make it as master for next routers ?  
to avoid maybe connection lose problems so i want a make master flash with what i need i mean  
Thank you

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [November 23, 2018, 1:21am UTC](https://forum.gl-inet.com/t/firmware/5166/2 "2018-11-23T01:21:32Z")

</div>

Check image builder in our github.

You can zip an image with only the packages you need.

---

<div class="post-metadata">

**Author:** ![asholino](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/c57346/32.png) [@asholino](https://forum.gl-inet.com/u/asholino)\
**Post date:** [November 23, 2018, 5:57am UTC](https://forum.gl-inet.com/t/firmware/5166/3 "2018-11-23T05:57:21Z")

</div>

thank you can you give me a link and a guide?

---

<div class="post-metadata">

**Author:** ![alzhao](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/a/5f9b8f/32.png) [@alzhao](https://forum.gl-inet.com/u/alzhao)\
**Post date:** [November 24, 2018, 7:17am UTC](https://forum.gl-inet.com/t/firmware/5166/4 "2018-11-24T07:17:17Z")

</div>

> **[GitHub - gl-inet/imagebuilder: Warning！Please look at 'GL.iNET Imagebuilder...](https://github.com/gl-inet/imagebuilder)**
>
> Warning！Please look at 'GL.iNET Imagebuilder Introduction' section. - GitHub - gl-inet/imagebuilder: Warning！Please look at 'GL.iNET Imagebuilder Introduction' section.

check the readme.

---

<div class="post-metadata">

**Author:** ![bruce](https://forum-assets.gl-inet.com/user_avatar/forum.gl-inet.com/bruce/32/35649_2.png) [@bruce](https://forum.gl-inet.com/u/bruce)\
**Post date:** [October 29, 2025, 2:57am UTC](https://forum.gl-inet.com/t/firmware/5166/5 "2025-10-29T02:57:20Z")

</div>