Flint 3 / GL-BE9300: IoT Wi-Fi Instability, VAP Create Error, and Camera Disconnections After Wi-Fi Changes

[will.qiu]

Hi

Sorry for the delayed reply.

Regarding the IoT Wi-Fi issue:
We have already added the IoT Wi-Fi in the v4.9.0 beta firmware. Could you please upgrade to this version and check whether the issue still persists?

Download link:

GL.iNet download center

Upgrade guide:

Local Upgrade - Upgrade - GL.iNet Router Docs 4

---

Regarding the dms not-supported sta issue:
This is usually caused by limited compatibility on the IoT/Wi-Fi client device side. Please try the following suggestion and see whether it helps:

[BUG REPORT] Flint 3 (GL-BE9300) – Watchdog Reset triggered by hostapd EAPOL Retry-Loop & DMS Conflict

Hi Could you please clarify the following: Can this issue be reproduced consistently? What firmware version is your Flint 3 currently running? You can find it under System → Upgrade Please export the full device logs and send them to us via private message so we can analyze further Also, please try the following to see if it helps: Try setting the 2.4 GHz Wi-Fi mode to 802.11n/g, since some IoT devices may not work well with ax/be modes. uci set wireless.wifi0.hwmode='11ng' uci commit wir…

---

Regarding the LAN 1 disconnection issue:
At the moment, it is unclear whether this is related to the physical cable/port or something else.

Please try the following:

1. Replace it with some different Ethernet cables that are known to work properly
2. Connect the device to a different LAN port
3. Insert an unmanaged switch between the device and the BE9300 to see whether it improves the situation