# Flint 3 VLAN and WiFi Bridge support

**URL:** <https://forum.gl-inet.com/t/flint-3-vlan-and-wifi-bridge-support/63897>\
**Category:** Router\
**Created:** [September 11, 2025, 3:09pm UTC](https://forum.gl-inet.com/t/flint-3-vlan-and-wifi-bridge-support/63897 "2025-09-11T15:09:57Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![9b9e69c2-4b75-4420](https://forum-assets.gl-inet.com/letter_avatar_proxy/v4/letter/9/a587f6/32.png) [@9b9e69c2-4b75-4420](https://forum.gl-inet.com/u/9b9e69c2-4b75-4420)\
**Post date:** [September 11, 2025, 6:51pm UTC](https://forum.gl-inet.com/t/flint-3-vlan-and-wifi-bridge-support/63897/2 "2025-09-11T18:51:20Z")

</div>

It sounds like you're going to want to adapt the following HOWTO for a couple of different VLANs & AP/SSIDs assigned to different radios. I would suggest looking at the Flint v2 (GL-MT6000) however. The HOWTO will still work & the Flint v2 is fully supported by 'pure'/'vanilla' OpenWrt if/when you find yourself needing to go beyond the limitations of a SOHO-style 'appliance' approach to networking.

> [@How to set up the VLAN for IoT Wi-Fi on Flint 3(GL-BE9300)](https://forum.gl-inet.com/t/how-to-set-up-the-vlan-for-iot-wi-fi-on-flint-3-gl-be9300/63364/1):
>
> For Flint3 (GL-BE9300) only. Describes how to configure a dedicated IoT network on SSH by creating a VLAN (VID 25), a bridge, DHCP, firewall rules, and a separate 2.4 GHz Wi-Fi SSID. 1. Define VLAN 25 on eth1 We create a VLAN subinterface eth1.25 using IEEE 802.1Q tagging. uci set network.eth1\_25=device uci set network.eth1\_25.type='8021q' uci set network.eth1\_25.ifname='eth1' uci set network.eth1\_25.vid='25' uci set network.eth1\_25.name='eth1.25' 2. Create the IoT Bridge We define a new b…

---

_[View the full topic](https://forum.gl-inet.com/t/flint-3-vlan-and-wifi-bridge-support/63897)._
